The hotel is located on Skatholmen in the archipelago of Stockholm, Värmdö county. The hotel building has an open structure characterized by hospitality and the nature outside. The rooms have stunning views of the island landscape and lush forest. With biodiversity and valuable nature in mind, the building has been designed with a structure that should not be too intrusive in the surrounding landscape. The building is meant to blend into the dark silhouette of the island and to give a light footprint on the topography of the landscape.The use of well-chosen materials and similar design, both in plan and facade, creates a consistent building despite the building's somewhat playful expression.

The Scanian woodfences has been determined by two mainly elements: Scania's composition of tree species, with a large element of deciduous forest, and the local building tradition which has more in common with the European continent than the Swedish tradition. By examining responses from ethnological question lists deriving from the first half of the 1900s, combined with literature studies, I have been able to deepen and broaden the knowledge behind the various fencing design. In addition I ?ve constructed maps which could illustrate their historical geographic distribution.I have come to the conclusion that there was three main types of woodfences that was most common until the barbed wire was introduced in the early 1900s and later on replaced the elderly woodfences. Common for the three main types is that the base material was made out of Juniperus communis, this largely because of its durability against rot.

Biogas is a gaseous fuel, rich in methane, produced through a biological route in an anaerobic digester. A gas engine generates combined heat and power, which can be used at the farm to reduce energy cost. The process also generates a digestate, with better utilization of nutrient compared to cattle manure. The aim of this study is to analyze the profitability of a farm-scale biogas plant for combined heat and power (CHP) at Wapnö. Wapnö is an agriculture company located in the southern part of Sweden.

With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good carrying capacity along roads with good carrying capacity. The goal with this work was to create a method to find the stands with high carrying capacity located near roads with high carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

Icke vinstdrivande organisationers förtroendeskapande webbkommunikation är en undersökning som syftar till att öka förståelsen för hur icke vinstdrivande organisationer etablerar förtroende i sin kommunikation på webben. Genom att analysera hur de tre icke vinstdrivande organisationerna Forest Stewardship Council (FSC), KRAV och Fairtrade skapar förtroende i textmaterial presenterat på respektive organisations hemsida söker uppsatsen belysa hur olika förtroendeskapande grepp används av icke vinstdrivande organisationer för att etablera förtroende mot allmänheten. Analysen visar att det mest förekommande sättet att skapa förtroende mot allmänheten bland de studerade icke vinstdrivande organisationerna är att framhäva sin expertis på det område organisationen verkar. Uppsatsen öppnar upp för ett nytt forskningsområde med fokus på hur den icke vinstdrivande organisationen etablerar förtroende på webben. För vidare forskning kan det vara intressantatt öka antalet analyserade organisationer för att öka möljligheten att fastslå samband mellan hur stor grad av förtroende allmänheten upplever sig ha för en organisation och vilken typ av förtroendeskapande kommunikationen organisation använder sig av..

This study investigates whether the site index curve method (SICM) and the growth intercept method (GIM) can be used for site index predictions in younger Norway spruce (Picea abies (L.) Karst.) stands than recommended by current guidelines. For SICM it was thus investigated whether the method could be used for stands younger than ten years, and for GIM it was tested whether a starting point for the intercept measurements could be used below the recommended 2.5 meter. This was tested based on measurements taken from experimental stands in Tönnersjöheden Research Forest. For GIM it was found that the method can only be used when the TH-trees of a stand have five complete intercepts above 2.5 meters. For the method to be applicable beyond this, it will be necessary to adapt the underlying equations, perhaps following the Canadian example where a 1.3 meter intercept start is used. In conclusion it is not currently possible to apply the approach beyond the current recommendations. For SICM, SI predictions are accurate for the study area already form year three.

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

The concerning issue of declining number of hunters in North America is also apparent in Europe and Sweden. When the bulk of research found on human dimensions and hunting participation has almost exclusively been done in the United States, this report seeks to add to the needed knowledge on a national level focusing on the causes of hunter declines related to social factors within Sweden. Using hunter data reaching from commune, county to National level, this report describes the correlation between a number of variables and the hunting participation in Sweden.The typical Swedish hunter lives in an area with low population density, the person usually has higher education, the living situation is stable with no recent moving and there is relatively good access to forest land. Persons with weaker connection to the Swedish culture such as foreign citizens, people with foreign background and people born outside ?the Nordic countries? are less likely to start hunt or participate in hunting.A strong relationship was found between the favorite game, moose (Alces alces), and the amount of hunters participating in the hunting.

