Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..

The purpose of the study is to examine how the teachers in second grade use SMART Board and compare two schools.The process I used was qualitative interviews and classrooms observations. Previous studies shows how widely SMART Board is used in classrooms, and this has also been shown in my study. The study shows how differently SMART Board is used in the classrooms, and how important education in the technology of SMART Board is to achieve in the classroom. The final discussion clearly shows similarities and differences in the use of SMART Board in different classrooms and also the teachers? thoughts about SMART Board as a tool.A central aspect in the use of SMART Board shows how important the basic education in SMART Board is.

This master?s thesis report is a summary of the analysis performed together with ITAB Shop Concept located in Jönköping, Sweden. As a last element of the Master?s program at the School of Engineering, this 20 point level D thesis project has been the final work to bring my education to an end.ITAB Shop Concept expressed an aspiration that the Shop Counter Program B10/B11 should undergo an analysis to point out and possibly lead to improvement.Through interviews and data collection proposals for possible improvements has been drawn up and the analysis points out current deficiencies. By following the idea generation, proposals to solutions for every individual problem is presented.

Marks do not only work as an acknowledge of the effort that has been made under a long period of time, but also as a receipt for eligibility to further studies. Within the political debate, marks have often caused a big discussion among the political parties. That is due to the obvious difference between the political parties on the left, and their counterparts on the right. However, there is one thing that they all have in common. Everyone of them have plans of measure within their political agenda, regarding the use of marks.The aim of this study has been to try to understand the way pupils think about marks.

During the autumn of 2007 I attended a course in plantcomposition in Alnarp. The main task during the coursewas to make a proposal for a theme garden that was goingto represent the school at an exhibition in the GardenSociety in Göteborg, during the summer of 2008. Thetheme for the garden was set to ?sustainable development?and we had fully two weeks to work with the proposal.I won the competition and during the spring andsummer of 2008 I developed and realized my idea. Thegarden exhibition was inaugurated the 28th of June andwas open until the 28th of September.

The purpose of this thesis was to create a saw pattern program for the sawmill industry. I have chosen to focus on the module that describes the shrinking on the wood. There are several theories about how the wood deforms by shrinking. Several hypotheses were simulated in the program and after testing them I decided to use only one of them (hypothesis C). The program is written in Visual Basic .NET and I choused that program language because it is easy to do changes in the layout. Another great advantage in Visual .Net is that you can mix different languages in the same program.

The essay aims to show n interpretation of Vampyr and Ordet; seen from a viewpoint Kierkegaards christian existentialism can enhance the understanding of mentioned movies. Central notions from Ks philosophy are explained and then the author points to examples of how this corresponds with the essence of the two movies.The argumentation is based on Ks thoughts on faith and human existence. Other theories concerning Dreyers movies, and to some extent his background, is also discussed.Finally the author concludes that he was right in his hypothesis: that it is possible to show an influence from Kierkegaards christian, existentialistic thoughts in the two movies.Moreover the author thinks that the chosen perspective works as a complement to other written material on the movies and that other writers on the subject have some problems summing up the contents of the movies from their different perspectives.The final conclusion is thus that an interpretation of the movies from a Kierkegaardian viewpoint increases the understanding of the same movies..

The essay aims to show n interpretation of Vampyr and Ordet; seen from a viewpoint Kierkegaards christian existentialism can enhance the understanding of mentioned movies. Central notions from Ks philosophy are explained and then the author points to examples of how this corresponds with the essence of the two movies.The argumentation is based on Ks thoughts on faith and human existence. Other theories concerning Dreyers movies, and to some extent his background, is also discussed.Finally the author concludes that he was right in his hypothesis: that it is possible to show an influence from Kierkegaards christian, existentialistic thoughts in the two movies.Moreover the author thinks that the chosen perspective works as a complement to other written material on the movies and that other writers on the subject have some problems summing up the contents of the movies from their different perspectives.The final conclusion is thus that an interpretation of the movies from a Kierkegaardian viewpoint increases the understanding of the same movies.

Landfill leachate contains a variety of contaminants and is created when rainwater percolates the landfill. For landfill management the leachate is the main issue that can cause problems to the environment. At the landfill of Fläskebo, Renova AB treats the leachate in a local treatment plant. The treatment consists of a chemical treatment step with chemical precipitation, flocculation, sedimentation and filtration, and a final step with a carbon and peat filter. Renova has to ensure that the condition of the leachate reaches the regulation set for the landfill before it is released to the recipient.

In this master thesis, the possibilities of customizing a low-cost microprocessor with the purpose of replacing an existing microprocessor solution are investigated. A brief survey of suitable processors is carried out wherein a replacement is chosen. The replacement processor is then analyzed and extended with accelerators in order to match set requirements.The result is a port of the processor Lattice Mico32 for the FPGA curcuit Xilinx Virtex-5 which replaces an earlier solution using Xilinx MicroBlaze. To reach the set requirements, accelerators for floating point arithmetics and FIR filtering have been developed. The toolchain for the processor has been modified to support the addition of accelerated floating point arithmetics.A final evaluation of the presented solution shows that it fulfills the set requirements and constitutes a functional replacement for the previous solution..

This is a report that goes through the design process of designing and illustrating a virtual clothing shop with the theme ?Stockholm Streetstyle? for the website ?Stardoll.com?. The purpose of the report is to examine how you can manage to get as close to designing a certain style or theme as possible, and also how the process of designing a clothing line can work, The illustrations were made in Adobe Illustrator and the final result of the project was an illustrated fashion collection with 21 parts, in the total of 6 outfits, and also a background for the shop. .

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

In the middle of the 19th century was Calluna heath the major nature type in Halland, but the remaining parts today is only 1 500 hectares which is a 99 % decrease of the Calluna heath mainly due to an increase in forest plantations and arable fields. I have made a quantitative study how the Calluna heath of Grönabur & Sandsjöbacka has changed between 1841 and 2005 and why it didn?t disappear in the same manner, as it did in other parts of Halland. The studying of original sources as historical maps, literature and by doing field visits has been significant for the final result. The main reason for the different development of the Calluna heath in the investigation area (69 % decrease), compare to elsewhere in Halland, is the establishment and management of a nature reserve..

The purpose of this paper was to examine how people experience the practice of Cannabis in daily life. The study was based on interviews with five individuals who have experience with cannabis use. They do not represent a bigger population only themselves. We chose these particular individuals because all of them began using cannabis at a young age- everyone before they were twenty. But they have been using cannabis because of different reasons.

This thesis has been performed at BAE Systems Hägglunds, which is located in Örnsköldsvik. Hägglunds has a wide background of engineering, where they have manufactured all from airplanes to lifting cranes. Currently they only produce track vehicles at Hägglunds, where they manufacture the CV90 and BVS10 models. This thesis concerns the BVS10 which is an all-terrain-vehicle. The main purpose with the BVS10 is to enable transportation of material and personnel thru tough terrain.