Ten cows suffering from displacement of abomasum (DA) were treated with two different electrolytesolutions. The DA cows showed symptoms typical for the disease. Four out of 10 cows had a metabolic alkalosis and two a metabolic acidosis. The cows were mildly hypocalcemic, and 9 out of 10 were mildly to moderately hypokalemic. Six out of 10 cows showed muscle fasciculations.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

The purpose of this Master Thesis has been to investigate the possibilities for a new type of noise reduction solution that could decrease the negative effects resulting from larger traffic roads. The idea has been to construct a noise barrier with a roof ? like a tunnel placed on a road. The choice of material has been focused on transparent materials in order to lower visual intrusion and barrier effects. This project idea is called the Noise tunnel.After having investigated the current offer of noise solutions, it has been concluded that these solutions rarely provide a sufficient level of noise reduction ? at least not when government regulations of acceptable noise levels are applied.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This reportcommunicates the processes and results of my degree work in industrial design at candidate level at Umeå Institute of Design.During my degree work I had a cooperation with Svenska Jägareförbundet (Swedish Hunters Assosiation).The aim for my project has been to explore how I could make hunting a safer hobby and undertaking. Every year people get seriously injured and in average 2 people a year dies  due to hunting accidents. My goal is to identify problems within the hunters communication and approach. Through a creative design process I will find a valid  nd realistic solution to these problems. My project will be presented as a conceptual solution  hat will be based on currently existing technology.

This report is an attempt to clarify how religious and non-religious views-of-life [livsåskådningar] are created through the collaboration and opposition of religious and scientific elements/ideas. This with the hope of reaching a fruitful result related to the solution of world-view related conflicts, such as the ones existing between science and religion, on an individual and societal level.This is accomplished with the help of two assertions: (1) Mankind has a need to explain its existence and surroundings. (2) Religion and science has their origins in the same seed and aim to serve the same purpose, or function. Together these two assertions lay the theoretical foundations of this report which implies that all humans have an innate need of sustaining a stable world-view.The result of this report is that a final solution to world-view related conflicts are beyond reach as our mental and physical nature limits us. However there are strategies for minimizing world-view related conflicts effect on society..

Investors have been shown to be driven by emotional and psychological factors. This contradicts classical financial theories, for example the Efficient Market hypothesis which states that all investors act rationally. Behavioural Finance is an area of study which describes various psychological factors which may result in irrational investor behaviour.The primary question of the study is: which factors do operating people in the financial sector consider themselves to be influenced by? The purpose of this study is to investigate the factors which affect the process of creating forecasts or making financial decisions. The study examines in addition if there is a correlation between length of investor experience and overconfidence in forecasting accuracy and investment decision making.The study includes both quantitative and qualitative analysis.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Title: The mortgage limitation and its impact on the mortgage marketLevel: Final assignment for Bachelor Degree in Business AdministrationAuthor: Mattias Arnkvist and Magnus Vitasp PerssonSupervisor: Lars SteinerDate: 2011 ? MayAim: We have conducted this report to find out what effect the mortgage limitation has had on the mortgage market since its introduction in autumn 2010. The mortgage limitation has both before and after the introduction been a topic of discussion as it affects many and above all makes it diffucult for certain customer groups.Method: This report was written by a qualitative method. The report uses qualitative and quantitative data. The quantitative data we have in the report are printed literature in books, articles and journals as well as data taken from Internet.

There is an increased pressure for firms to provide the financial market with additional information. Such disclosure is attached with different kinds of costs. In spite of these costs, and in spite of increased mandatory disclosures, firms choose to voluntary disclosure financial information to analysts and others. This indicates that firms also benefit from providing additional information. The subjects of this study is 431 annual reports from firms listed at the Stockholm Stock Exchange for 2002 and 2005 and the objective is to survey factors that can explain variations in firms? voluntary disclosure.

Abstract: The aim of this study is to investigate the attitudes towards the labour movement?s strategies, goals and organisational issues in Swedish Miners? Union?s (Gruvindustriarbetareförbundet, hereafter Gruv) paper, Gruvarbetaren 1917-1925.The theoretical starting point is Engels? view on the class state. This perspective turns the question of socialism and the way to get there into an issue of working class power over the state. Another theoretical perspective is the partition of the labour movement into a trade-unionistic branch, seeing unions as financial organisations of interest, and a pro-state one, considering unions as political organisations.During the period investigated Gruvarbetaren was quite radical and advocated a firm class struggle strategy towards employers. Since these were considered unreliable, class struggle was seen as the only way to better the conditions for the working class.

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

Fallstudien baseras på ett samarbete med Ericsson Operating Expenses Financial Control och syftar till att belysa förväntningar, förväntningsgap och bakomliggande osäkerheter i samband med ett förändrat arbetssätt. OPEX Financial Control är en supportverksamhet som tillhandahåller tjänster vad gäller uppföljning av omkostnader till ett antal affärsenheter och övriga verksamheter inom Ericsson. I ett under hösten 2005 pågående pilotprojekt prövas ett nytt arbetssätt som innebär att linjecheferna tar ett ökat finansiellt ansvar för sin egen omkostnadsuppföljning. Detta medför att ett nytt verktyg och nya rutiner prövas. Studien utgår ifrån intervjuer med fem controllers, varav fyra representerar enheten OPEX Financial Control, samt fem linjechefer.