In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

The information flow is a very important process in an organization. It affects in a decisive manner the effectiveness of a task. It also has a major impact on the quality of the product or service for which the organization delivers to its customers. Lack of information may cause that important aspects are not given the required attention or even forgotten and can in turn lead to criticism from certification officials and lower customer satisfaction. The purpose of this study was to study how the information flow in Norrskog?s field organization is handled and how this affected the quality of the work performed and the feedback given to the contractors, The study is based on qualitative interviews with contractors, production inspectors and forest inspectors on all Norrskogs districts.

Vomb meadows is an area well knows for its rich bird life. During the 19:thcentury until mid 20:th century, the meadows were flooded annually in order toincrease the hay yield. The river Klingavälsån situated along the west side of themeadows, used to be a shallow river, meandering across the landscape. In the1940?s the river was straightened and made deeper.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

Detta arbete exponerar den problematik som existerar för spelutvecklare med avseende på att både erfarna och nya spelare ska tillgodoses i vidareutvecklingen av spelkoncept. I anknytning till detta diskuteras flow-teorin som kan sammanfattas som den optimala upplevelsen där balansen mellan utmaning och skicklighet är perfekt. Teorin ligger till grund för analysen och varför designfilosofin ?intern expansion? undersöks som en eventuell lösning på problemet. Det som undersöks är designfilosofins potential att generera en likvärdig upplevelse för både erfarna och nya spelare.

The aim of this Masters thesis is to investigate the factors that contribute to childrens feelings of enjoyment and wellbeing while reading pleasure reading. The research is founded on qualitative interviews with eight children aged between 9 and 12 years. In the review of the literature different theories of reading experiences are examined and the theory of flow is used to analyse and interpret childrens statements of reading experiences. The theory of flow has not been developed to investigate reading but aims to describe and explain when and how people experience happiness and joy. The results of this study reveal that many different factors influence childrens reading.

The main project Dry preservation of source-separated organic household wastes involves a new technique for treatment of biowaste through drying. Investigations are going on to determine how the dried biowaste best can be used to close the natural circular flow of nutrients. The objective of this degree project is to determine if the dried biowaste can be used as a soil conditioner. By restoring the nutrients in the material to the ground, the natural circular flow is closed. A declaration of contents, including the nutrient levels, C/N ratio, pH and the electrical conductivity of the dried biowaste, was constructed and a germination test was done to make sure that the material did not inhibit sprouting.

Detta projekt har producerats i samarbete med Abu Garcia i Svängsta, Blekinge. Vårat projekt är en interaktiv produkt presentation gjord i flash med inslag av 3d, video och ljud. Våran tanke är att användaren ska kunna se hur en Ambassadeur Record fiskerulle ser ut både på insidan och utsidan, hur den fungerar och vad som gör den så unik. Det finns också video filmer som beskriver tillverknings processen, och hur man som förstagångs användare använder en Ambassadeur rulle. Design och bakgrundsljud är anpassad så att den ska väcka en känsla av fiske och fridfull utomhus miljö..

Saab Training Systems (STS) in Huskvarna is manufacturing material for educationalpurposes to armies worldwide. They are now implementing parts of the Lean productionconcept in their organisation.One part of the work with Lean production is to eliminate waste. To be able to identify waste,value stream mapping is a good tool and also what we used in our thesis. To gain a betterefficiency in the production of Personnel Detector Device (PDD) flow was one of our goals.The PDD is a harness used during battle training which registers if the user is being hit by itsenemy.Our work with the thesis started up with a short education in Lean production and in valuestream mapping (VSM). The work proceeded with a VSM of the production flow of the PDD,interviews were made and studies of literature were done to gain greater knowledge of thesubject and solve the task.The VSM resulted in five areas which were followed up out of those six we identified.

The aim of this study is to gain knowledge about the internalcommunication at a public library in Sweden, focusing on the flow of information and the library employee?s role as a source and receiver. This is an important subject because internal communication affects not only the internal work, but also the users. Despite this there are few studies about internal communication in libraries. The research questions used are: How do the employees perceive the role as source of information, and what choices do they make before they spread information? How do the employees perceive the role as receiver of information? How do the employees feel that the information flow works in the organization as a whole?The research is founded on five qualitative semi-structured interviews with the library employees.

Emhart Glass is the world?s leading manufacturer of equipment, controls and components to the glass container industry. The goal of this project has been to identify improvements and propose cost saving solutions when moving one of Emhart Glass work cells in Sundsvall. The changes shall result in improved work environment and increased product quality. The method contains value stream mapping, concept selection and P-FMEA and complies with Emhart Glass goal to become a more Lean focused business.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

Title: The appraiser?s choice of valuation method ? factors that influences the choice of company valuation methodsSeminar date: 04/06/07Course: Master thesis in Business Administration, 10 Swedish credits.Authors: Anne Benedicks and Veronica ÖbergAdvisor: Eron OxingProfession of category: Financial analysts, auditors and company lawyers.Key words: Company valuation, valuation methods, cash flow analysis, comparative valuation, the net asset value method.The Main Issue: What is of decisive importance when choosing a special company valuation method?Purpose: The purpose of this paper is to identify, analyse and evaluate the most common methods of valuation for financial analysts, auditors and company lawyers and those factors that influences the choice of method.Method: A multiple survey has been implemented for the actual profession categories. Primary data was collected through semi-structured interviews and a questionnaire survey.Theoretical: The theoretical frame of reference is based upon the paper?s dependent variable, i.e. the role of the appraiser.

Vinderosion på jordbruksmark har länge varit ett välkänt faktum trots att någon utförligare undersökning om dess omfattning och skadeverkan inte tidigare genomförts. Mot bakgrund av detta har därför ett nordeuropeiskt projekt, WEELS (Wind Erosion on European Light Soils), dragits i gång som syftar till kartlägga vinderosionen på sandig jordbruksmark i norra Europa och som man i slutändan hoppas ska kunna resultera i en vinderosionsmodell. Detta har genomförts med SOIL modellen, en matematiskt fysikaliskt baserad modell för simulering av vatten och värmeflöde i en skiktad jordmånsprofil..