Syftet med detta arbete är att simulera ett värmesystem i COMSOL Multiphysics, Pipe Flow Module, Non-Isothermal Pipe Flow som innehåller ekvationer och randvillkor för att modellera inkompressibel strömning och värmeöverföring i rör.Data om processen och dess komponenter har samlats in från industrin där arbetet är utfört och i vissa fall modifierats för att bättre beskrivas i programmet.Utifrån insamlad data har en modell byggts upp och två simuleringar har gjorts. En stationär för starten av systemet, den har sedan legat till grund för en dynamisk som simulerar förloppet från start till normaldrift.Tiden det tar för det aktuella fallet att nå drifttemperatur är 16 timmar. En felströmning upptäcktes samt att en av pumparna inte kommer att klara en start från 20 °C..

Background: Today there are high claims on organizations to show a positive economic view. To satisfy the demands and expectations from interested parties it is very important to carefully plan the companies tied up capital and cash flows. Purpose: The purpose with the thesis is to describe what actions organizations take to resolve the conflict between showing a positive cash flow and the need to tie up capital.The purpose is also to explain the different factors that must be considered when making decisions regarding cash flow and capital tied up. Method: A qualitative study of the actions and factors wich must be considered when decisions in swedish construction companies are made regarding cash flow and capital tied up. Results: A model of the factors and actions that affect cash flow and capital tied up in projects.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

A district heating plant has the advantage that it can take advantage of the waste heat from industries and use of cheap fuels to produce heat. But for the long term is competitive requires that energy is also saved in district heating plants. One way to save energy in a district heating system is to increasing cooling to the return temperature. This leads to less power needed to drive the distribution pumps,  and that more energy could be extracted from the same amount of fuel by an improved flue gas condensation.In Karlskoga the return temperature into the district heating plant is high. They would therefore reduce the return temperature in order to extract more energy from the flue gases.

Hur kan svårighetsprogression användas i skapandet av Puzzlehunts med syfte att uppnå en ökad upplevd känsla av flow hos spelaren? Denna frågeställning behandlas i uppsatsen och problemet som måste lösas är hur man kan bygga upp en ackumulerad kunskap om något vars syfte är att hela tiden tvinga dig att hitta nya lösningar på problem. I mer traditionella spel kan upprepning lära spelaren hur spelmekaniken fungerar. I puzzlehunts kan upprepning av spelmekanik inte användas eftersom målet för varje pussel är att hitta mekaniken som löser problemet. Uppsatsen visar att man genom inlärning av hur man skall tänka för att hitta lösningarna till pusslen kan bygga upp en ackumulerad kunskap hos spelaren och därmed även ha en svårighetsprogression och öka upplevd nivå av flow hos spelaren..

Tidigare studier har visat att faktorerna KASAM, flow samt prestationsbehov har betydelse för hög upplevd arbetstillfredsställelse. I denna studie undersöks om dessa faktorer även är aktuella under svenska förhållanden. En enkätundersökning genomfördes på 137 anställda på tre olika företag för att mäta om de tre faktorerna kan predicera arbetstillfredsställelse. Resultatet visade att KASAM, och särskilt komponenten meningsfullhet, var en stark prediktor av arbets-tillfredsställelse. Även flow, och särskilt dimensionen inomboende arbetsmotivation, hade ett signifikant prediktionsvärde medan det visade sig att prestationsbehov inte predicerade arbetstillfredsställelse.

Purpose: The purpose of this thesis is to investigate potential associations between usage of the cash flow statement report and time perspective in which companies? acts and set goals. Method: Our approach is quantitative, using empirical data summarized in a statistical procedure. The result is thereafter analysed through the developed analysis model from which conclusion is drawn. Results: We have in the investigation stated that the usage of the cash flow statement report varies depending on the time perspective in which companies? acts.

We were commissioned by Bulten Stainless AB to identify and analyze their customer order flow. Because the company had problems with delays in the production and deliveries to the customer, the task also included investigation of how the company work with prevention and management of delays. The purpose of the project also included to identify critical factors for effective order flow in smaller workshop companies.The information about the flow and how the work takes place within the company were collected through observations on the company and interviews with the staff. This information was used to draw maps over the customer order flow and to write a description of the current situation within the company. Both strengths and weaknesses of the companies work could be identified through analysis of the present situation.

Results have shown that flow batteries may be a solution in the future as an effective and environmental friendly method to an energy storage system (ESS). The technology is reliable and has a high efficiency that comes with low energy losses and a long lifetime. The range of possible fields is suitable for cutting energy peaks in the power grid, by always have a ready and available energy storage that balances the production. By comparing the advantages of flow batteries with conventional batteries it is mainly the fact that they can conserve energy for a long time without being self-discharged thanks to that the storage capacity is in principle endless and limited by the size of the electrolytes tanks that makes them a great energy storage system. The batteries won?t take any damage or decrease in performance when charging or discharging it or if you exhausts it to 100 % and leave it discharged for a long time.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

Like many small-time companies there is a need to improve the flow of materials at HSP-Gripen AB. The company develops and manufactures hydraulic-powered grapples for the machine- and forest industry. By mapping the material flow in the current production and gathering necessary data, suggestions on how different parts of the production could be controlled is presented in this dissertation. This has been achieved by the study of relevant scientific literature. The suggested ways of controlling the production consist of 2-bin systems, hybrid material flow system as well as a cyclic product-planning.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

The upstream spawning migration of Atlantic salmon (Salmo salar) at the confluence area between the power-station outlet and the bypass-channel in river Umeälven (flow 430 m3s-1) was compared in 2004 and 2005, two years with different experimental flow-regimes. In 2004 the water flow in the bypass-channel was altered during the day with increased flows during the nights while the water flow in 2005 mainly was altered between the weekdays and weekends. Salmon showed altered migratory behaviour in this confluence area, assessed with telemetry (n=116) and echo-sounding, with up- or downstream responses depending on flow-changes in both the bypass and the power station outlet. Increased turbine flow through the power-station generally attracted salmon into the tunnel outlet area while increased spill-flows facilitated salmon to enter the bypass. Echo-sounding in the confluence area showed an increased swimming activity up- and downstream due to time in the day and flow-rates through the tunnel outlet. No changes in activity could be detected due to increasing or decreasing flow through the hydro-power facility.