Sökresultat:
9535 Uppsatser om Finite element method - Sida 34 av 636
Development of a method for determination of pesticide residues in honey using liquid chromatography tandem mass spectrometry
Honey is a product that may contain pesticide residues due to contamination from bees pollinating various plants as well as elimination of vermin inside the hive. Different methods are needed for analysis of pesticides, since the term includes a wide range of different substances. National Food Administration lacks a validated method for determination and quantification of pesticides in honey using liquid chromatography tandem mass spectrometry, LC-MS/MS. The technique is especially important in analysis of polar and non-volatile pesticides, where gas chromatography is not functioning optimally. After investigating what pesticides could be found in honey produced in Sweden, a number of four pesticides suitable for analysis with LC-MS/MS was compiled; boscalid, impidacloprid, tau-fluvalinate and thiacloprid.
Stereoseende i realtid
In this thesis, two real-time stereo methods have been implemented and evaluated. The first one is based on blockmatching and the second one is based on local phase. The goal was to be able to run the algorithms at real-time and examine which one is best. The blockmatching method performed better than the phase based method, both in speed and accuracy. SIMD operations (Single Instruction Multiple Data) have been used in the processor giving a speed boost by a factor of two..
Glidytor och ytjämnhet med avseende på friktion och tätning
Gliding and sealing functions in Öhlins shock absorbing systems sets great demands onthe contacting surfaces. In this particular case, the bushings and the sealings on acylinder piston. The surface wanted is a surface with both low frictional forces and smallleakage. This study was done with the goals of investigating and determining existingsurfaces due to the frictional force and leakage. How can we in an easy mannerdescribe these?A number of ten front forks were part of a main study.
Analys av linjetaxering i samband med gallringsinventering med avseende på kvalitet, tillförlitlighet och framtida utformning
Modern forest owners are very familiar with forest management and forest economics. Therefore they have high demands for quality in forest operations. Guarantee of quality in the shape of self-checking activities is an important tool to guarantee a well managed forestry operation. To meet the forest owners? demands on guarantee of quality and the entrepreneurs wish of an easy method for self-checking, the forest owners association, Södra skogsägarna, has developed a new method for thinning inventory.
The purpose of this study is to evaluate the method that is used for self-checking and to find ways to develop and improve of the method.
The data has been collected by inventory in a number of stands with circle-area survey and with strip survey, which is method that is used for self-checking.
The results show that the strip survey does not diverge more than ±10 % in measuring values of basal area, number of stems, roads share, thinning quotient, outtake of basal area and total volume compared to circle-area survey.
Unified Flow Sensor
Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.
Texturbestämning genom fält-, pipett- och hydrometermetoder :
Texture is an important soil property and accurate particle size analysis of soil texture is therefore crucial. There are a number of well-established and newly developed methods available for determining soil texture. In order to compare the results of these methods, the differences between them must be determined.
The difficulties, problems and differences regarding texture class determination were examined through a study performed on forest soil samples. The study compared different methods (pipette, hydrometer and field methods) and two types of dispersing agents (sodium pyrophosphate and sodium hexametaphosphate (calgon)) commonly used for particle size analysis.
Utvärdering av substrat för biogasproduktion
The purpose of this study was to evaluate the different substrates that enter the digestion on Sundet wastewater treatment plant for production of biogas.This work have done an analysis of data about the biogasproduction from January 2012 to feburari 2013, this showed that the food substrates has a greater gas production than internal sludge.Through laboratory test the VS, TS and COD values for all the substrates used in the biogas production could be determinded. But the COD-method was less optimal for analysis of fat and food, therefore it optimized the method for fat but due to time constraints, this could not be done on the food substrates..
Kommunikativt miljöhus : Nya lösningar för soprummet
Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.
Viking Eggeling och Diagonalsymfonin : en dematerialisering av konstobjektet
The aim of this thesis is to study Viking Eggeling?s artwork Diagonal Symphony together with Eggeling?s own art theoretical writings. This method of reading Eggeling?s art theoretical writings with the aim to try and create a deeper understanding of his art and especially Diagonal Symphony is a new approach in Eggeling?s art historical discourse. The thesis starts with a description of how the field of art history has understood Eggeling and his art primarily through art historical research aimed at Hans Richter.
Ha?ll ka?ften, slappna av och va?ga rocka Europa! : en studie av den sociala kulturen och arbetssa?ttet i ett rockband pa? turne?
