The purpose with this report is to examine how the implemented energy efficiency measures on Bokelundskolan in Växjö have had impact on the energy use. The measures which have been implemented are, new ventilation system, new heating system, optimized adjustment of the heating system, new windows with U-value 1.2 and lower window height, insulation under windows and in the crawl space. The school's energy use before and after rebuilding has been calculated with the calculation program, Vip-Energy 1.5.5.Calculations of energy use for the school with windows on U-value, 0.9 and 0.7 have also been done. The replacement of windows has been studied from a cost perspective. The conclusion is that the exchange of heat and ventilation system was the biggest contributor to reduced energy use on Bokelundskolan.

We have performed a case study on Acne Jeans, a creative Swedish fashion company, which initiated a cooperation with the Swedish venture capital firm Öresund. The aim of our paper was to examine what motivates a venture capital firm to transform the management control system of a creative company, into a more formal system of control. Main results: Öresund did not have an excessive impact on the management control system of Acne Jeans, due to three main reasons. First of all, Acne Jeans had a satisfactory management control system prior to the cooperation. Furthermore, the relationship between the two parties was characterized by mutual trust.

Svenska Kraftnät is (together with the other transmission system operators of the Nordic power system) responsible for keeping balance between the generated and demanded power in the Nordic power system. Spontaneous load variations and system disturbances, however, lead to power imbalance followed by frequency variations. The frequency deviations can be limited to an acceptable level by the spinning reserve, mainly by hydro power control. But there are also other system properties which have a great influence on the frequency and system stability. The frequency and voltage dependence of the loads have a direct influence on the power balance.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

De stora fotbollsligorna i Europa spelar höst till vår, medan vi i Sverige spelar vår till höst. Då vi i Sverige kan se problematik med låg täckningsgrad och slitna gräsmattor under vår säsong, vad händer om vi skulle spela mellan höst till vår? UEFA ställer krav på att fotbollsplanen skall vara spelbar för alla matcher under säsongen. Problematiken på svenska fotbollsarenor under vintern är den låga temperaturen och dålig ljustillgång kombinerat med mekaniskt slitage. Syftet är då att belysa problematiken med att upprätthålla en tillfredställande spelkvalitet på naturgräs i fotbollsarenor. Uppsatsen avgränsar sig genom att behandla problematiken i Skandinavien och främst södra Sverige. Ekonomi, konstgräsbanor, dränering och värmetillförsel berörs endast ytligt.

In Stockholm, Johanneshov the Slaughterhouse area (Slakthusområdet) can be found. A number of companies have gathered there providing the Stockholmers with meat products. This area has a great need for cooling to supply large cold storages. To facilitate this, a central cooling system has been built, supplying the area with effective and safe cooling.The aim of this master thesis study is to give hints to energy efficient and reliable changes that can be put in place at a low marginal cost depending on the future activities in the area. The suggested changes will be presented to the company Bravida (managing the system), which also desires a deeper understanding of the energy flows through the central cooling system.Firstly visiting the site with proper guidance, we have then tried to understand the function of the system including which machines and media that are used.

Inbyggda system blir allt vanligare i dagens samhälle. De inbyggda systemen finns i nästan allt nuförtiden, från diverse fordon till leksaker för barn.Dagens teknik innebär bland annat att gårdagens lösningar kan realiseras på en bråkdel av den tidigare ytan. Allt mer blir ytmonterat med mindre och mer komplexa kretsar. Detta är inte alltid till utvecklarnas fördel då montering av prototypkort blir en svår och/eller dyr process.Målet är att ta fram ett inbyggt system med en ARM-processor. Systemet ska innehålla USB-OTG, ethernet, minne av olika slag som FRAM och microSD samt en display med pekskärm för användargränssnitt.

The aim of this study is to examine the possibilities to use gamification to reach thepolitical goals for the transportation system in the Stockholm region. The study has aninterdisciplinary approach and is based around two main building blocks: gamificationand the transportation system in the Stockholm region. The first part examinesgamification. This includes contemporary use, debate, academic definition and aninvestigation of how gamified applications should be developed. One of the mainfindings is a suggestion that gamification should be seen as a process rather that a setof predefined game mechanics that can be applied to any activity.

