This Master of Science thesis is conducted at the faculty Integrated Product Development at theRoyal Institute of Technology and in cooperation with EssNet Interactive AB, both situated inStockholm. In the report the final results and the road to get there is described as well as thedesign process and how the process is used to obtain the goal of this thesis.The author of this thesis has developed the design and the function of an interactive videoterminal (IVT) and by using semantics created an encouraging gaming design. The projectspurpose was to change the anonymous withheld shape and produce an experience of gamingmachine that has been absent. The work was aimed to answer the question: How does oneproceed to develop the IVT and by using semantics creating an understanding of gamingmachine?In general the author wants to show that small changes, with the help of design and its signals,can completely change the overall picture of a product.

This is a final thesis for the Master?s Programme in Landscape Architecture at the Faculty of Landscape Planning, Horticulture and Agricultural Science. The subject of the thesis is the outdoor environment of children in Hebron.The thesis aim is to investigate children?s basic needs and desires in their outdoor environment, and how these can be met in the design of a site in Hebron. A starting point for thesis is that children?s environments in the city should not be separated from city life in general, so that children and adults can meet in the city outdoor environment.The ongoing political conflict between Israel and Palestine is presented in the thesis by describing its consequences for the city of Hebron and the lives of its residents, with a particular focus on the everyday lives of Hebron children.

AbstractThis qualitative study has been made to examine which factors that are required to create a work place that can be associated with loyal co-workers. The study covers half structured interviews with nine people on different levels and with different positions, within a manufacturing company in Värmland. Our ambition with this study is to find out if, and if so, in what way the view on loyalty and which factors that are required to encourage loyalty, differ depending on witch level one belongs to in the organization. Our thesis is that our respondents will have various ways of expressing the term loyalty, and that these various ways are linked to the different levels that each employee is currently stationed at.The result of this study shows that the way people look at loyalty, and what loyalty is really about, does not differ that much among our respondents, regardless of their level. The factors that, according to the respondents, are important if one wants to create a work place that can be associated with loyal co-workers are: to be able to feel trust towards and have faith in those one works with, as well as the company and the way things are being run, to be able to experience the feeling of community, and that one is happy with ones work place, as well as ones co-workers.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

The purpose of this study has been to examine how customers, by interacting with each other, can communicate and create the image of a brand. We find this topic to be relevant since there are no previous studies conducted concerning the customers influence on the brand image. Our ambition has been to describe in what ways and to what extent the customer can affect and influence the brand image by communicating with other customers. To fulfill our purposed we have targeted three important questions which are:? In which ways can the customer affect the communicated image of a brand?? To what extent can the customer influence the brand image and the perceived value?? Who has control over the brand, the customer or the company?For this study we have used a qualitative approach in which we have conducted eight personal interviews with brand consultants and the editor of the magazine Dagens Media which has given us the foundation for our analysis.

This graduation thesis aims to give a survey of how cultural property is protected withininternational law and how these protections worked during the conflicts in the formerYugoslavia and later at the International Tribunal for the former Yugoslavia, ICTY.Cultural heritage is important symbols for ethnicity, religion or political views. Because ofthis cultural property has been targeted in armed conflicts as long as can beremembered. The protection of cultural property within international law has developedfrom the midst of the 19th century up til today and is still developing towards strongerprotection. One of the latest armed conflicts where the cultural property became targetedwas the wars in Yugoslavia in the 1990?s.

Laws and regulations govern the school kitchens in Sweden. The municipality controls how well the school kitchens obey those laws. An annual fee covers the municipality?s expenses for the public control of the school kitchens. To be able to calculate this annual fee, a risk evaluation needs to be done.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

Every year, pesticides are found in surface and ground waters in Sweden. Fungicides are in common usage and applied in high amounts against potato late blight. The present thesis examined the possible removal of four fungicides (metalaxyl, cyprodinil, propamocarb and mandipropamid) from water using the microalgae Chlorella vulgaris. Microorganisms are capable of decomposing a range of organic pollutants and the main focus in previously published studies has been on bacteria and fungi. Microalgae are mostly studied due to their high capacity in biosorbing heavy metals.

Background: Students, at a secondary upper school, attending a practical programme have a lower physical capacity than students from theoretical programs. Our physical self-esteem has a great significance for our motivation in being physically active and thereby also for our health. The purpose: of this study is to find out if there is a difference between perceived physical self-esteem and objectively measured physical activity between students attending a practical programme and a theoretical programme. Method: Four classes, in a medium-sized town in the southeast of Sweden, participated in the study, two classes from practical programmes and two classes from theoretical programmes. All the students were in their final year at the upper secondary school, when they were part of the study during the autumn of 2011.

The real estate industry is a sector where the companies generally have a capital structure which is high leveraged. The financing? with the related terms ? is therefore specifically of high importance for the companies in the sector. Traditionally, the way of obtain financing is by borrowing from the bank. Lately, due to new bank regulations, the banks have become more restrictive in their lending which have lead to a growth of other financing alternatives.

The aim of our study is to ascertain whether a hanging suspension fluorescentlamp for a private home environment is going to be attractive for a largeaudience. We want to open up for new uses of fluorescent lamps as lightsources.The main approach in this work is how to design a fixture with fluorescentlamps as a light source that will meet the requirements and requests of thehome environment could look like. At the same time we want to make a newimpression of how a fluorescent light source.Primarily we used a quantitative method, but this was rejected after a pilotstudy. Instead we used a qualitatively based method in the sense that weconducted a group interview as well as individual interviews.Based on data from the interviews and our preliminary work a prototype wasbuilt. This prototype is a fluorescent fixture equipped with 2x14W T5fluorescent lamps, dimmed separately.

This report is written in cooperation with the Swedish National Road Administration South-Eastern Region in Jönköping. The report is a result of the evaluation to give an answer to the question about how well the function contract has been carried out on the E4 in Östergötlands and Jönköpings län. The evaluation is divided in two hard parameters and one soft.The Swedish National Road Administration is interested in knowing how the standard on the road have been changed during the functions period, which is the reason why the first hard parameter is considering road standard. To evaluate the standard there have been a comparison of values from measures taken every year on the current road stretch. The second hard parameter considers economy.

Today's consumer society has led to never-ending choices in terms of brands, products and prices in an endless variety of shops. The retail industry is a very complex industry that includes many different types of sales channels and many different types of products. A consequence of this trend is that brand owners today face difficulties in understanding how their products are being evaluated and difficulties in knowing which final cause that make a consumer willing to by their product is hard to figure out. The industry is very diversified, which means that for a company to really understand their position and their role on the market it requires that the company put a lot of effort and also a lot of money in the process of trying to figure it out. We will with this paper try to explain a small piece of that understanding and we hope to get results, which contribute to the further research in this area.