Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

During consultation procedures between forest owners and the Sámi, data on, e.g., reindeer lichen biomass on the current site is needed. Hitherto, the existing methods of measuring lichen cover and biomass has been either objective methods such as the Point Intercept method, which is time consuming, or some sort of subjective visual estimation, which is faster but less accurate. However, both these methods are sensitive to different observers and/or to different inventories. This paper addresses the further development and evaluation of a photographical inventory method that uses colour distribution in images to estimate lichen biomass. During the autumn of 2011 six different locations, with different grazing pressure and lichen cover, in Norrbotten county were inventoried using both the Point Intercept method and the photographical method, complemented with collection of biomass samples.

Titel: Omvärlden påverkar: En studie av hur revisionsbyråernas marknadsföring har påverkats av den avskaffade revisionsplikten för mindre och medelstora företag.Nivå: Kandidatuppsats i företagsekonomi; MarknadsföringFörfattare: Reine Haddad och Louise MattssonHandledare: Jonas KågströmDatum: 2012- JuniSyfte: Med uppsatsen vill vi undersöka om revisionsbyråernas marknadsföring förändrats i samband med att revisionsplikten för mindre bolag avskaffats, det vill säga om marknadsföringen påverkas av omvärldsfaktorer.Metod: I studien används en abduktiv ansats där information samlats in dels via Internet (WayBack Machine) och dels genom att ta del av annonser från en revisionsbyrå. För att tydliggöra materialet sammanställdes det i frekvenstabeller, wordles och diagram.Resultat & Slutsats: I enlighet med vad den valda teorin framställer ser vi att även revisionsbyråerna ändrar delar av sin marknadsföring när förändringar i omvärlden sker. Omfattningen av förändringarnas påverkan på marknadsföringen varierar från revisionsbyrå till revisionsbyrå, bland annat beroende på revisionsbyråernas syn på marknadsföring, hur stora förändringarna i omvärlden är och hur snabbt revisionsbyråerna tar till sig dessa förändringar.Uppsatsens bidrag: Vårt examensarbete har bidragit med att ge en bild av hur revisionsbyråernas marknadsföring påverkas av förändringar i omvärldsfaktorer. Detta kan vara användbart då marknadsföraren måste ta dessa omvärldsfaktorer i akt vid planering och utformning av marknadsföringen.Nyckelord: Revisionsplikt, revisionsbyrå, marknadsföring, påverkan och omvärldsfaktorer..

If you keep cattle in a herd outside all year round on big varying grounds, their possibilityto perform their natural behaviour increases. This way of keeping cattle requires that youprovide them with their other needs, like shelter and a dry and clean resting place.According to the animal welfare authority´s regulations on livestock farming, only animalsthat are suited to stay outside during the cold season are allowed to be kept outside. Theyshould also have access to a shelter or another building that gives them protection from theweather and wind and provides a dry and clean resting place.Research has shown that as long as cattle do not get exposed to precipitation and wind theywill manage low temperature well. Some of the things that will affect how well the animalshandle different climates are the isolation ability of the fur, the animals´ body size and thefeed intake. A dry lying place that is both insulating and moisture absorbent is also of greatimportance.

Syftet med denna studie var att ta reda på hur mycket biologi man kan få in i verksamheten genom att uppmärksamma när ämnet naturligt visar sig hos barnen under utomhusvistelse, i deras egna lekar, upptäckter och utforskande. Bakgrunden till min undersökning är att den svenska förskolan sägs befinna sig i en brytningstid, med större fokus på ämneskunskaper och att läroplanen samtidigt poängterar vikten av att ta tillvara barns perspektiv, frågor och idéer. För att få svar har jag gjort observationer på två olika förskolor/avdelningar. Även enkäter har skickats till de medverkande pedagogerna. Resultatet av mina observationer visar att barnen ofta uppmärksammar olika djur och växter och andra områden inom ämnet biologi när de vistas ute i naturen.

