In a world where digital media is becoming a greater part of people?s everyday and working lives it is plausible to assume that the upcoming generation of pupils expect the teaching media to adapt thereafter. It is this assumption of an increased demand that Natur & Kultur is hoping to be able to meet. This thesis has been a stage in the process of producing digital material in the subject of mathematics for high school students. Specifically the aims of this thesis have been to make a rough description of the largest competitive companies? products within the same market, explore and put together a brief theoretical foundation of contemporary research and produce concrete examples of ideas for digital applications.

The students are usually eager to develop their mathematical learning. However, the Skolverket can see that this eagerness passes in the early years of school. A study shows that a varied mathematical education creates enthusiasm to learn, which can decrease the negative view of mathematics.The purpose of this study is to see how five pedagogues use laboratory mathematics, their approaches to laboratory mathematics as well as to find out their role in the laboratory education. The result of the study is based on interviews with the pedagogues, who are all teachers for students in year F-3. All of the pedagogues work in a laboratory way, but to different extents.The study shows that the pedagogues aim to make the mathematics as concrete and everyday as possible.

At the beginning of 2011, Sweden started using the European rules for structural design, the Eurocodes, instead of the previous national rules. In both the previous rules and the Eurocodes, it is possible to dimension concrete columns using tabled values. However, the required cross section measurements have increased considerably. Moreover, it is possible to dimension concrete columns using calculations, however, this is unusual.The development of a fire in a fire cell can be divided into the growth stage, the fully developed fire and the cooling phase. The duration of each phase, as well as the temperature, is dependent on a number of factors, e.g.

Concrete is one of the world?s most common construction materials and is composed of 70-80 % stone material. Today crushed stone is used as aggregate in concrete in order to replace natural aggregates due to strong environmental reasons. Stone crushing yields flaky material and in this thesis studies are made on the flaky particle shape and how it influence properties of concrete such as workability, rheology and strength. The concrete recipes used in this thesis have fixed values, the only variable is the flakiness of the crushed stone.

This report describes the building of a computer model that makes it possible to simulate the thermal climate in a greenhouse. The computer model is built on the physical theory of heat exchange that occur in a greenhouse, such as radiation and convective heat exchange. The model also includes the heat storage that is active in a greenhouse.The computer model is used to simulate the thermal climate in a greenhouse under three periods, winter, spring and summer. It also investigates which effect a concrete wall has on the thermal climate in a greenhouse. The purpose of putting a concrete wall in the greenhouse model is to investigate the possibility to store heat during the day and then use this heat when the temperature drops during the night.The result from the simulations shows that a concrete wall levels the big difference in temperature that normally occurs under a day in a greenhouse.

The school inspectorate surveys illustrates problems and difficulties for teachers to suit individualized instruction. Therefore, the purpose of the study to investigate whether and in what ways some pedagogues experiences and practice offers the individualized instruction that the governing documents require. The study is based on a qualitative method in the form of semi-structured interviews and observations with four experienced pedagogues. I have been using Piaget's theory of the concrete material's importance for learning and also Vygotsky's theory of the proximal development zone. The results showed that pedagogues understand the importance of individualized instruction.

Cement manufacture accounts for 3-5 percent of total global carbon emissions. There is a growing interest in reducing the environmental impact and conserve limited natural resources. In cement production, clinker productions consume 87.5 percent of the total energy consumed in the cement manufacture.Cementa has since many years, focused on reducing the environmental impact of cement production. The work has involved the entire production process from selection of alternative fuels to the development of cement with less clinker content. During 2013/2014, two new types of cement (Bascement and CEM II / B) will be introduced to the Swedish market.

This thesis has examined the Tekla Structures modeling software and answered the question of whether it could act as a suitable modeling program for the design department at Bjerking AB in Uppsala. The method used in this work is a case study of a previous project with existing basis to work form. The demarcation of the study was to examine only the usability of the foundations of in situ concrete. The work examined three main areas within the design process. The first was to model the concrete elements then to model the reinforcing and ultimately production of the drawings. Because Autodesk Revit was the existing modeling program in the Department conducted the evaluation as a comparison between the two programs.

This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

The incidence of damage to the claws and legs in piglets caused by the floor in farrowing pens is a widely known problem and very common in today's pig herds. Although the association between floor and damage has been known for over 35 years, no suitable solution has been found to reduce the negative impact. The purpose of this study was to make a literature study to document the experiences of the use of different types of flooring in farrowing pens and also, in an own study, examine if soft floor in farrowing crates could lead to reduced damage to the claws and legs in piglets compared to concrete floor. The study was conducted in two herds, A and B. In each herd, farrowing pens with concrete floor and concrete floor with polyurethane coating were compared.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

?Childs pedagogic material ? A qualitative study of child?s use of pedagogic materials available at five nursery schools and about their teachers thoughts about the display of the pedagogic material?In the nursery preschool the environment and the educational materials have always had a central place. That's why it has been chosen to study and observe five preschools and interview sex teachers, in an attempt to understand the teachers thought about the choice of material and the choices of material that the children used. The reason I do this is to see what the underlying idea about the materials the children use is, and why educators choose to make certain materials visible. The purpose of this study is to examine the educational materials that are used to stimulate children´s learning and examine what determines the choice of educational materials.

The purpose of this Master's thesis is to find possible explanations of variation in light scattering in a fine paper. Samples were collected from each second tambour during a time period of two weeks from a paper machine at MoDo Paper, Husum. Two data sets, consisting of 20 and 95 observations, were selected for extensive analysises of tensile and structual properties. The data was evaluated with multivariate data techniques using the programs Simca and Extract. The results of PCA- and PLS- analysises pointed out 3 of 52 variables as important for the variations in light scattering.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..