Bachelor thesis ? ControllerEconomics, Linneaus UniversityTitle:From data to information ? a case study at Södra Cell Mönsterås Authors:Sofie Gotting, Renée Lundberg and Emma Molin Tutor: Anders Jerreling Examiner: Fredrik Karlsson In Sweden, the process industries employs nearly 600 000 people and it accounts for about 60 percent of the country's net export. In many industries today, there is a growing emphasis on calculations. They are used to manage and control the activities in today?s organizations, one of these industries is the process industry.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

Bakgrund: Om VaR kan estimeras väl med hjälp av ES-metodik, kan man få bukt med VaR-måttets brist på sudadditivitet (vilken innebär dels praktiska problem vid utformning av finansiella organisationers limitstrukturer, dels teoretiska problem i enlighet med Artzner et al (1997, 1999)) samtidigt som man uppfyller det formella kravet på att rapportera sitt VaR på 99 %:snivån. Syfte: Att undersöka hur väl ES ? estimerat på olika konfidensnivåer och med olika metoder ? duger till att skatta en banks 99 %:s-VaR. Metod: Två ES-metoders och sex VaR-metoders förmåga ? både avseende frekvens (Kupiec-test) och oberoende (eget längsta-följd-test) ? att skatta 99 %:s-VaR utvärderas och jämförs.

This thesis is conducted together with the environmental- and health department in Halmstadcommunity. The thesis is about allowance of bedding and water supply for pig farms inHalmstad community. These farms are chosen randomly from all of the pig farms inHalmstad community. It includes inspection of 27 pig farms and writing of a report. Duringthe inspections I study the amount of bedding, what kind of bedding, water supply andinjuries like lameness, shoulder-bone sore, ear-, flank- and pig tail biting.

Heat, clock scew and frequency optimization are some of the problems a semiconductor designer must face. By splitting a synchrounous block into multiple pieces which comunicates asynchronously with eachother and provide them with independent clocks, these problems may be reduced. GALS (Global Asynchronous Local Synchronous) is a wrapper that wraps a synchronous block and provides it with a clock. Multiple GALS-elements will make the whole system. The clockfrequency may be independently adjusted between each block.

Biogas is a renewable energy source that is produced by anaerobic digestion of organic mate-rial. In Sweden, biogas predominately comes from sewage water sludge and landfills or from organic waste of households and industries. Small scale digestion plants at farms are espe-cially expected to contribute to increased biogas production in the future. Biogas can be ob-tained directly in it?s raw form and used as fuel in a combustion chamber.

Purpose:The background to this study is an upcoming sale of a property. Owner of the property is currently city of Gävle and tenant is Jan Ekroth who runs the hostel Gamla Gefle in the buildings belonging to the property. The purpose of this study is to investigate whether Gamla Gefle AB has the financial ability to acquire the property and if it can be defended in a commercial plane.Method:In this study a qualitative method has been used, in which empirical data has been gathered from interviews and financial data taken from annual reports. These empirical data have been put against our theoretical framework and led to our analysis. In the analysis, cash flows and discounted future values have been calculated to determine the outcome of the investment.Results & conclusion:The study reaches the conclusion that the hostel Gamla Gefle should complete its acquisition of the property, in spite of an decrease of the annual cash flow.

This master thesis was conducted at Motala Wire Works Ltd (MWW) in Motala during the autumn and winter of 2007-2008. The thesis named ?Future layout of Motala Wire Works? focuses on making a better planed layout for the factory, which also take in to consideration future changes.Motala Wire Work produces wire mesh products of varying sorts for the white goods industry. The factory was started by Electrolux during the 1950?s.

Syftet med vår undersökning var att undersöka om extrem-/äventyrssport hade en plats i kursen idrott och hälsa A. Vi valde att skicka ut förfrågningar till 20 skolor i Malmö och grannkommunerna, av dessa fick vi svar från tio och endast fyra ville delta i undersökningen. Detta gjorde att vår undersökning omfattar fyra intervjuer med utbildade idrottslärare på fyra olika gymnasieskolor i sydvästra Skåne. I vårt resultat kom vi fram till att tre av lärarna hade extrem-/äventyrssport vid ca fem lektionstillfällen per termin, och en hade inga lektioner alls med denna typ av aktivitet. Det var många faktorer som spelade in när lärarna beskrev varför de inte hade så många lektionstillfällen med anknytning till extrem-/äventyrssport bland annat tid, resurser, skaderisk, engagemang och förutsättningar i närmiljön. Alla lärare vi intervjuade hade en positiv inställning till extrem-/äventyrssport i skolundervisningen och skulle gärna vilja få in fler lektioner med denna form av aktivitet, eftersom det hjälper att stärka elevers självkänsla, ger en allsidig träning och är ett bra verktyg för teambildning. Tre av dem såg det som väldigt viktigt att idrottsundervisningen i skolan följde med i utvecklingen, anammade de nya aktiviteter som ungdomar sysslar med utanför skolan och att extrem-/äventyrssport hade blivit ett stort fenomen i samhället.

Concrete is one of the world?s most common construction materials and is composed of 70-80 % stone material. Today crushed stone is used as aggregate in concrete in order to replace natural aggregates due to strong environmental reasons. Stone crushing yields flaky material and in this thesis studies are made on the flaky particle shape and how it influence properties of concrete such as workability, rheology and strength. The concrete recipes used in this thesis have fixed values, the only variable is the flakiness of the crushed stone.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

This report evaluates whether normal approximation or resampling is to prefer for estimating the distribution of the sample mean and functions of the sample mean. The evaluation relies on simulation studies. The observations of the sample are allowed to be differently distributed. In the case of sample means they are also allowed to be dependent.For sample means the two approximations behaves very similar. The most important component whether we have a good or a bad approximation is how good the approximations catch the variance of the true distribution.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

This thesis is made on behalf of SCA's Forestry Division and is a comparison of two bucking simulation tools: Aptan (manufactured by Skogforsk) and Best/upr (from Berget Systemdesign). The data is based on 32 stands from SCA's forests in Norrbotten and Västerbotten. The objective is to compare the simulations created by the tools with the harvested volumes from those stands. Three variables are needed for the bucking simulation; these are the diameter distribution (at breast height), the relationship function between diameter and height, and the taper coefficients. The volumes of five different assortments from the stands are compared.