This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Denna rapport handlar om att använda en trådlös kommunikationsteknik som kallas NFC (Near Field Communication) vid kommunikation mellan en Android mobiltelefon och en NFC-läsare som kallas ACR122U. Syftet med detta projekt är att:Välja en Androidtelefon som har stöd för NFC.Skapa en applikation som skall köras på Androidtelefonen och som skall skicka ett lösenord via NFC.Skapa ett program som skall köras på en dator med operativsystemet Windows 7 och som skall hantera ACR122U.Förklara den insamlade kunskapen i detta dokument så andra lättare skall kunna arbeta med NFC.Följande frågor kommer att besvaras i denna rapport:Vilken Androidtelefon bör användas vid utveckling av en applikation som kan kommunicera via NFC?Vad krävs vid utveckling av en applikation som kan kommunicera via NFC?Aktionsforskning är den forskningsmetod som användes vid sökandet efter svar på frågorna ovan. Detta innebär att forskningen görs genom att läsa om ämnet, genomföra en eller flera lösningar för att hitta en fungerande lösning och sedan dokumentera resultaten. Implementeringen av programvaran på mobiltelefonen genomfördes med mycket hjälp från Android Developers hemsida.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

Burkina Faso as well as most sub-Saharan African countries struggle with providing food for a fast growing population. The dominating farming system is agroforestry parklands. Agroforestry parklands can broadly be defined as areas where scattered trees occur on farmlands as a result of selective clearing. The presence of trees in crop fields may in the long term have a positive effect on the production of annual crops. It is commonly discussed, but not proven, that the presence of trees leads to increased groundwater recharge due to higher infiltration capacity of the soil.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

I föreliggande single subject designstudie har tre personer med thai som modersmål och svenska som andraspråk tränats specifikt i svenskt uttal. Syftet med föreliggande studie var därför att utforma samt genomföra en uttalsintervention vilken delades in i en suprasegmentell och en segmentell modul. Syftet var vidare att undersöka hur suprasegmentella och segmentella förändringar i uttalet påverkade uttalets förståelighet. Uttalsträningen utfördes 14 gånger under en fem-veckors period. Interventionen delades upp i två moduler, en med suprasegmentellt fokus (B1) och en med segmentellt fokus (B2).

This thesis is an evaluation of a new design concept for statorfeets in Gallejaur hydro power plant. Founder of the work is Vattenfall AB Vattenkraft. During the 70- and 80´s nuclear power began to be phased in to the Swedish grid, which meant that hydropower became an important source of rules. The generators began running in so called intermittent operations instead of basic operations, which meant 300-600 start/stop per year instead of one-ten numbers start/stop per year. In order to deal with the thermal forces that arise at every start and stop suppliers began to mount so called sliding joints, which is to take advantage of these forces and maintain the stator shape.

The number of weaned piglets per sow and year is a good measurement of sow productivity since it is affected by the number of piglets born alive, the pre weaning mortality (i.e. mortality of live born piglets between birth and weaning) and the number of litters per sow and year. This measure is also closely connected to the number of piglets produced per year, which partly determines the profitability of the piglet producer. During this study, eleven successful piglet-producing herds were visited. Eight of the producers were Swedish and three of the producers were Danish.

According to a decision of the European Commission, measures are to be taken to reduce the use of energy in the EU. The goal is to reduce it by 20 % compared to the current use. This shall be done to the year 2020 (European Commission, 2011). One industry that use large amounts of energy is the construction of buildings which account for almost a third of the energy use (Brogren, 2012). The major part of the energy that is used in the construction industry is not used when the buildings are built, but rather during the rest of their subsequent lifetime.

När en grupp utvecklare jobbar med samma kodbas kan konflikter uppstå med avseende på implementationen av moduler eller delsystem som varje utvecklare individuellt jobbar på. Dessa konflikter måste snabbt lösas för att projektet ska fortskrida och inte stagnera. Utvecklare som sällan kommunicerar framför ofta okompatibla moduler eller delsystem som kan vara svåra eller omöjliga att integrera i kodbasen, detta leder ofta till s.k. ?integration hell? där det kan ta väldigt lång tid att anpassa ny kod till en befintlig kodbas. En strategi som man kan ta till är ?continuous integration?, ett arbetssätt som erbjuder en rad fördelar när man jobbar i grupp på en gemensam kodbas.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.