In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.

Fertility is of central interest in the dairy production but has during the last decades declined. Increased milk yield has resulted in high pressure on the metabolism of the dairy cows that are supposed to manage the transition from dry cows to lactating cows within a few weeks around the parturition. Much indicate that metabolism and fertility are closely linked, with insulin playing a substantial part. There are many studies suggesting that the main part of gestation loss can be found during the early embryo development, a period which can be studied in vitro. The aim of this study was to test the effect of insulin during maturation in vitro and to evaluate two different fluorescent stainings on oocytes and embryos; a nuclear stain and a staining of apoptotic cells through the terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL)-method. Bovine cumulus-oocyte-complexes (n=991) were aspirated from abattoir-derived ovaries.

This report describes the scientific work of designing and manufacturing an intelligent controller module prototype for automobile trailer connections. The functions of the module are both to drive the lamps and detect failures. The module also contains functions to handle other functions of the trailer. To learn about controller modules the group does extensive feasibility study.The group receives three already existing modules, the functions of the three modules are studied and tested in the lab, this is done too get a overview of the construction. The method used I called reversed engineering, a way of constructing by analyzing constructions already done.When the modules are analyzed, the functions of the prototype are tested and designed without copying the analyzed modules.

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

The connection between fluorescence and color management still is a relatively unexplored area. Thefollowing composition analyses the theory that when printing on fluorescent ink jet paper using ICCprofilesa more yellow print will appear. In theory the ICC-profile compensate for blue light that fluorescefrom the paper with the complementary color, yellow. The human eye apprehands this fluorescentlight as white.When categorizing a number of ink jet qualities some tests to indicate change of color in the final printwere made. Five qualities were chosen for further analyses, each with different white point.

The aim of this master thesis was to examine a possible connection between chromatin functions and the DNA damage repair system, with the imprinted IGF2/H19 locus as a bait. Interactions can occur within and between chromosomes and it has been shown that H19 ICR on both alleles can communicate with alleles on other chromosomes. The methylation-sensitive insulator protein CTCF is bound on the maternal H19 ICR and acts as an insulator by blocking the IGF2 promoter to access its enhancers. This is possible by formation of loop structures by CTCF that enables intra and inter-chromosomal interactions. CTCF is poly(ADP-ribosyl)ated by PARP-1 when it is bound to H19 ICR.

Background: Chemotherapy and radiation resistance are major causes of failure in cancer treatment. The response to treatment in cancer cells depends on several mechanisms and pathways such as Janus kinases-signal transducers and activators of transcription JAK/STAT pathway. STAT1 was the first described transcription factor in the STAT family. STAT1 is activated by stimulation of signaling proteins such as type II interferon (IFN- ?) and the activated STAT1 translocates from cytoplasm to nucleus.

Cyanobacteria belong to the oldest organisms of our planet. They use photosynthesis to produce ATP and gain biomass from carbon dioxide. The cyanobacteria Nostoc punctiforme is a filamentous bacterium that consists of two different types of cells, vegetative cells and heterocysts. The type of cell it differentiates into depends on the media they grow in. In an ammonium-rich medium, the N.punctiforme consists of vegetative cells that differentiate into heterocysts when in the medium is changed to a low-concentration ammonium medium.

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

Badminton är en inomhussport som människor i alla åldrar och på alla nivåer kan utöva. Ju högre nivå sporten utövas på ju mer krav ställs på belysningen. I många badmintonhallar används idag armaturer som bidrar till bländning och som inte ger en god synkomfort. Badminton är världens snabbaste racketsport vilket gör att kraven på belysningen är hög. Utan tillräckliga riktlinjer gällande belysningsanläggningens utformning som ska säkerställa en god belysning för spelarna kan det bli svårt för dessa att hinna uppfatta fjäderbollen, då spelet går väldigt snabbt och mycket rörelser sker på badmintonplanen.Syftet är att öka förståelsen för vilka faktorer som är viktiga att ta hänsyn till vid planering av ny belysning i badmintonhallar.Metoderna som användes i studien var observationer, ljusmätningar, intervjuer och enkätundersökningar.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.