This report presents an investment calculation based on an assumed initial investment of a new saw line to an existing sawmill. In order to get as close to reality as possible, we have received data material from northern forest owners who recently made an initial investment in their sawmill in Kåge. In order to calculate and evaluate investments are several different methods, but we, we have chosen to use the discounted cash flow method. The method sums up with the help of a fixed cost of capital together with any future costs and revenues, thereby giving a present value of the investment. We also do a sensitivity analysis to examine how selected factors affect the investment research they change. The study is carried out to a fictitious investment, and therefore the result should not only be studied as a result of the figures. The purpose of this study was that with the help of an investment calculation studying the profitability of a hypothetical investment, and by means of a sensitivity analysis to study the sensitivity of investment to changes. The result demonstrates that the calculations according to the present value method requires a lot of information of the prospective investment.

This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

The use of combi-drilling during spring tillage has become very common in southern Sweden in recent years. Combi-drilling leads to fewer passes on the field and better plant nutrient utilisation. An example of a combi-drill is the Väderstad Rapid, which is very widely used in spring tillage in southern Sweden. The Rapid has separate fertiliser and seed coulters, which means that the draught requirement is relatively high. It thus requires large, heavy tractors, which compact the soil and are comparatively expensive to buy and run. A few years ago the Finnish combi-drill Tume Nova Combi came onto the Swedish market.

ProblemThe manufacturing industry is a mature industry where the profit margins are small and the competition is hard. This makes it hard for both manufacturers and resellers to gain market shares and reach reasonable profit margins only by selling products. Therefore Swecon who is reseller for Volvo Construction Equipment tries to find alternative methods and ways to increase their profit. An alternative source of income could be to develop the range of services that are connected to the ground products.PurposeThe purpose of the thesis is to examine how Swecon in southern Sweden can improve their offers of existing services connected to the ground product and investigate the demand of new such services.MethodThis study is based on a qualitative study of five of Swecons local offices and five of Swecons customers. The empirical framework is mostly based on personal interviews but in some cases information was retrieved by using phone interviews.

The hotel is located on Skatholmen in the archipelago of Stockholm, Värmdö county. The hotel building has an open structure characterized by hospitality and the nature outside. The rooms have stunning views of the island landscape and lush forest. With biodiversity and valuable nature in mind, the building has been designed with a structure that should not be too intrusive in the surrounding landscape. The building is meant to blend into the dark silhouette of the island and to give a light footprint on the topography of the landscape.The use of well-chosen materials and similar design, both in plan and facade, creates a consistent building despite the building's somewhat playful expression.

The Scanian woodfences has been determined by two mainly elements: Scania's composition of tree species, with a large element of deciduous forest, and the local building tradition which has more in common with the European continent than the Swedish tradition. By examining responses from ethnological question lists deriving from the first half of the 1900s, combined with literature studies, I have been able to deepen and broaden the knowledge behind the various fencing design. In addition I ?ve constructed maps which could illustrate their historical geographic distribution.I have come to the conclusion that there was three main types of woodfences that was most common until the barbed wire was introduced in the early 1900s and later on replaced the elderly woodfences. Common for the three main types is that the base material was made out of Juniperus communis, this largely because of its durability against rot.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

När ett haveri inträffar uppstår direkt en mängd olika kostnader i form av underhållsinsatser, reparationsmaterial och administrationsinsatser. Utöver dessa kostnader förloras även de intäkter som maskinen genererar samt täckningen för de fasta och rörliga kostnaderna. Alla dessa kostnader skall täckas av de värdeskapande enheterna på företaget och påverkar det finansiella resultatet negativt. För att förbättra ett företags lönsamhet ökas antingen intäkterna eller så reduceras kostnaderna. Trots detta är det för många företag okänt hur stor kostnaden faktiskt är då en maskin står stilla.Arbetets uppdragsgivare är Konecranes Machine Tool Service (MTS), ett företag som erbjuder underhållstjänster och underhållslösningar till företag inom verkstadsindustrin.

With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good carrying capacity along roads with good carrying capacity. The goal with this work was to create a method to find the stands with high carrying capacity located near roads with high carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.