With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic Fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic Fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

In this study, the effects of using fine milled cassava stems as an additive in biofuel pellet production was compared to the effects of refined starch addition. The bulk biomass fuel raw material, to which the additive was added, was a blend of spruce and pine sawdust. An experimental design in the factors cassava/starch content, moisture content and material temperature was used. Measured responses were pellet bulk density, pellet durability, amount of Fines, pelletizer motor current, pellet temperature, die temperature and CV for pelletizer motor current (a measure of process stability). Each response was modeled by multiple linear regression (MLR).

One of the most serious and economically important defects caused by clostridia in milk products is the late blowing of semi-hard cheeses.Clostridia occur naturally in soil and can contaminate milk through crops contaminated by dung and soil followed by a less successful silage process, that give them opportunity to grow unaerobically. When anaerobic conditions occur, such as storage of semi-hard cheese, they ferment lactic acid to butyric acid and the gases CO2 and H2.At the fusion of Arla and MD Foods, a series of changes were conducted on the MPN method for lactic acid fermentation for clostridia in milk. These changes resulted in an increased accuracy due to an increased number of test tubes and the change of media from MRCM to BBB, Bryant & Burkey Broth, that was thought to be more selective for Cl. tyrobutyricum, the organism mostly found in hard cheese. When the number of dairy farmers that were given quality reduction Fines increased, the new method was suspected and a validation was conducted.The validation included inoculation of different clostridia and bacillus strains into BBB substrate and enzymatic testing of positive samples with Rapid ID 32A.

The purpose of the thesis is to illustrate how payments of damages between companies are treated from a taxation point of view, and to analyse, in a tax law perspective, the consequences that follow the transactions. Furthermore, a comparison is made between damages and transactions similar to damages, such as amicable settlements and Fines between companies, to ascertain whether they are treated similar. Finally, there is an analysis of the consequences of taxation of insurances, both premiums and compensations, followed by a comparison with the consequences of taxation of damages..

The aim of the study was to investigate the crimes and punishments that were commonly occurring between the years 1601-1651, and how the distribution was between men and women represented in the court in district Sjuhundra and Njurunda district. To answer these questions, a quantitative examination of court records conducted in which the crimes and punishments have been categorized. The results that have emerged have been the basis for the conclusions issued in the essay. The results showed that the most common target types were various civil and propertycase and the most common punishments were sentenced to Fines and settlements. It was predominantly men who were in the court, the proportion of women was between 13-22%.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

The use of renewable resources is rapidly increasing in Sweden, especially the use of fuel pellets. Through pelletizing the energy content per volume unit is greatly increased and the pellets are more homogeneous with regard to moisture content, particle size and density compared to unrefined fuels like forest residues and chips. For further development of the Swedish pellet industry, the use of different assortments from lodgepole pine (Pinus contorta Dougl. var. latifolia) is of particular interest, mainly because of its high volume production.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

During the timber floating era, most of Sweden?s watercourses were altered. This decreased the amount of available spawning habitats for salmonids, and hence had a negative effect on the riverine brown trout (Salmo trutta) populations. Reconstruction of spawning grounds is today a common measure in restoration of altered streams in Sweden. However, very little evaluation of the effectiveness of these reconstructed spawning grounds exists.

The purpose of this essay is to examine and explain how the Swedish mining court of Stora Kopparberget (the Great Copper Mountain) implemented its judicial legislation between 1641-1682. Questions are asked about which counts of indictments the court tried, which sentences they handed out, in what quantities and how these results looks in comparison with other contemporary courts. The index cards of the court judicial protocols are the primary source of information. The methods are those of quantity- and comparative analysis.The results show that theft of copper ore was the most common crime ransacked by the court. Other common crimes were (in order): sin of omission, transgression of work directions, fights, slander and disdain, trade of stolen ore, failing appearance in court etc.Fines were by far the most common sentence followed by shorter imprisonments, gauntlets, loss of right to mine possession, twig beating, loss of work, penal servitude, banishment, ?wooden horse riding? and finally military transcription.

Background and problem: In March 15, 2009, the third piece of money laundering directive was introduced which mean a more strict legislation in control against money laundering and terrorist financing. The directive is based on a risk based point of view which means that the resources should be used where the needs are. The responsibility for financial companies and other parts are bigger then before which means that they have to get a more extensive customer knowledge etc. It has however been appeared that the directive in some cases lack of precision and clarity which creates an insecurity among those who are included by the law. Purpose: The purpose of this paper is to examine which consequences the third piece of money laundering will bring on the banks customer relationships and how the employees work assignments at the banks will be affected. The authors also want to examine how the extension of money laundering will be affected and clarify if there is any indistinctness about how the application looks around the banks.Method: The authors choose to use a qualitative method and the empiric material has been collected through personal meetings, telephone interviews and through e-mail answers. Conclusion: The majority sees the third piece of money laundering directive as something positive which will protect both the banks and their customers.

LKAB är ett järnförädlingsföretag som är helägt av svenska staten. Produkter som tillverkas är Fines och pellets, dessa innehåller järnmineralen hematit och magnetit. Efterfrågan av järnmalmsprodukter är dagsläget mycket god och LKAB arbetar ständigt för att öka produktionen och samtidigt bevara en god kvalitet på produkterna. LKAB bryter malmen i sina gruvor i Malmberget och Kiruna, malmen avskilja från gråberg i sovrings- och anrikningsverk därefter sker addering av tillsatsmedel i anriknings- och kulsinterverk. I kulsinterverket tillverkas slutligen pellets genom att råkulor rullas i rulltrummor och därefter torkas på graten (galler rostern).

The aim of this study was to investigate and analyze similarities and differences in trials and punishment from a gender perspective, during the inquisition in the episcopate of Linköping. A inquisition initiated by duke Karl but performed by archbishop Abraham Angermannus in the year 1596.During the working process a quantitive method was used in the purpose of getting statistic data considering number of men and women that were trialed and punished. A hermeneutic qualitive method was also used in the purpose of closer investigating certain cases that men and women were involved in. The theoretical concepts that have been of importance and used in this study are the individual and the female subject that is based on gender in judicial procedures.The results showed that 49 % of the men were trialed for quarrel. Not as many men were trialed for contempt towards the church and witchery.The most frequently used corporal punishment in this cases were flogging that were executed for totally 38 % of the men.The investigation also proved that men were punished with these forms of corporal punishments for showing their contempt towards the church.