Our examination project has been to develop today?s existing walking frames and make them more exiting and user friendly for tomorrow?s users.The use of a walking frame today makes it easier for a person with a movement difficulty in different extent. It makes it easier with their living condition and the user get a more movement easier life where they can take care of the daily chores without any help from the society or the family members.With our product we get a product that not only makes it easier for the user to get out and get forward. We help the user to get forward where they often would have difficulties to get forward. An example is where its more steeper parts where it could be more difficult to get up or down and even with more difficult foundation due to bad weather.

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This study is based on the development of a new software, which is used as a recommendationtool for selecting the best product. As part of the software development has an external partnerbeen asked to assist. The report will process the expectations that different people have on anew project but also how information is communicated to an external partner.The results from this study show that a software's function is closely linked to its usability.Therefore shall usability been taken into account when a new resource is created. The study alsoshows the importance of being able to share information, on how the program will beconstituted, to someone outside the organization..

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

Most of us sometimes in life visit a restaurant to relax and eat some good food. In that case, we trust that the food they are serving is of good quality and safe which prevent food poisoning. As a consumer you mostly do not have any insight what?s happening in the kitchen at the restaurant. What is really going on when they prepare the food? An introduction of the Smiley system could help you as a consumer in the choice of restaurant.

Obesity is a growing problem worldwide among children and adolescents. Previous research has shown that food habits and weight in order children with high and low risk of developing obesity (based on parental BMI) differs between the two groups. It has also been shown that the mother affects the child´s food habits and weight..

Our increasingly globalized world has contributed to that more Swedish companies has expanded their business to more distant areas. One of these Swedish companies that now stands before their first international expansion is the Swedish fast-food chain Max AB. Max has chosen to start their expansion in Saudi Arabia, a country far away from Sweden, not only in terms of geographical distance but also in cultural. The cultural differences that Max will encounter may affect the business and result in to various adaptations that must be done in order to establish successfully. The thesis investigates the existing circumstances for the fastfood business in Saudi Arabia and shows which adaptations international fast-food chains should or must do as a result of the cultural distances they encounter.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

Background: With the increased globalization food prices went down for a while, only to skyrocket to new levels. Prices of organic food, which already were more expensive than conventional, are now even more expensive. The current financial crisis results in reduced consumption which creates a threat to the smaller grocery stores. Globalization and the increased competition have had a negative impact on the environment but at the same time the desire to solve these issues has increased appreciably. The environmental aspect has been given higher priority by the individual, which led to a wider range of organic products and dramatically increased the number of stores selling organic products, leading to a greater competition among the stores selling organic food.  Problem definition: What factors are important for organic retail business long term survival?Purpose: Trough case studies analyze and evaluate the organic niche retail companies? strategies of marketing.Methods: This study is based on both qualitative and quantitative research methods.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This master thesis has been a product realization process. Having BRIO:s walking cart as thestaring point the purpose was to further develop the principle of such products and at the sametime broaden their sector of use. The final result is to be regarded as a complete solutionmeant as a foundation for further development at the BRIO Company. The product aims tosatisfy the demands and needs of the target group called theon the go parent. Trends, qualityand purchase power are features that characterize this particular target group.The project resulted in a walking stool namedBRIO Circus after its source of inspiration.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

Multi-brand portfolios are characterized by comprising many brands in the same product category. Companies that have chosen to organize their products according to this strategy are facing both possibilities, such as expanding the accessible market size, and challenges such as how to organize the brands, their individual roles and their relation and position to the other brands in the category to maximize revenues. To address these aspects of multi-brand portfolios, I have investigated four product categories where multiple brands are represented at Mölnlycke Health Care, Unilever, Fagerhult and L?Oréal; how the multi-brand portfolios are organized, how the segmentation, positioning and product differentiation are done and what advantages and disadvantages that are associated with this strategy. My conclusions are that multi-brand portfolios can be organized in many different ways and to become successful, they have to be set in relation to the company?s whole brand architecture.

The interest for organic food has grown a lot over the last 15 years. Even so, only 3.5 % ofthe share of wallet in Sweden goes to organic food. The purpose of this study is to examine and describe how retailers can get consumers to buy more organic fruits and vegetables. The study was carried out by visiting six Coop Konsum-stores, of which three performed poorly and three performed well in organic sales. We conducted interviews with the department managers, customer surveys and in-store observations.