The purpose of the study was to determine the attitudes of the teachers of Reggio Emilia inspired preschools concerning the science work with children between the ages of one and three, as well as their opinions on how the physical preschool environment and the choice of materials influence their scientific work. The study was conducted in three departments of two different kindergartens. Although both kindergartens called themselves Reggio Emilia inspired, their working methods and their environments differed largely. None of them were originally built as Reggio Emilia inspired preschools. One of the kindergartens strived to design their indoor environment the same way as the preschools of Reggio Emilia are constructed, there for they were setting up different stations where the children themselves have the opportunity to explore various scientific areas.

Mechanical scaling is one of the most complex operations of all in the mining process. The operators are using both hearing, sight and feel to read the rock and to know where to scale and where to leave. They say they go on gut feeling in great extent, something that comes with experience. The scaling machine is placed into the edge of unsecured and newly blasted rock to hammer off the blocks that has become loose after the blast, but not enough to fall down. It goes without sayingthat it is a risky job.

During the past years fire has been identified as an important factor for nature conservation in the forest landscape. To accurately quantify the size of a burnt area is obviously important, but also to quantify the degree of fire damage to the tree canopy. Such data are important for assessing the conservation value, and to support planning and management of the burned area in the future. I have examined how to estimate the status of tree crowns after fire from interpretation of aerial photographs. This is possible because fire changes the structure of tree crowns and this influences the colours in aerial photographs by spectral reflection. Included in the study are four areas, three of which burned in 2005 and one in 2006.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

This study was made on former agricultural areas that had been planted with spruce or pine, in the county of Västerbotten. The goal of the project was to investigate suspected deficiency of boron in these areas. Several objects have been reported for possible deficiency and some of these have the characteristic symptoms of boron-deficiency. The hypotheses are that 1) Boron deficiency is present at several of the investigated objects. 2) Planting of forest on cultivated postglacial sediments leads to a successive podzolisation with a decreasing content of organic matter in the mineral soil, due to decomposition, and a decreasing pH in the soil, even on locations that have been added lime. To be able to confirm or reject the hypotheses a number of tests were performed.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

Clearcutting systems have been the dominating silvicultural approach during the last decades in the Nordic countries. While economically rational, it is also leading to a trivialisation of the flora and fauna, and may result in negative reactions of people in urban settings. As a consequence of this, and a more diversified view on which goods and services forests should deliver, there is an increasing interest in broadening the range of silvicultural methods that are used. The term continuous cover forestry (CCF) represents a suite of methods that have gained increasing interest in the Nordic countries. In CCF a considerable amount of the trees are left after harvest to favour values that require a continuity of tree-covered areas. There are thus hopes that this method will meet the needs for maintaining biodiversity and satisfy social and cultural values.

This work was conducted during spring and summer 2012 together with the company Uppsala Academy of Management as the principal. The two main objectives for the work are that: ? Make a comparison between the measured volume in the standing forest and the measured volume at the industry on Uppsala Academy of Managements actual stumpage sale volume to see how well it conforms. ? Examine if the buyers see any particular advantages or disadvantages of actual stumpage sale volume and what they think of Uppsala Academy of Managements actual stumpage sale volume and structure in general. I chose to use actual stumpage sale volume from the tree years 2009, 2010 and 2011 in my work. I divided the actual stumpage sale volume following four categories which was pine, spruce, pine/spruce and seed trees. After that I picked out sixteen actual stumpage sale volumes from each category to be a part of the work.

Med nuvarande trend kommer snart all skog bortsett från de skyddade områdena att vara påverkade av trakthyggesbruk. Denna studie inom Vilhelmina kommun och Vilhelmina Model Forest visar hur skogslandskapet i sydöstra delen av Vilhelmina har påverkats sedan trakthyggesbruket infördes, med störst påverkan i den sydöstra delen och minst i den västra delen närmast fjällkedjan. Detta arbete har syftat till att analysera hur skogar som inte blivit brukade med trakthyggesbruk och nyckelbiotoper är fördelade geografiskt, och hur de sammanfaller geografiskt, inom ett stort landskapsavsnitt i den sydöstra delen av Vilhelmina kommun. Studien har också syftat till att visa om storleken på skogsområden med sammanhängande opåverkad skog har betydelse för antal och areal registrerade nyckelbiotoper och om det finns någon trend från sydöst till väst. Alla analyser för arbetet har skett i ArcGIS med hjälp av kartmaterial av registrerade nyckelbiotoper och kalavverkade skogar från Vilhelmina Model Forest. Resultatet visade att 63 % av arealen nyckelbiotop i den sydöstra delen av kommunen ligger i skog som inte blivit genomhuggen med trakthyggesbruk.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

Aspen (Populus tremula L.) and goat willow (Salix caprea L.) are two important tree species in the aspect of nature conservation. Due to the elimination of forest fires, a former negative attitude towards deciduous trees in forestry and a strong herbivore pressure, these tree species have been negatively affected during the last fifty years. The aim of this study was to investigate whether the occurrence of aspen and goat willow could be related to either human impact or to site properties, such as ground moisture and vegetation type. A side study included an inventory of a number of cyanobacterial tree lichens on aspen and goat willow in order to try to relate the occurrence of these lichens species to stand history and stand properties. The study was performed in Hamra State Forest in northern Dalarna. Nature reserves were compared with stands in managed areas.

The study was conducted in Jönköping County Chamber of fibrillation and is about change and improvement of process modeling technology. The process for treating patients with fibrillation is in the need to evolve and improve. In order to develop the care they needed a current state description which usually is made with the traditional process modeling tool.Many scientists and health professionals is in the opinion that this technology gives a too rigid image to describe the care processes. It also does not sufficiently take into account the human aspects. This reasoning suggests that the process modeling technology in healthcare is in the need to develop multiple perspectives.

This report was written as a final thesis within the Department of forest economics at the Swedish University of Agricultural Sciences as a completion of the M.SC Forestry programme. The aim of this study was to create a model that, with respect to given stock levels, temperature, fuel usage and fuel price, would identify the optimal levels for purchase of bio fuels, optimal levels of incineration of bio fuels and the sum of the present values of all costs. The model would be applicable for a larger district heating plant. Data regarding temperature were received from SMHI. Information considering fuel prices was taken from the Swedish Forest Agency and the facts about fuel usage were collected from a large district heating plant, located in the southwest of Sweden. For the temperature, a sinus curve was adapted to describe the temperature over a year.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

Som skoglig sektorsmyndighet är det Skogsstyrelsens uppgift att omsätta regeringens skogspolitiska mål i praktiken. De behöver därför ha kunskap om deras arbete faktiskt ger effekter i skogsbruket. Ett verktyg för att undersöka effekter är utvärderingar. Genom en utvärdering kan Skogsstyrelsen se vilka effekterna är samt få ett underlag till att förändra och utveckla framtida projekt. Denna studie syftade till att utvärdera effekter hos deltagare avseende kunskapsinhämtning och användningsgrad samt deltagarnas upplevelse av vattenkvällarna i projektet Skogsbruk och vatten inom Landsbygdsprogrammet hos Skogsstyrelsen i Östergötland.