The municipality of Sandviken is in a state of strong growth. This affects the need for more hotel rooms in Sandviken, in a way that it?s profitable to invest in a new hotel. Sandvikens largest company, the steal industry Sandvik AB, grows just like Sandviken, and have great influence on the need of more hotel rooms. Today there are three hotels placed in Sandviken, and these hotels aren?t enough when the pressure of hotel guests is at its top.The purpose with the project was to analyse the criteria?s that are important for localization of a new hotel in the Sandviken, and to clarify what kind of hotel Sandviken is in need of.

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

Between 1965 and 1974, the Swedish Parliament decided to build one million dwellings, called Million Program. The million program buildings were erected with new, untried design solutions, in a short range of time, and at low cost. The residential buildings from that time are now greatly in need of renovation. The municipal housing company, Gavlega?rdarna, renovates and improves the energy efficiency at some of it?s apartment buildings in the district Sa?tra, Ga?vle.

Sweden's aging population makes the need for a viable health care urgent and telemedicine can be a solution to enable older people to receive or give themselves care in their homes. Furthermore, implementation of telemedicine has the potential to realise profits in society by increasing the accessibility of health care and minimizing travel costs. Sweden?s low population density and geographical configuration makes the advantages of telemedicine even more appealing. To illustrate the differences between the county councils? use of telemedicine and thus increasing the possibility for coordinated care between them, the authors have on behalf of the Innovation Centre at the Karolinska University hospital mapped the amount of telemedicine technologies that are available in the Swedish county councils? today. To collect information an electronic survey and video or telephone interviews were used.

In the centre of Bromma, east of Brommaplan is the part of Bromma named Riksby. Riksby was built in the early 1940:s as a part of the westward expansion of Stockholm. Other places that were built at the same time was for ex. Stora Mossen and Abrahamsberg. This work is about the outdoor environment of the housing co-operative of Brickbandet.

The aim of this paper is to empirically examine the ideological trends and positioning of the Swedish liberal party with the Danish social liberal party. This paper also aims to analyze the reasons behind the trends. By examine the development in these two Nordic liberal sisterparties, this paper contributes to our understanding of why and how party change is initiated. The paper commences with an intuitive notion that the Swedish party has in fact, made a lurch towards the right, during the past ten to fifteen years while the Danish party has retained their social-liberal position in the centre of the Danish political spectrum. The questions then asked are: can this hypothesis be verified empirically? If so, how can this phenomenon of divergence, be explained?The method used in this thesis is process-tracing and the empirical material does to a large extent rely on interviews with central agents as they are specified in the theory of each party.

Outsourcing och specifikt callcenter outsourcing diskuteras bland företag. Tyngden i diskussionen ligger på kvalitén, som är en aktuell aspekt av fenomenet callcenter outsourcing. Frågan berör flera parter; de företag som outsourcar, callcenter och konsumenter. Callcenters är organisationer som är specialiserade inom kundkontakt och har i uppgift att kommunicera med företags konsumenter, genom att svara på frågor eller bidra med övrig information och hjälp som konsumenten är i behov av.Teorier som ligger till grund för vår uppsats, rör callcenter outsourcing, kvalitet och kvalitetssystem. Vidare har vi diskuterat var forskningen står idag och utifrån det identifierat vårt valda forskningsområde, där vi ämnar besvara frågan gällande vilka olika kvalitetskrav som kunden ställer och hur dessa säkerställs hos den outsourcade callcenterfunktionen, det vill säga leverantören av tjänsten.

This report describes the master thesis project ?Weight Optimization of a Composite Chassis for a Multimodal Lightweight Vehicle? which is a part of the Master program in Naval Architecture and a part of a research project at the Centre for Naval Architecture, KTH. Demands on smart and energy efficient transport solutions are continuously increasing. In the Stockholm region the citizens are expected to increase with 25% and the road vehicles with 80% until 2030, putting high demands on the traffic system. Using a small multimodal vehicle deals with this problem and uses both the land and waterways for transportation.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

This is my final thesis in landscapeplaning at the Swedish University ofAgricultural Sciences (SLU). I discuss howthe countryside should be planned, witha sustainable perspective. In the study Iexamine four important conditions forplanning.The countryside is often defined bywhat it is not which makes it difficult todescribe in general terms. The definition ofthe term countryside in this study is takenfrom the National Rural DevelopmentAgency (Glesbygdsverket). The conclusionis: Planners and scientists should have anunderstanding for the complexity of thecountryside; otherwise there is a risk oflosing the characteristics of the country.The legislation, goals and conventionswhich have an impact on the Swedishcountryside are both national and international.To find out how the settlementdevelopment is dealt with, I havestudied the Swedish building legislations(among others, plan- och bygglagen andmiljöbalken).Similar to the difficulties on finding asuitable definition for the term countryside,it is complex to define the term sustainabledevelopment.

Tropical rain forests only cover around six percent of the world?s land area and contain around 70 % of the world´s animals and plants. Tropical rainforests have been, and still are, negatively affected by human activities. These activities lead to forest degradation which has negative impacts on production and biodiversity. Between 1970-1980 forests in Borneo, Sabah, Malaysia, was subjected to intense logging.

Competence Portals are software tools that are intended to make it easier for persons that have had no previous contact to find and contact each other. The portals can address areas ranging from finding an expert within an organisation to the marketing of the competence of a region or a research centre to other organisations. The purpose of the thesis is to examine the necessity of Competence Portals in research-intensive organisations. Important characteristics of the information in such portals have been identified and used as a basis for recommendations regarding how Competence Portals could be designed. Furthermore, the thesis focuses on the task of finding a source of knowledge within an organisation.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

The object of the thesis is to propose a new design for the neighbourhood of Veiberg that is situated in the small Norwegian town Jessheim. My approach was to first make an analysis of the whole community and the structure of the town, and then gradually focus on the actual neighbourhood to continue the research there. On the basis of my research the block will be redesigned. The research will lead to a well-planned design of the neighbourhood, which will adapt it to its surroundings in a sustainable and constructive way. The project will lead you through the history of the town and the intentions and aims of the municipality. The project also examines the structure of the town and the function of the neighbourhood in the town today as well as investigation of the history, the structure and the qualities in the area.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.