Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

BakgrundOperationspersonal är den yrkesgrupp inom vården som är mest utsatt för risk för blodsmitta genom frekvent hantering av stickande och skärande instrument samt exponering av blod. Bland operations­sjuksköterskor finns en stark önskan att arbeta så säkert som möjligt för att minska risken för smittöverföring. Det finns föreskrifter, metoder och hjälpmedel för att förhindra stick- och skärskador men få skriftliga riktlinjer och rutiner.SyfteSyftet med den här studien är att undersöka operationssjuksköterskans hantering av stickande och skärande instrument i operationssalen.MetodStudiens design är en empirisk tvärsnittsstudie med en kvantitativ ansats. En strukturerad observationsstudie utfördes på Södersjukhuset i Stockholm. 18 operationssjuksköterskor observerades under 50 operationer.ResultatStudiens resultat visar på brister inom samtliga områden som observerats.

The object under investigation in this Master?s thesis is students? information use in connection to Bachelor thesis writing. The purpose of the study is to increase understanding of why nursing students and product engineering design students are using information in such different ways despite their comparable starting point. The empirical material consists of 18 student theses and a document comprising directives for thesis writing that are analysed from three different theoretical perspectives. A citation analysis of all 18 theses is carried out.

This thesis examines the conditions for participation in the decision making process of a possible mine establishment in Storuman municipality in the north of Sweden. This is done through a case study where the main actors are the mining company Nickel Mountain AB, the municipality Storuman and the Sami village Vapsten. As a theoretical framework Cecilia Eriksson?s division of democratic theories is used as a starting point. Methods as described in deliberative democratic theory, such as discussion by effected community members, are seen as a method within the participatory democratic tradition, not a theory of its own.

The purpose of this study was to examine how the design of the wards, at Björnkulla nursing home, affects the residents? wayfinding ability and autonomy. Thus, the aim has been to make a design proposal that, trough color and design can increase the residents? chance to independent mobility. Since the study aimed to examine how the environment affect and can support people with dementia, qualitative methods were used.

Working with health-management has become something most organizations would describe as essential for being legitimate today. The aim of this thesis is to investigate how this subject is handled in an existing company and how this work is percieved by the employees in the organization. Due to the fact that limited research has been conducted on this issue, we see this thesis as a potential for increasing the understanding of how health management is articulated in practice. Our results show that health management in our studied organization is far reaching in comparison with most organizations, but has room for improvement according to the Integral Theory. The consequence of differences in perceptions between management and employees could result in that health management does not become an integral part of the company and its daily operations to the potential extent..

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

In today?s society climate change has grown to one of the largest global issues. To reduce emissions of greenhouse gases, large changes of the energy system are required. An increasingly popular solution is investments in local production of renewable energy resources like wind, solar or geothermal power. The following report examines the possibility for implementing a solar power plant on the new hospital Nya Karolinska Solna. Two different technologies for extraction of solar energy has been studied, solar thermal collectors  to meet the need of heating and solar cells to satisfy the need for electricity linked to operating the hospital building.

Det här projektet har syftat till att utreda hur en vald målgrupp förvarar och vill förvara sina kläder samt hur ett klädförvaringssystem för denna målgrupp bör vara utformat för att uppfylla användarens krav och önskemål. Funktionalitet, användarvänlighet och ergonomi är begrepp som genomsyrat projektet från start till mål och målgruppen definierades i projektets början. Utbudet av klädförvaringssystem för dressing room i Sverige är idag väldigt begränsad. Kökstillverkaren Kvänum Kök AB har fått många förfrågningar om klädförvaringssystem som håller samma höga klass och exklusivitet som deras kök. Denna kategori, inredning för dressing room, lämnar ett stort hål i det annars så välfyllda utbudet av förvaringssystem på den svenska marknaden.

For an outdoor environment to function optimally as a playarea requires that it is flexible, that is, contains places and elements that give room for the imagination and for own interpetretations, and also that the children in some way can influence and change their surroundings. It is also important to have variety, both in the sense that the playground has a unique character that distinguishes it from other places, and that it allows many different games and activities. There should for example be room for both wild games of running and moving around where many children can participate, and calm corners to withdraw to for rest or quiet play. A good playground should surprise, challenge and encourage children to discover their surroundings. One way to achive this is to use plants and materials from nature, whose irregular forms and structures can become interesting elements to explore. Vegetation also gives sence-experiences of various kinds, materials like twigs and leafs to play with and a place to play house.

This study is one of five that has been done based on Lunds Energi?s planned investment in bioenergy. The plan is to build two large burners, at Örtofta, that?s going to be supplied with biofuels. In this study I take a closer look on the profitability when you choose to sell your cereal as bioenergy. I?ve been calculating with selling the straw from the grain crops and winter rape, selling the rye weat as whole crop and fertilize the hemp with sewage sludge.

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

This project is about color and light and how it affects the atmosphere in the city. I choseto look closer into the central parts of the city, a place where I often feel a lack of lightand color, especially during the winter season. In the beginning of the project I made ananalysis of how intense colors are used in the city and how we can use color as a tool tocreate effectful spaces. Further into the project I chose to look closer into the effects thatare made by the facades, how the light from the windows affects the room outside when the dark falls. At the end of the project I caught a feeling inspired by the city and applied it into an installation of light..

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.