The effects of dexmedetomidine and butorphanol sedation on skin reactivity during intradermal testing in healthy dogs were evaluated. The effects of dexmedetomidine and butorphanol were compared to medetomidine, a sedative agent having scientific proof of not interfering with skin test reactivity, in a randomised, double blind, cross over study performed on 8 adult dogs. The dogs were sedated with medetomidine (Domitor vet.®, 0,01 ml kg-1) intravenously, or dexmedetomidine and butorphanol intramuscularly (Dexdomitor vet.®, 0,01 ml kg-1; Dolorex vet., 0,01 ml kg-1) after which they received intradermal injections of positive control solutions (histamine 0,1 mg ml-1, 0,05 mg ml-1, 0,025 mg ml-1), a negative control solution (0,9 % NaCl) and allergen extract (Dermatophagoides farinae, Cladosporium and Artemisia vulgaris). After a wash out period the trial was repeated with a reversed sedation protocol.Skin reactivity (wheal size, induration and erythema) and quality of sedation (immobilization, response to stimuli and injections as well as over all working conditions) were evaluated. The combination of dexmedetomidine and butorphanol provided reliable, good sedation and analgesia without adverse effects.

This thesis deals with the design of a combinated rescue-, personal-, and firefighting elevator for a nuclear waste storage facility to be constructed by the client SKB, Svensk Kärnbränslehantering AB. SKB:s mission is to dispose of all nuclear waste from all swedish nuclear power plants. The storage facility will be built in the rock 450 m under the surface and will consist of several kilometers of tunnel where capsules containing the nuclear waste will be placed. It will also hold a central area which contains spaces necessary for the operation and construction of the facility, such as elevator hall, storage hall etc. The facility will have two ways of access: a vehicle ramp and an elevator shaft.

During the past few years there has been an observed decrease in physical fitness within different patient groups. As a part of the rehabilitating physiotherapy treatment it is important to acknowledge the physical condition of the patient. Physical fitness testing might be difficult due to physical limitations within different patient groups. A broad range of exercise tests is therefore of importance in clinical practice. The aim of this overview was to describe exercise tests used in rehabilitation contexts, and to define areas of use and restrictions.

Bakgrund: Uppsatsen tar upp problematiken kring att organisera arbetstid inom räddningstjänst. Grundförutsättningarna är att räddningstjänst är en High Reliability Organisation (HRO) och att det påverkar organisationen. I och med New Public Management (NPM) framfart och den ekonomiska situationen i världen har räddningstjänsten fått ett ökat krav på kostnadsbesparingar och resursutnyttjande. Då personalkostnader står för en stor del av räddningstjänstens kostnader kan förändringar av brandmännens arbetstid och skiftgång vara ett logiskt steg, något som skett i Greater Manchester Fire and Rescue Service (GMFRS).Syfte: Syftet med uppsatsen är ett ge ett teoretiskt bidrag till hur NPM influerade reformer påverkar en HRO. För att göra detta frågar vi oss vad de olika skiftformerna får för konsekvenser för de anställda och organisationen.Metod: Uppsatsen har en kvalitativ forskningsansats vid studerandet av fallorganisationen Greater Manchester Fire and Rescue Service och Storstockholms Brandförsvar.

There are several ways of conducting software testing where some may include users and others may include personnel whose work task is to execute test on systems. Although most developers and project managers understand the point of testing the system, it is not always being done and the most common reason is that there is no time for it. However, this is a false assumption as it may instead cause some bugs in the system that would not have been there in the first place if tests had been there to prevent bugs in the code.My purpose for this thesis was to find suggestions for changes in the development process in an ongoing project used by Acino and Svenska Försäkringsfabriken in order to increase the quality of the system used. In this thesis, I have approached the purpose by pursuing a case study of the two companies through observation and interviews. By doing this I acquired the relevant information to make suggestions for change.

In this study I analysed how burning affects sprouting ability and survival of oak (Quercus robur) during the first season after a burn in southern Sweden. The study consisted of two separate field tests; in the first, two 300 m2- plots in western oak dominated forest were burned to analyze the fire behavior and the immediate mortality of oak and beech seedlings defined as individuals (> 20cm of height). At the end of the season almost 50% of the oak seedlings had resprouted while the beech seedlings had 100% mortality. An attempt to investigate the effect of the burn of artificially sown acorns was totally ruined by wild boar grouting before any conclusive results could be seen. In the second test the resprouting ability of oaks of varying diameters (average BHD 7-9 cm, range 2-42 cm) was examined one season after a prescribed burn in southeastern Sweden.

Modern semiconductor design methods makes it possible to design increasingly complex system-on-a-chips (SOCs). Testing such SOCs becomes highly expensive due to the rapidly increasing test data volumes with longer test times as a result. Several approaches exist to compress the test stimuli and where hardware is added for decompression. This master?s thesis presents a test data compression method based on a modified facsimile code.

In Scandinavia the general idea of the Bronze Age society is that it was organised as chiefdoms. The model for what they looked like is taken from the anthropological studies of the Polynesian chiefdoms. The aim of my study is to investigate a Scandinavian Bronze Age feature, known as cairns mainly containing fire-cracked stone. This is compared with how people in different Polynesian chiefdoms, looked at similar remain. This is done to get a background for new ways of interpretation of such remains.

The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

This essay examines pull-out strength of threaded rods fixed into glulam timber. The technology is intended to be used in hidden joints between glulam components. The work began with a study of literature focusing on current research within the topic, mainly to create a base of knowledge before the testing was initiated. Studies of scientific articles reveals a lack of research within this area, which makes it difficult to develop standards and calculation models for these joints. The drill holes in the tests have a diameter of 7 mm.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2013:09.

The aim of this study is to evaluate whether the value of occupant load is over or under estimated when the Swedish general value for department stores, 0,5 person/m2, is used for dimensioning shopping centers. The data that was analyzed derives from seven shopping centers and one department store. A conservative method was used to calculate the occupant load factor. The analysis shows that two groups can be discerned: one group that is characterized by a lower occupant load factor that does not exceed 0,3 person/m2, and one group with a higher occupant load factor. Shopping centers with a higher occupant load factor are located centrally in large urban areas.

In Scandinavia the general idea of the Bronze Age society is that it was organised as chiefdoms. The model for what they looked like is taken from the anthropological studies of the Polynesian chiefdoms. The aim of my study is to investigate a Scandinavian Bronze Age feature, known as cairns mainly containing fire-cracked stone. This is compared with how people in different Polynesian chiefdoms, looked at similar remain. This is done to get a background for new ways of interpretation of such remains.

AbstractA continuous improvement of products and production is an important goal for a modern industrial company. A small engineering group located in Sweden came in touch with the authors of this report during the spring semester of 2014. The aim of this report is, as part of the group´s ambition of improvement, to analyse ways in which the quality of component casted parts can be verified. Non-destructive testing (NDT), and methods to use it for quality control, is the main focus of this report. However, fields such as material standards, component casting and quality engineering are analysed as well.