This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Methane (CH4) is a greenhouse gas (GHG) that contributes to the global warming. One of the largest sources of methane is livestock, preferably ruminants which alone counted for 30% of the total agricultural anthropogenic methane emissions in the year of 2000. The reason to why ruminants are such large contributors of methane are that the gas is produced in the rumen by enteric formation and leaves the animals by belching, exhaling or by the excreta.Diets high in concentrates can result in a lower emission of methane. Also diets with a high content of starch, such as alfalfa-grass, have a methane-decreasing. It is profitable to reduce enteric methane formation since that form of methane is unavoidably lost.

During one week (9-13 May, 2005) the use of veterinary diets for the hospitalised patients att the University clinic was registered. The animal owners were interviewed by telephone six months later about the feeding after coming home. Four out of ten animal owners answered yes to the question if the veterinarian had asked what food their animal normally consumed. Out of 35 animals, 15 (43%) were prescribed to a veterinary diet. Among cats it was 8 out of 14 (57%) and among dogs it was 7 out of 21 (33%). Four animals out of ten were recommended a veterinary diet when going home, but 20% did not follow the recommendation all the way through and stopped feeding their animal the veterinary diet. Reasons that were given was that the diet didn't last the entire period, that the animal didn't need the diet anymore according to the owner and one dog that became to lean when fed the diet. The diagnosis for these three dogs was vomiting, foreign body in the digestive system and bloody diarrhoea.

This study has been done in order to map the supply of vegetarian and vegan food products in Sweden for business clients and consumers. A total of 665 food stuffs were found and classified into six categories. The biggest category was meat substitutes with 302 products and the second largest category was sandwich spreads with 150 different products. Within the remaining categories a varied number of products were found; 86 beverages, 64 cooking accessories, 34 milk free ice creams and 29 plant based yogurts. Of the meat substitutes were 28 only available for business clients.

AbstractOutsourcing is a business strategy that has developed over the last 40 years. Outsourcing means to let another company do some activity within the company, for example production.The thesis for this paper is: How is outsourcing used in a manufacturing company today and how is the resource efficiency affected by it? The research is divided into two parts, a theoretical part and an empirical part. The theoretical part consists of a study of literature. The works in this study is books, text books, bachelor thesis paper and scientific articles.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

Higher demands of competitiveness and efficiency have led to increasing sizes of farms, with more land, more capital and more comprehensive logistics. The aim is to gain benefits of scale economies that reduce the production cost per unit. However, a greater extent of the business exposes the farm of increased risk where small deviations rapidly can erase the benefits. A modern dairy farm thus put high demands on the farmer?s ability to coordinate, plan and manage the forage production through the whole process until storage to obtain silage of the desired quality and quantity at the right price. The objective of this study was to design a simple model, i.e.

The aim of this thesis is to develop a new business model for district heating and cooling firms which can contribute to a stabilization of the Swedish national energy system. The business model is developed for a district heating and cooling firm and is exemplified with Fortum Heat. The theoretical investigation around the topic creates a rigid base for following qualitative empirical studies. Osterwalder?s canvas for business model generation is used together with a Casual Loop Diagram to identify a number of business opportunities which stabilizes the national energy system.

The aim of this report was to investigate if Sweden can have 100 % renewable electricity production in the year 2050. The conclusion is that it is possible but under certain conditions. For instance wave power must be in commercial use. When wind power and solar power represent a large percentage of the electric production there will be a lack of electric power during the winter but during the summer there will be a surplus of electric power. Both the surplus and the lack of electric power need to be taken into account.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Considering that the current technology is constantly improving, it becomes increasingly important to have an efficient logistics in a company to maintain profitability while achieving a competitive business. Efficient logistics may be accomplished by improving the internal materials handling. In this thesis the internal material handling of steel frames has been studied at a factory in Vaggeryd. The goal of this study is to investigate the problems that exist with the current production flow of products and provide suggestions on how it can be developed to reduce unnecessary handling and movement.The study has a deductive approach where the authors has been using literature studies parallel with empirical analyzes conducted at a company to achieve the purpose of the study. Documentation from the company and interviews with staff and observations form the basis for the data collection carried out.

The thesis work was conducted with the company Free2Move AB. The company is located in Halmstad and is an acting provider of wireless communications for industrial customers, mainly focused on Bluetooth? technology.In today's society most people have their music on their computer, MP3 player or mobile phone. What if you could avoid the cable between your sound system and sound source and transfer music wirelessly instead? Together with the company's engineers, I have developed a new comprehensive product for wireless music transmission.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

One of Sweden?s sixteen national environmental objectives strives to decrease the impact on the climate. By 2020, green house gas emissions should be 40 % less compared to the levels of 1990 and a minimum of 50 % of the energy consumption should come from renewable energy sources. Because of this there is a great need of increasing the production of renewable energy. This is where biogas comes in as a competitive alternative.

Since the turn of the millennium a sharp increase in the interest for bio energy has been observed. Important reasons for this growing interest can be due to the fact that fossil fuels are a finite resource. A net discharge of greenhouse gases occur when fossil fuels are burned. The discharge of greenhouse gases are considered to be the main reason to the greenhouse effect. Means of control to increase the use of bio energy has been introduced and, as intended, the use of bio energy has increased. As a result of the legal provisions the ability to pay for bio energy has increased, which the forest industry view as a problem.