This bachelor thesis describes why investors should invest in environmentally certified buildings instead of non certified buildings. The report provides an overview of possible factors influencing an investor in the investment process of an environmentally certified building. The report explains why building companies find incentive to build green buildings and how a cash Flow method can be adapted so it can be used in the valuation process of an environmentally certified building. Environmentally certified buildings are used as a strategy to reduce emissions that threaten the environment as well as a strategy to obtain market shares for the building companies. This report focuses on the economic advantages of an environmentally certified building.The construction- and real estate industry stands for approximately 40 percent of the energy consumption in the world.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

Background: Businesses are traditionally valued with the so called Discounted Cash Flow-model. When valuing newly-started businesses, surrounded by high uncertainty, and whose capital mostly consists of unrealized business opportunities, the Discounted Cash Flow-model needs to be complemented if the total value of the business is to be captured. A valuation with the help of real options is capable of valuing these unrealized opportunities, which often exist in newly-started businesses. The unrealized opportunities are to be found in the business plan of the business, why this needs to be valued to capture the total value of a newly-started business. Purpose: To demonstrate what the use of real options can result in when valuing businesses.

For Skattkärr IF a turf field with warming has been projected to increase field?s utilization hours and to have a longer period for athletes to perform their activities outdoors. The technique chosen to heat the plan is a type of a geothermal heating system without a heat pump. The brine, which is water with 30% ethanol, collects heat from the borehole and discharges it to a coil in the field. There is at position 11 boreholes but it is planned to increase the number to 31, which is the design for the facility.

ABSTRACTSeminar date: 2008-06-04Subject: Bachelor thesis in Business AdministrationAuthors: Charlotta Lind Therese LundinBorn: 1982 Born: 1982Västerås VästeråsTutor: Ulla PetterssonTitle: Company valuation- A study in which valuation methods that areused in determining the value of producing companies and servicecompanies.Problem: According to the theory there are a number of different valuation methods which can be used to determine the value of producing companies and service companies. The thesis research problem is:- Which valuation methods does a valuator use in practice todetermine the value of producing companies and servicecompanies?- Does the valuator take different types of information andkey ratios in consideration when valuating producingcompanies and service companies?Purpose: The purpose is to examine and describe which valuation methods a valuator uses to valuate producing companies and servicecompanies in an acquisition.Method: In order to achieve the purpose of the thesis a quantitative survey and three qualitative interviews, made by email, has been carried out.Conclusion: The conclusion of the thesis is that discounted cash Flow and relative valuation are used to determine the value of producingcompanies and service companies. The valuators choice ofvaluation method is not generally affected by the nature of thecompany?s operations.Keywords: Company valuation, valuation methods, producing companies,service companies, relative valuation, discounted cash Flow.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.

By applying a segmentation procedure to two different sets of computed tomography scans, two geometrical models of the abdominal aorta, containing one inlet and two outlets have been constructed. One of these depicts a healthy blood vessel while the other displays one afflicted with a Abdominal Aortic Aneurysm. After inputting these geometries into the computational dynamics software FLUENT, six simulations of laminar, stationary Flow of a fluid that was assumed to be Newtonian were performed. The mass Flow rate across the model outlet boundaries was varied for the different simulations to produce a basis for a parameter analysis study. The segmentation data was also used as input data to a surface description procedure which produced not only the surface itself, but also the first and second directional derivatives in every one of its defining spatial data points.

Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested.  The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airFlow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.

WPF is a newly introduced graphical system that is a part of Microsoft?s .NET Framework. This report will evaluate WPF and its features. A comparison is made mainly towards the previous version of .NET which is .NET 2.0. The work is partly theoretical and partly implementational.

It is estimated that 22 000 contaminated areas exist in Sweden today. In order to classify the risk of contaminant migration from these areas and to prioritize which of these contaminated areas should first be treated, the Swedish Environmental Protection Agency (EPA) has designed a method, for the investigation of contaminated areas (MIFO). One of these contaminated areas is the landfill Gräsötippen outside Köping. The landfill has been used by both Yara AB and the Köping municipality between the years 1945 and 1975, and both industrial and household waste have been deposited there. The aim of this report is to survey which contaminants that can be found in the soil and water in the landfill Gräsötippen and to evaluate the migration of these contaminants.

Chemical substances are spread diffusely and uncontrollably as a result of the increased consumption of goods. REVAQ is a certification system that works to reduce the Flow of hazardous substances to Swedish treatment plants and to create a sustainable nutrient recycling. According to REVAQ, the yearly accumulating rate of metals should not exceed 0.2% in soil per year. Silver and bismuth are two metals that do not fulfill this requirement. The silver concentration in sludge decreased during the last decade, however the last few years, it has leveled off.

The technological legacy from the early electrification of the Swedish railroads has resulted in a power grid with a lower grid frequency than the national power grid from which it is fed. Energy transfer between these power grids with different frequencies requires substations, adapting the grid frequency for the rail road power grid. For this purpose, a feeding power grid has been built, stretching across the country from Boden in the north to Tälle/Häggvik in the south.Power transfer in the Swedish power grid results in voltage angle differences which increase with increasing loads and transfer distance. These voltage angle differences are transferred from the power feeding substations to the rail road power grid, will in some extent cause loss of energy due to unwanted power Flows from north to south.To minimize the losses due to this phenomenon, a power management system called EFS 132 kV has been developed and implemented. The system minimizes the unwanted power Flows and controls the desired power Flow for a good distribution of loads between the power feeding substations.This thesis investigates the extent of the transmission losses avoided due to the EFS 132 kV that coordinates the idling angles to a common reference point.The results indicate that EFS 132 kV affects the power Flow, especially between the northern substations through an improved load distribution.

This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced Flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced Flow were implemented within the two chosen work tasks.