SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Efficiency has become an important objective for many providers of welfare services. Among Swedish schools, both private and public, increased administrative demands seemingly influence operations, and affect teachers negatively through perceived stress. Simultaneously, Swedish students scored an all-time low in the latest PISA survey, and are now performing below the OECD-average in science, mathematics and reading. A central administrative task in the Swedish elementary school is the parent-teacher conference, which is an important activity in supporting the development of the student's knowledge and social skills. Lean is a well-established operations framework, which has proven successful in order to improve process efficiency.

Our report procedure identification of instability and disturbance in an automatic manufacturing line of processing and assembling of chair sliding rails at Sapas manufacturing department in Vetlanda.To obtain a stabile ground we have mapped the material flow to receive a comprehensive view and to visualise connections.We have examined cycle times at different stations in purpose to identificate bottlenecks. The result of our examination showed that the bottleneck of the line was the brush station. This leads to that the expected bottlenecks identificated by Sapa gets a delay time and by that a longer cycle time.Interruptions has a clear negative influence at the line performance so we have also assemble data through the operators report list and compiled these in order to find out the interruptions effect on the line. The outcome during our assembled period was that the reported interruptions corresponded about 30 percent of the total available production time. This has a clear negative effect on the line productivity and efficiency as we have calculated in order to get the present status..

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

The aim of this Master?s thesis is to investigate the meaning the reading group of the public library has to a number of users. To fulfill the aim the following three questions have been formulated: 1) What do a number of users expect from the reading group of the public library? 2) Which approach/attitude or approaches/attitudes do a number of users have to reading and to talking about reading? 3) How do a number of users experience the ongoing reading group?The research is founded on qualitative interviews with five users that take part in three different reading groups in public libraries. The theories that are used is the theory of three so called strategies - the pragmatic, the traditionalistic, the emancipatory ? and the theory of flow.

The purpose of this research was to examine the current field of management in non-profit organizations, mainly focusing on managerial approaches, but also the impact of organizational size on the shaping of governance. Non-profits are widely discussed in contemporary research, particularly due to the increasing external pressure on voluntary organization to professionalize the way they work in line with standards in the private sector. Due to this our thesis aims to investigate whether professional, bureaucratic approaches are useful when governing a non-profit organization, or if social structures are enough to ensure goal congruence and efficiency. To conduct this research qualitative interviews were carried out and a case- study was made, using the Swedish Karate Federation as object of study. Results show that formal and more professional structures are useable to achieve efficiency and prevent inertia within the organization.

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

In this project a LC-MS-method for the analysis of gamma-hydroxybutyrate, gamma-butyrolactone, 1,4-butanediol, amphetamine and methadone was developed.Initially, the efficiency of the ionisation of the analytes was evaluated with respect to the ionisation technique (ESI, APCI and APPI) and the composition of the mobile phase. In the next step a number of different columns was tested in order to find the one with the greatest potential for separation of the substances in question. Using the selected column, the separation was optimised by means of experimental design and the software The Unscrambler 7.8. The parameters studied were the flow rate, the column temperature and the mobile phase composition. The response variables were the resolution between the target compounds and the retention time of the last eluting compound.These experiments showed that, in order to obtain the best ionisation, the mobile phase should consist of 5 mM formic acid in water and acetonitrile.

Severe floods caused by heavy autumn rains in year 2000 raised the question whether measures to reduce the damage from high water levels, in the area surrounding lake Glafsfjorden and along the river Byälven down to lake Vänern, are possible. One option is to reduce flow resistance along the river and thereby lower the maximum water level a given inflow would cause. Good knowledge of hydraulic and hydrological conditions is necessary in order to estimate the effect of such flow-reducing measures. In order to quantify such effect a 1-dimensional hydraulic flow model has been set up for the river Byälven using the software package MIKE 11. The model is more detailed, especially concerning topography and bathymetry, than earlier models used for studies of the river.

With the globalization, companies in the West chose to shift production to developing countries to cut down costs. This had a major impact when child labor and very poor working conditions in these factories were discovered and led many companies to take responsibility for their suppliers and the employees by adopting voluntary so-called Codes of Conduct.There is a subtle balance to enforce improvement of working conditions for employees at suppliers´ factories and to keep costs down. On the one hand, companies would like to conduct extensive audits at their suppliers to ensure code of conduct compliance and thus protect their legitimacy. On the other hand, audits are expensive so companies would like to minimize audits to keep costs down. Companies thus have to strike a delicate balance in relation to how many and what suppliers they choose to audit.

In Halland, agriculture is the major source of eutrophication of water. In the study, synoptic sampling were performed in the three watercourses Nyrebäcken, Skintan and Vinån all located in the county of Halland. Sampling occurred during the period February to May on three occasions with different flow rates: high, low and base flow. Samples were taken in the mainstream and tributaries with intention to show how big the impact of eutrophication it is in the water and  to assess the impact of the tributariesThe results show that all watercourses are affected by eutrophication. Nyrebäcken has the highest concentrations of nitrogen and phosphorus in the mainstream, then Skintan and last Vinån.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

AbstractThe development of the construction industry is slower compared to other industries. This implies that there must be improvements in this field. One step to increased effectiveness in construction projects is making the construction process more efficient, therefore resulting in a positive result for both the actual construction project and for the overall branch. The purpose of this study is to identify areas for improvement within the municipal housing company Gavlegårdarna completed construction project, who will then contribute to increased efficiency in their upcoming projects. The work has been performed with the help of two case studies examine construction projects "Fullriggaren" and "The three nursing homes." Opinions about what could have improved the efficiency of these construction projects further have been collected with the help of an interview study among some of the project participants involved in both projects.There have been many studies addressing the topic of how the construction process can be streamlined and similar studies that have been previously conducted.

The purpose of this paper is to examine how the traditional airlines' strategies are affected by the low-cost carriers emergence and their business model and in wich ways they can achieve profitability. Furthermore we also want to examine the factors that affect the airlines' efficiency and competitiveness.The results of this study shows that the growth of the low-cost carriers have affected the network airlines' strategies as they, among other things, had to also lower their fares. This has forced them to revise their cost and efficiency in their entire operation. The result has also shown that the network companies can not come down to the same level of low costs as the low-cost carriers, and must therefore examine their ability to increase revenues instead. .

 Saab Microwave Systems (SMW) is a business unit within Saab AB that manufactures and develops different types of radar- and sensor systems for naval, airborne and ground based forces as well as within the market for civil security. In addition to the manufacturing of radar and sensor systems they also provide different types of service concepts. The business unit has 50 years of experience within the area of developing radar systems and is considered to be one of the market leaders. When applying an assemble-to-order production strategy with products at this level of cost price the product lead-time is vital and becomes an important part of the strategy within marketing and sales. Within SMW there is a new department called Supply Management (SM) that provides the supply of incoming and outgoing material. Within SM there are four sub-departments working with activities such as planning, purchasing, receiving inspection, storage and distribution.