Med ett växande fokus på ett långsiktigt hållbart samhälle som tar ansvar för miljön strävar fordonstillverkare efter att sänka energiförbrukningen på sina fordon. Detta arbete behandlar hur man kan sänka bränsleförbrukningen för lastbilar med påbyggnader. En påbyggnad kan t.ex. vara en kran, en lastväxlare eller en betongpump. En metod för att sänka energiförbrukningen är att sänka det varvtal som lastbilens dieselmotor arbetar vid.

95% of the productive forest land in Sweden are now being exploited for forestry. The new Forestry Act of 1993 equate the goal of production and the environmental goal which means that the objective for forestry is a sustainable yield, while the biological diversity must be preserved. Recent years results from the inventories of the Board of Forestry show declining trends in how nature conservation aspects taken into consideration at the felling sites.The aim of this study is to investigate what happends with the nature consideration taken at felling sites in the long run. 20 final fellings in the county of Östergötland were re-inventoried 7-9 years after final felling. These felling sites had previously been inventoried before final felling (P0) and one year after final felling (P1) in the inventory Polytax by the Board of Forestry.

?Development of methods for the planning and implementation of ditch clearing with modern methods?, is a long title for an exam work but that is what this report describes. In Sweden, we have a limited area available, and with the present development with increasing market oil prices, and enormous forces on the renewable energy sources, we need every hectare possible to protect the output of the forests. So with this in mind, many people are now considering how to increase the production of the forests that are already available. A part of production increases is to manage the existing forests, and not to allow this area to go to cultivation or become marshland. We manage our forests in a way that benefits the environment, and we consider that our working practice over the years has shown us to be correct and well functioning. A part of our way of producing forests is to ensure that we have functioning drainage systems in the forest holdings which we administer. The responsible at Holmen Skog requested a good method to make inventories of the drainage systems of Holmen forests. This Degree Project is about ways to identify and implement drainage systems with modern methods. It deals with authorities regulations, and how they operate in different counties.

Bakgrund      Skogsmaskiner har under många år förstört både fornlämningar och gränsmärken. Idén till databasen/tjänsten uppkom av egna erfarenheter vid en förrättning, där flertalet gränsmärken hade blivit överkörda av skogsmaskiner. Syfte              Examensarbetets syfte är att lyfta fram en ny idé för att minska skadorna på fornlämningar och gränsmärken som skogsmaskiner orsakar, samt hur lägesnoggrannheten påverkar den nya tjänstens ändamål.Metod           Examensarbetet består av en litteraturstudie med syfte att besvara och ge en bakgrund till problemställningen. För att undersöka hur vanligt det är att lantmätare/mätingenjörer stöter på att gränsmärken blivit skadade av skogsmaskiner genomfördes en enkätundersökning. För en djupare inblick av lägesnoggrannheten på utrustningen i skogsmaskiner och vilken kvalitet på koordinaterna som krävs för en mer ändamålsenligt tjänst gjordes en intervjustudie.Slutsats         De uppgifter som finns tillängliga idag ska vara användbara när det gäller fornlämningar, för en ändamålsenlig tjänst som ska fungera ute i skogen där lägesnoggrannheten inte alltid är den bästa.

Fast pyrolysis is a method for converting biomass into three energy rich products: char, gas and bio-oil, where the latter is most interesting.  Pyrolysis is an endothermic process where biomass is heated in an anaerobic environment and, with the right operating conditions, up to 80 %wt bio-oil can be extracted. Key parameters for fast pyrolysis are: stable reactor temperature (~500°C), short residue time for gas in the reactor (<2 s) and a very high heating rate for the biomass. Today there are several different process solutions for fast pyrolysis, where fluidized beds and rotating cones are most developed. Bio-oil has compared to fossil oil: lower heating value, low pH and also polymerizes with time. Because of this upgrading is desirable for increasing competitiveness.