Detta a?r en studie av den sociala kulturen och arbetssa?ttet hos ett specifikt rockband. Studien har utfo?rts med element av etnografisk forskningsmetod och ger la?saren en bild av hur det kan se ut och ka?nnas att delta i en rockturne? i Europa. Resultatet ger en inblick i det vardagliga livet och den mellanma?nskliga interaktionen hos deltagarna i turne?n, samt fo?rfattarens egna tankar kring arbetet med att utfo?ra studien..
Läsinlärning och läsinlärningsmetoder : En kvalitativ studie om verksamma lärares val av läsinlärningsmetoder för läsinlärning hos barn i klasserna Fk-3
This study centres on learning to read and methods for teaching reading skills. The aim is to provide a survey of the concept reading skills and the methods developed on the basis of different theories and the methods preferred when teaching children in primary school and why. The study is based on interviews with eight teachers who are working on a dailybasis teaching Swedish in preschool class or lower primary school. The result of my study is that the majority of teachers do not use a specific method, but rather combine several different methods, thus adapting instruction to each individual pupil. .
Hur pojkar och flickor lär sig könsnormer i hälsa : En diskursanalys av läromedel i idrott och hälsa
Studiens syfte är att identifiera olika hälsodiskurser i läromedel för idrott och hälsa, som riktas mot högstadiet och gymnasiet, som unga män respektive unga kvinnor socialiseras in i genom deras möte med läromedlen.Med en diskursanlytisk utgångspunkt och metod för att förklara bilders meningserbjudande i deras litterära kontext analyseras bilder och den litterära kontexten bilderna existerar i, från fem olika läromedel till idrott och hälsa. Det meningserbjudande bilderna innehåller problematiseras genom Foucaults teori om makt, och socialisationsteorins teori om socialisation och diskursernas reproduktion.Studien kommer fram till att hälsosamma kvinnor och män definieras olika. Den hälsosamma mannen är vältränad och muskulös. Han tränar framför allt styrka i överkroppen och uthållighet och träningen innehåller manliga element som fart och kraft. Den ohälsosamma mannen är inaktiv och misslyckas därmed med att vara en man.Den hälsosamma kvinnan är smal och vältränad.
Med minskad komplexitet får ett system ökad användbarhet Fallstudie av användbarhet i ett affärssystem
One of our reasons is that we think the subject usability is interesting, is that we think it is an important. Usability is maybe the most important element when you develop or choose a system because it can save money for the companies and give the users a more delightful and better work environment. The aim of the investigation is to find out if the implementation of a web portal is a direction to reach higher usability in a complex system that consists of several different interacting applications. The objective of our investigation is to show if the implementation of a web portal is a direction to reach higher usability in a complex system that consists of several different interacting applications. In our case we will try to see if Karlshamns AB:s recently implemented web portal is more useful than their previous application (Movex with interacting programs) One thought with the report is to give the system developers a perspective of how the usability can be in-house made applications versus standard applications.
Att verka inom ramarna : En studie i syfte att jämföra en organisations riskarbete med COSO:s : riskhanteringsramverk samt Enterprise Risk Management
Den omgivning organisationer idag ställs inför blir alltmer krävande. En allt hårdare reglering, hot från nya teknologier, samt de företagsskandaler som härjat i media, har lett till att dagens organisationer ser på risk på ett nytt sätt. En utveckling som nyligen skett inom riskhantering är Enterprise Risk Management (ERM). Denna uppsats undersöker den roll ERM, och i synnerhet ett nyutvecklat ramverk som används för att implementera ERM, har i en organisations riskarbete. Ramverket, COSO:s ERM, består av åtta kontrollpunkter som enligt ramverket bör finnas i en organisation som utför sitt ERM-arbete på ett korrekt sätt.Studiens syfte är att undersöka likheter och olikheter mellan en organisations riskarbete och COSO:s riskhanteringsramverk samt den teoribildning som skapats kring Enterprise Risk Management.
Utveckling och utförande av frekvensstudie vid Rapid Granulator AB
The object of this examination project is to produce a method of work sampling at Rapid Granulator AB. The aim is to perform the method at the company and evaluate if it is executable. The study is delimited to the basic construction of the 45-series in the assembly hall.Preparations to produce the method of the work sampling resulted in definitions of activities, a form and a product tree. Several days were spent studying the assembling to learn and understand the entirety.The work sampling result showed a large amount of no value adding time that was used in the assembling. Some of the activities could be reduced and we observed some problems during the assembly process.