The purpose of this thesis is to examine the usability of the Umeå University library catalogue Album. The aim is to evaluate the catalogue in order to establish if there are any problems that could be solved by modifying the catalogue. The following questions are answered: How should a good catalogue be designed? Which problems are common when using a library catalogue? Is Album user friendly? Are there any problems that occur when using Album and how can the catalogue be changed to avoid the problems? To answer these questions I have performed a usability test in which five persons, all students, got to carry out twenty tasks in the catalogue and talk about what they were doing and thinking while doing the test. This method is a usability method called Think Aloud.

Syftet med denna studie var att undersöka unga idrottares upplevelser i en topprestation.Studiens frågeställningar var:·        Vilka upplevelser har unga idrottare i en topprestation?·        Upplever unga idrottare flow i en topprestation?·        Vilka faktorer ligger bakom en topprestation hos unga idrottare? Utifrån syfte och frågeställningar valdes mätinstrumentet Flow State Scale-2 (FSS-2). FSS-2 består av ett påståendeformulär som mäter den totala upplevelsen av flow samt var och en av de nio dimensionerna av flow.Kontakt togs via telefon och mail med ansvariga tränare vid idrottsgymnasier för att finna unga idrottare med ett tydligt minne av en topprestation. Undersökningsgruppen blev 51 stycken unga idrottare, män och kvinnor i åldrarna16-20 år som utövat fotboll, ishockey eller orientering på elitnivå.Litteratursökning gjordes i bibliotekskatalogen tillhörande Umeå Universitet. Den funna relevanta litteraturen och artiklarna har legat till grund för denna studies bakgrundsdel. Påståendeformuläret FSS-2 visar att undersökningspersonerna, i sin topprestation, hade en stark upplevelse av inre tillfredsställelse, tydliga mål, koncentration på uppgiften, känsla av kontroll och balans mellan skicklighet och utmaning.

Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.

In the digitized world many organizations experience a large flow of information. To sort and manage all the information can be difficult. Individuals may experience a phenomenon called ?Information Overload?, due to the fact that the information flow is too extensive. There are various reasons why individuals are affected by this phenomenon.

This essay is a case study carried out at Flow Systems Ltd that foremost aims to treat the internal marketing at the company. The aim with the essay is to analyze and evaluate Flows internal marketing in connection with a process of change and how this reflects the external marketing in relation to customers.The method that has been used is qualitative in the form of depth interviews carried out with management, employees and customers. This type of data was chosen since it is a good way of gathering more specific information regarding the informants preferences about the company. Among other things the results of the interviews showed internal marketing deficiencies, but that has not influenced the customers in a negative way. The conclusion was that the inferior internal marketing does not affect the cooperation and the communication between the company and its customers, however it has a big effect on the employees..

Concrete is a very common construction material. It´s characteristics are strength, durability and formablility. Superplasticizer is a common admixture, which changes the properties of concrete. Today (spring 2007) there are no certian mathematical methods to calculate the required percentage of this admixture needed to give the necessary set slump flow in the overall concrete recipe. Concrete batching companies must therefor experiment with different amount of superplasticizer in order to meet the specified slump and strength. The purpose og this report is to investigate if any mathematical relation can be established between the amount of superplasticizer used and the slump flow achieved. After carrying out some practical experiments using four different superplasticizers a direct relationship can be establish between the percentage of admixture used and the slump/flowability achieved. Unfortunatly at present due to the numerous variables, the calculation of mathematical formula can not be achieved..

Treatment wetlands been showed efficient for reducing pollutant in waste water. In Lajeado ? RS, Brazil the landfill has poor leachate water treatment. It is necessary to supplement the treatment plant because they need to reduce BOD, COD and nitrate of the water going to recipient. A subsurface flow wetland (SSF) can be a good choice.  In order to be able to design an efficient SSF it is important to understand how the grain sizes of a substrate affect the reducing of pollutants in waste water.

We have left the industrial society, and instead, we live in a post-industrial knowledge and information society. It is often said that industrial production has disappeared or that it has changed greatly. This means that fewer are employed in the manufacturing sector while the service sector is increasing, resulting in that the boundaries between production and administration decreases. The production goes from mass production to more flexible and specialized solutions. This puts greater demands on the logistics chain that continually need to work to meet customer requirements.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

The construction industry has not undergone the same logistical development as the manufacturing industry; this, in combination with increased material price, leads to the fact that the construction industry must be improved. This master thesis is a part of the research cooperation Brains & Bricks goal of reducing production costs for the construction sector by 25 percent. Brains & Bricks is a cooperation between Linköping University, Peab and Katrineholms municipality. The master thesis aims to identify improvements in the flow of material, the Supply chain operation reference, SCOR, model has been used and the work has been carried out on one of Peab?s construction sites. At present the business is characterized by bad communication both between the construction site and the office as well as between the construction site and suppliers.

Since 2004, wind power has had the largest installation of new capacity compared to other energy sources in Sweden. Accommodating new wind power may require strengthening or rebuilding of the existing grid in areas where the grid is already loaded to maximum capacity. This master thesis examine the possibility of a new 400/130 kV substation in Yttermalung, Sweden, with a connection to the two neighboring regional grids in Dalarna and Värmland owned by Fortum. This substation would provide a new connection point to the Swedish transmission system as well as an interconnection of the two, currently separated, regional grids. Different expansion scenarios where a substation with and without series compensation or a phase shifting transformer (PST) to control active power flow were studied.

The purpose of this Masters thesis is to make a critical analysis of Journal Impact Factor JIF. JIF is today the most widespread quantitative measure for evaluating scientific journals. Although it is internationally used and is considered authoritarian many problems have been observed. This has led to that the validity of JIF has been questioned. To identify JIFs limitations the following issues have been raised: Which are the problems with citation analysis? What criticisms have been directed towards Journal Impact Factor as a measure for evaluating scientific journals? The theoretical framework consists of theories about citation behaviour and a discussion about the characteristics of a scientific journal.

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..