Until the beginning of the 1900:th century the paper making process was handicraft. The paper machines that have been developed since then are as impressing in size as fascinating when it comes to the technique. The process has always been improved to give a better paper for lower costs, with as short manufacture time as possible. Stratified forming has been a reality since 1830. From the beginning it was applied to board and paperboard.

Soft rubber flooring have gained in popularity over the last years. Rubber flooring al-lows cow to move more freely without slipping and improves claw and leg health. The purpose of this study was to investigate the influence of a stepwise introduktion of soft flooring on cow`s placement in cow houses with robotic milking. A case study was carried out in a herd in northern Sweden with 41 cows. Observations were made every 15 minutes between 09.00 and 16.00 concering cow placement in cu-bicles, in cubicle alley, in feeding alley and in feeding alley with the head through feed-ing gate. One observation period was carried out per flooring alternativ: 1) all concrete slatted floor, 2) rubber slatted floor in feeding alley and concrete slatted floor in cubicle alley and 3) rubber slatted floors in feeding alley and solid rubber floors in cubicle alley. The study showed that 6 %-units fewer cows lay in the cubicles when the feeding alley surface was slatted rubber.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

This paper gives an introduction to the theory of minimal surfaces. It is in- tended for undergraduate students with some basic knowledge of differential geometry and complex analysis.After defining the concept of minimal surface and giving a brief histo- rical survey, we look at some well-known minimal surfaces and a few of their characteristic properties. The connection between minimal surfaces and harmonic functions is discussed and the Weierstrass-Enneper represen- tation formulas are introduced. We also present Bjo?rling?s problem and give some examples. .

This paper gives an introduction to the theory of minimal surfaces. It is in- tended for undergraduate students with some basic knowledge of differential geometry and complex analysis.After defining the concept of minimal surface and giving a brief histo- rical survey, we look at some well-known minimal surfaces and a few of their characteristic properties. The connection between minimal surfaces and harmonic functions is discussed and the Weierstrass-Enneper represen- tation formulas are introduced. We also present Bjo?rling?s problem and give some examples. .

In this report an MCNP (Monte Carlo N-Particle) model is described for the reactor vessel at Ringhals 2. The model is validated against the specific activity in neutron dosimeters, extracted in 1977, 1984 and 1994. The validation showed that the calculations of the model are within the requirements of a maximum of 20 percent uncertainty for every neutron dosimeter except one, extracted after the first cycle. The uncertainty of this cycle was mostly due to the operation data rather than to the MCNP model.The model has been used to investigate various questions concerning radiation damage. The reliability of the traditional measure of radiation damage, fast neutron flux (En > 1MeV) has been evaluated.  This has been done by taking the ratio for this and another measure of radiation damage, DPA (Displacement Per Atom), for various positions and layers.

The thesis evaluates a new kind of bearing arrangement in a traction motor that ABB hasdeveloped. Since the arrangement is designed in a new and innovative way it needs to beevaluated to see if it is safe to use. In today?s traction motors, bearings with a big internalclearance (C4-clearance) are used. The basic idea of the new arrangement is to reduce the fitsbetween the bearing and shaft/house.

This paper gives an introduction to the theory of minimal surfaces. It is in- tended for undergraduate students with some basic knowledge of differential geometry and complex analysis.After defining the concept of minimal surface and giving a brief histo- rical survey, we look at some well-known minimal surfaces and a few of their characteristic properties. The connection between minimal surfaces and harmonic functions is discussed and the Weierstrass-Enneper represen- tation formulas are introduced. We also present Bjo?rling?s problem and give some examples. .

Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

This paper gives an introduction to the theory of minimal surfaces. It is in- tended for undergraduate students with some basic knowledge of differential geometry and complex analysis.After defining the concept of minimal surface and giving a brief histo- rical survey, we look at some well-known minimal surfaces and a few of their characteristic properties. The connection between minimal surfaces and harmonic functions is discussed and the Weierstrass-Enneper represen- tation formulas are introduced. We also present Bjo?rling?s problem and give some examples. .

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..

This paper gives an introduction to the theory of minimal surfaces. It is in- tended for undergraduate students with some basic knowledge of differential geometry and complex analysis.After defining the concept of minimal surface and giving a brief histo- rical survey, we look at some well-known minimal surfaces and a few of their characteristic properties. The connection between minimal surfaces and harmonic functions is discussed and the Weierstrass-Enneper represen- tation formulas are introduced. We also present Bjo?rling?s problem and give some examples. .

If one looks at physical planning in Sweden today one can see that while talking about densification of existing development, reduced emissions and careful use of important land, urban sprawl is a fact with development of sheer residential districts in the urban edges and shopping malls in each and every municipality. As sustainable development is an essential goal for physical planning to strive towards, it is worth questioning if the direction of today?s planning will lead to the goal. A sustainable development can be seen as an obvious to goal aim at. In reality the aim means a hard and complex work.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

The overall aim with this study was to explore the understanding of how nursing staff - at a service flat in the county of Gävleborg, is related to the residents with intellectual disabilities, with regard to the residents' health. Five personal research interviews were conducted with nursing staff in a sheltered housing. The survey was based on a qualitative method with semi-structured interviews. Five nursing staff aged 27-57 were participated in this investigation. The analysis was conducted, by using a thematic approach.My overall findings show that Nursing staff have different roles to play depending on the situation in their relationship with the residents.