Projektet har gått ut på att göra ett flexibelt bord som ska kunna gå att förändra mellan högt och lågt och mellan olika storlekar på bordsskivan. Detta som en funktionell aspekt av föränderlighet men jag ville även införliva en emotionell föränderlighet. Jag vill att användaren, på ett handgripligt sätt, ska kunna uttrycka sig själv i bordet. Min intention är att man, genom att göra sitt eget unika bord, skapar ett starkare band mellan artefakt och dess användare. Detta som ett led i en hållbar utveckling så att produkterna vi äger kan brukas längre och motverka den ohållbara så kallade slit-och-slängkulturen..

The purpose of this study was to create a picture of Södra´s round wood transporters usage, and positive or negative experiences of the KOLA-system. The KOLA-system, owned and managed by SDC, is a program for handling timber orders and displaying their locations on digital maps. The study was conducted as a twenty-three question internet-based survey. Of those asked to complete the survey, 57 percent chose to answer the questions. The results of the study indicated that several of the transporters found the system quite good and used it to a large extent. The system also had many deficiencies however, and there was clear potential for further increasing the usage of the system.

The purpose with this study is to compare different systems of grain storage from a financial point of view. Grain that is supposed to be fed to laying hens. The systems that were compared were different airtight storage of grain and a system of conventional storage. To make this case study I choose to compare four different systems. In the case study there was one system with bin drying of the grain, two systems with airtight storage of the grain and one system where you buy dried grain during the season. I made several of capital investment appraisal where I found the cost of each system, then I took the cost and divided it with the total grain use and calculated the cost for each kilogram of grain, and also the cost of the feed. Then I compared the cost from my case study with the cost of buying feed. All the systems except for one, gave a lower cost for the hen feed than buying feed from a dealer The best system, witch were bin drying lower the cost with about 80 000:- SEK.

Detta examensarbete syftar till att utforma ett förslag på ett produkt- och processvalideringssystem som skall kunna användas för att säkerställa kvaliteten på inköpta komponenter. Valideringssystemet är utformat för att användas av företag som arbetar med låga volymer, hög ändringsfrekvens och stor artikelflora. Utgångspunkten i utformningen har varit standarder och metoder som används inom fordonsindustrin: QS-9000, ISO/TS 16949, APQP och PPAP. Examensarbetet är genomfört på Atlas Copco Rock Drills AB (AC) och systemet har utformats och anpassats utefter de förutsättningar som råder där vad gäller volym, ändringsfrekvens och artikelflora. Ökad tillväxt och konsumtion världen över har medfört ett stigande behov av metall, vilket i sin tur har inneburit en växande efterfrågan på gruvutrustning. AC som bland annat levererar produkter till gruvindustrin har upplevt en förhållandevis stor ökning i produktionsvolym de senaste åren.

Detta examensarbete syftar till att utforma ett förslag på ett produkt- och processvalideringssystem som skall kunna användas för att säkerställa kvaliteten på inköpta komponenter. Valideringssystemet är utformat för att användas av företag som arbetar med låga volymer, hög ändringsfrekvens och stor artikelflora. Utgångspunkten i utformningen har varit standarder och metoder som används inom fordonsindustrin: QS-9000, ISO/TS 16949, APQP och PPAP. Examensarbetet är genomfört på Atlas Copco Rock Drills AB (AC) och systemet har utformats och anpassats utefter de förutsättningar som råder där vad gäller volym, ändringsfrekvens och artikelflora. Ökad tillväxt och konsumtion världen över har medfört ett stigande behov av metall, vilket i sin tur har inneburit en växande efterfrågan på gruvutrustning.

The Thesis purpose is in the context of system development validate the Scrum Methodology. Projects concerning information technology are difficult to manage and tend to fail in quality, time or costs. Scrum presents a new view of the system development. Better cooperation between customers and developers, continuous follow-up on daily basis and extensive communication in the development team are all characteristics of Scrum. Scrum is described as a new paradigm by its founders but has been criticized by experts of system development too.

This thesis is based on an assignment from a unit within an international group manufacturing industrial products. The purpose of the thesis is to analyze and suggest ways to improve the cost accounting system in use at the unit. The main source of empirical data has been interviews with employees. The theoretical framework is based on a comparison between traditional/standard costing and activity-based costing (ABC). The cost accounting system in use is described in detail and classified as a traditional/standard cost accounting system.