This thesis has been performed at Uddeholms AB with the purpose to investigate theparameters affecting the formation of inclusions during the manufacturing of a low carbonmanganese-steel.A follow-up, steel and slag sampling and evaluations in microscope have been done for a totalof five heats.The results for each heat have been evaluated in relation to the theory from the literaturesurvey and suggestions for changes in the process to reduce the amount of inclusions whichhave a negative effect on the steel quality have been given.The project extends over a large process where many parameters affect the formation ofinclusions. However, a tendency that a higher addition of alloys seems to increase the totalamount of inclusions before and after the vacuum degassing is seen.The majority of the studied inclusions seem to approach the composition of the top slag aftervacuum degassing. Ladle glaze may cause the inclusions which had a different compositioncompared to that of the slag.A high or low ladleage together with a high argon flow during vacuum degassing seems todissolve particles from the refractory which later on get trapped inside the inclusions.The floatation for two heats has been studied where a short floatation seems to give a higheramount of inclusions in casted material.In machined material so called stringers were found. The main composition of those stringerswas pure alumina. Inclusions with a composition of pure alumina were not found in the liquidsteel, thus the pure alumina inclusions must be formed during the casting.

Flowcytometric technology has been widely used for measurement of the absolute numbers of T-lymphocytes subsets in Human Immunodeficiency virus (HIV), defining the disease state, monitoring antiviral treatment, and identifying any risk for opportunistic infections. A manual preparing of the samples is required. More recently an automated and enclosed blood cell counting, Celldyn Sapphire has been introduced. In this study the performance of the Flow cytometer EPICS XL as a reference method for analysis of CD3+, CD4+ and CD8 T-lymphocytes was evaluated with blood from 40 individual?s samples.

Biogas is a gaseous fuel, rich in methane, produced through a biological route in an anaerobic digester. A gas engine generates combined heat and power, which can be used at the farm to reduce energy cost. The process also generates a digestate, with better utilization of nutrient compared to cattle manure. The aim of this study is to analyze the profitability of a farm-scale biogas plant for combined heat and power (CHP) at Wapnö. Wapnö is an agriculture company located in the southern part of Sweden.

A Biogas plant in SLU?s (Swedish University of Agricultural Sciences) management sustains to behave in con-nection with the new animal stables at Lövsta. There will primarily manure from stables that rot to biogas. The biogas plant will also have the capacity that rot others substrates that can arise in the farm operation. The aim with the biogas plant is to produce non fossil electrical and gas heat for own customs, to reduce smell impact from stables and to make possible different types of research investments within the area.This study has implemented multiple cases study of different investment scenarios.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.

Today produces the wind power 2,5 TWh (TWh = terawatt hours) of Sweden?s total energy input of around 620 TWh. The Parliament has adopted a national planning objective where the wind-based electricity production will increase to 30 TWh in 2020. This requires that landowners will leas there land for wind power to wind energy companies. Such land leasing means that the landowner's business is considered to be a multiple-use.

It is found that the properties of the record years of 1965-1975 is leaking a lot of energy andthese properties are facing a major energy efficiency. From the energy aspect, the facade isafflicted with poor thermal insulation which is a big problem. To address this problem addinginsulation is a good alternative to reduce overall energy consumption of a building. Thewindows on these buildings are also a problem from the energy point of view. Therefore,there are many reasons considered for energy upgrading.

The aetiology of osteochondrosis (OC) is known to be complex and multifactorial. The occurrence of bone fragments in joints and their connection to osteochondral disease are no exception. In the hock and stifle joint of the horse this type of lesion has generally been considered to be of osteochondral origin, while the process behind these fragments in the fetlock joint has been up for discussion. The objective of this study was to determine the frequency and the localisation of OC in Swedish warmblooded horses. In order to do so all radiographs of stifle, hock and fetlock joints performed on Swedish warmblooded horses during the period of 1992-1999 at Regiondjursjukhuset in Helsingborg were examined and the material was divided into two groups.

SUMMARYPrevious research has shown that there is a connection between the doorways and postoperative wound infections. Despite recommendations from Socialstyrelsen and the individual hospitals' PM there is still high traffic in the operating theatres. In a hybrid theatre environment combined X-ray techniques of surgery, resulting in it being further two categories inside the operating theatre. This may generate an increase in traffic flow. The study is a prospective, non-participant observation study conducted in the spring of 2013 at a university hospital in western Sweden.

This Master?s thesis concerns the information behaviour of pastors in nonconformist churches (especially new evangelical and Baptist church communions) in Sweden in their spiritual service to the local parish. The thesis also looks into how the information flow functions in the pastors? context and why the information need appears as it does. The theory used in this study is contextual analysis based on Buckland?s, Weber?s and Patrick Wilson?s theories on authority and power structures.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

As a result of a successful human development around the world an extensive urbanization of societies are taking place that are networked in various ways. In these networks, increased travel and digitization are central where individuals and organizations converge in a constant and immediate wireless and mobile technology flow. An example of this is Stockholm and its public transportation company Storstockholms Lokaltrafik (SL). Although most participate in most of the network society, SL is struggling with an audience that seldom travel with them: families with children. We intended to find out how the communication of SL´s digital platforms could get families to travel more with public transportation.

ITT Flygt is a world leading company that mainly manufactures submersible pumps. A problem of ITT Flygt is that product development projects rarely manage to hold the estimated project time. It shows that something unexpected occurs in projects quite often, which results in delays. The delays can both be due to an optimistic time plan of projects and risks in product development projects which are not discovered at an early stage. This added with unforeseen delays makes it difficult for ITT Flygt to estimate the duration of their projects.The goal with the Master thesis is to examine a suitable method for simulation of project time.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.

Fleets have the ability to affect an adversary?s use of the seas for transportation. Nations have in numerous occasions exercised this power in order to ravage their opponent?s trade in times of conflict with the purpose of diminishing their military might. Great naval thinkers like Mahan and Corbett have described this use of seapower during conflicts in great depth but theories regarding the use of seapower to affect a nation?s peacetime economy in order to achieve limited political goals is lacking.