The use of CAD, within the building industry came strongly, during the 1980?s and the 1990?s. The development has since then rapidly progressed and the using of 3D-models has in addition increased. We are now at the edge of next step of evolution. BIM, Building Information Model(ing), is here.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

Abstract This qualitative interview study focuses on job coaching by examining what thoughts, views and opinions the involved parties, such as job applicants and job coaches, have of the contribution. The aim is to highlight the obstacles and opportunities by examining the expectations that exist from both parties as well as how to look at job coaching and its different areas. In this context, examine the similarities and differences between the two parties approach to the contribution. This is made possible through four interviews with job applicants as well as four interviews with job coaches. A grounded theory inspired approach was used to obtain the results of the study.

We are always surrounded by space, not just only in a room with four walls, but also when we are outdoors.Constantly we move in a flow of space that changes whenever we move. Unaware we are affectedby this threedimensional surrounding of ours, and it reacts with our perception. Many times, we chooseto translate it into something two-dimensional, for example when we take a photo, recording a movie orframing a view with a window. It helps us to catch a moment, a piece of reality and restore it in our ownway. In this project I?ve chosen to explore this process, to interpret and create my own theories about thistranslation from space to a two-dimensional surface.

The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant.A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland.

Bakgrund: Kreativa aktiviteter har funnits inom arbetsterapin genom yrkets hela historia. Att vara aktiv är ett grundläggande behov hos människan. Aktivitet används både som mål och medel inom arbetsterapi för att främja personers hälsa och välbefinnande. Syfte: Att beskriva betydelsen av deltagande i kreativa aktiviteter, inom arbetsterapi eller på egen hand, för äldre personers hälsa och välbefinnande. Metod: Uppsatsen är genomförd som en systematisk litteraturstudie.

This thesis paper discusses the results of a survey which was conducted to investigate the potential usefulness of mobile apps in the maintenance department at Perstorp Specialty Chemicals AB. The paper contains four sections, a theory section, a method section , a section that explains the functionality of the app, and finally a results section where the results and conclusions of the survey are discussed. The theory section explains and discusses relevant terminology used in the computer science field and in the maintenance industry. The theoretical model used in this paper is also discussed. The methods section gives a stepwise description of the project and a description of platform and software used.

This thesis paper discusses the results of a survey which was conducted to investigate the potential usefulness of mobile apps in the maintenance department at Perstorp Specialty Chemicals AB. The paper contains four sections, a theory section, a method section , a section that explains the functionality of the app, and finally a results section where the results and conclusions of the survey are discussed. The theory section explains and discusses relevant terminology used in the computer science field and in the maintenance industry. The theoretical model used in this paper is also discussed. The methods section gives a stepwise description of the project and a description of platform and software used.

The producers of grain in Sweden are facing a rough future. The competition is getting harder all the time, in Sweden, in EU and also from the ?world market?. The producers have to be more efficient and have to have bigger units. Many producers might have to look for new alternative production opportunities.

Skolan har fått i uppdrag att implementera hållbar utveckling i undervisningen. Enligt skolverket ska hållbar utveckling genomsyra all utbildning. För att undersöka hur lärande i hållbar utveckling har implementerats i undervisningen intervjuade jag sex lärare på en gymnasieskola. Lärarna som intervjuades arbetade som naturkunskapslärare, fysiklärare och samhällskunskaps-lärare. Studien visar att de intervjuade lärarnas syn på vad hållbar utveckling i undervisningen innebär varierar.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.