This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The project was carried out together with OC Off Course who manufactureand distribute mainly electric bikes.In today?s society, alternative sources of transportation becomes more andmore present and several bicycle sharing programs arises in major citiesacross the world every year.Something that doesn?t exist too much as of yet is bike sharing programsthat uses electric bikes. An electric bike is a convenient way oftransportation as well as a good way of avoiding traffic. With an electricbike you avoid having to sweat when biking over hills or when you need totravel over longer distances.The goal of this project is to develop a bike sharing station according tothe functions need to be met.This thesis Is based on Fredy Olsson´s methods principkonstruktion aswell as a couple of concept generating methods from Kenneth Österlin.From this, a number of sketches were made that later was evaluated inseveral steps in conjunction to a set of specifications. A 3D model of theselected concept was later made in CatiaV5 for a complete product..

The purpose of this study is to investigate whether the new Swedish curriculum, GY11 brought with it changes to how non-religious world-views are presented in five different books in religious education, RE. The method used to analyze the material was a qualitative content analysis as well as counting the pages that dealt with secular world-views. This was later analyzed using philosopher Charles Taylors description and theory on secularization. This was used to identify secular processes as well as to define wether the books definition and description of secular world-views using Taylors concept of ?exclusive humanism?.The research questions are:? What are the authors writing about when describing the secular world- views?? What differences and similarities are there between the different editions prior and after the implementation of the new curriculum, GY11?? Are the secular world-views presented in a way that is compatible with Taylors concept of ?exclusive humanism??The results that are being presented are, first of all that the change between the different editions are not big.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Från kunskapens öar till den ömsesidiga insiktens fastland Ett pedagogiskt utvecklingsarbete för en personalutbildning med förankring i praktiken Anne Johansson Olsson Sammanfattning Denna uppsats redovisar ett utvecklingsarbete kring utformandet av en så kallad arbetsplatsanpassad utbildning. Arbetet bedrevs i samverkan mellan Transkulturellt Centrum (TC) i Stockholms Läns Landsting och Lina Hage samt Wasa vårdcentraler i Södertälje. Projektet syftade till att via inledande arbete, inventering av utbildningsbehov, utbildningsplanering, genomförande och utvärdering skapa en modell för en utbildning med fokus på vårdpersonalens möte med patienter som har erfarenhet av migration. Vårdcentralerna stod i början av 2007, i begrepp att inleda ett arbete med en delvis ny patientgrupp, asylsökande och nyanlända flyktingar samt anhöriginvandrare. Arbetet innebar ett förbättrat och utvidgat mottagande med erbjudande om hälsosamtal och till de asylsökande även en primärvård som motsvarade den övriga befolkningens.

People have used forest resources in northern Sweden for different purposes. Before the 20th century the forest was used for many different reasons, but during the past 200 years it has become an industrial raw material. The presence of people in the forest has left different kinds of traces in the forests. One example is culturally modified trees (CMT´s). The aim of this study was to study and document how people have used the forest resources during the last centuries in Brännlidens nature reserve, and what kind of traces this land use has left.

In my project, Cups on the run, I have studied the relationship between ceramic utility objects and different environments, when moving them off the table. My background as a potter has been the starting point. From there, I wanted to see if I could expand my craft to the space beyond. With the cup, which for most people has a clear function and a relation to us human, in repetitive structure I explored the spatiality and architecture in various environments. Life fascinates me through how everything is made up of tiny parts that together create the tangible and intangible.

A one-cylinder research engine has been used for studies with a Diesel Dual Fuel concept (DDF). DDF is a concept that utilizes a pilot diesel injection to ignite a homogenous natural gas/air mixture. Emissions and engine efficiency have been analyzed in an emission cycle called European Stationary Cycle (ESC) and the knock/pre-ignition problems with this type of engine have been investigated.At low and mid torque levels, an early diesel injection around 60 crank angles degrees (CAD) before top dead center (TDC) was used. At these loads raw NOxemissions was below EURO 6 level (0.2 g/kWh). NOxwas at EURO 5 level over the complete ESC without after treatment and with SCR at high loads it should be possible to reach EURO 6.One issue with DDF is the high HC emission levels.

Abstract This Concept Analysis according to Walker & Avant (1995) studies the concept of uncertainty in the nursing context. It consists of four parts where uncertainty in general have been encircled in a semantic analysis (part one) and a qualitative content analysis consisting of an questionnaire, distributed to the staff members at one nursing and medicine institution, with an open question about the meaning of uncertainty (part two). The third part is a literature study of the nursing context to find out how uncertainty is described (part three). Part four is the actual concept analysis based on the three first parts. Uncertainty in the nursing context is an individual conscious experience witch is changeable and impressionable. It is chained together with its antecendents and consequences.

This essay describes how theatre can be a tool in social work. The essay evaluates the Swed-ish KRAFT-project, a course for unemployed people with the goal to make them grow as in-dividuals by using drama exercises and performing a theatre play in front of an audience. The essay is a quantitative secondary study of the questionnaire used in the KRAFT-project. Through analysing the questionnaire the participants answered this essay tries to explain the results from a social psychological perspective. The essay also discusses how the participants? self-concept and self-esteem could have been affected by the KRAFT-project.

Sustainability work is something that is emphasized more and more. Corporate Social Responsibility, CSR, is discussed and the question of how much responsibility companies should really take is frequently in the news. Companies tend to ask themselves how much responsibility they should take. CSR is a common concept of companies environmental and social work and a concept we tend to see here and there in our modern society. CSR includes companies? social responsibilities, both in terms of carbon footprint, working conditions, social responsibility and more.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.