The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

The objective of this thesis was to get more knowledge about how to design a dairy farm reducing the working hours and the work tasks whit high work load. I will try to reduce the working hours and the tasks whit high work load on my own farm witch I am about inherit. Today, the old stanchion barn has room for about 60 cows and 74 young cattle and need two men to run it every day. The total acre is 188 hectare, 100 hectare forest, 65 hectare farmlands and 23 hectare natural pasture. I have studied two solutions. In the first solution, I will use my old barn for young cattle and build a new barn for the cows.

Today a trend can be seen towards fewer dairy farms and increasing number of cows per farm. Larger farms set a higher demand of more labour efficient milking systems. The time to enter and exit milking rotary platforms is crucial to maintain a high cow throughput. This study is a project initiated by DeLaval in order to evaluate the cow throughput and cow behaviour during entry and exit in two types of parallel external rotaries with different bail designs. The two rotaries compared were DeLaval parallel rotary PR2100 and PR3100HD.

Recreation leaders on youth recreation centres is a professional category, mostly mentioned in the public conversation when it comes to taxes and youth problems. But what do they really do, what outlook do they have to their task, and finally, how are their daily lives like at work? The stories of twelve people represent the basis of this essay which itself consists of two separate studies. Six professional recreation leaders speak about their view of their own work, based on background, mission, education, ethics and position. The recreation leaders´stories reflect a worksituation with meetings of great significance andimportant standpoints.

As a patient you can find a lot of information concerning health and diseaseson the Internet. Purpose: The purpose of my study is to gain a betterunderstanding of how physicians relate to well-informed patientsfrom the point of doctor's changing role in meeting the patient related to theweb-based patient information. Today's patients are turning increasingly tothe Internet before they visit their doctor, this is due to the electronic healthinformation is available 24 hours a day, 7 days a week while the regulardoctor usually have several weeks of waiting. Problems that can arise with theWeb-based information is that the patient does not have a medical educationto know whether the information is appropriate or not. Method: To explorethese questions, I decided to use both qualitative semi-structured postalquestionnaires and telephone interviews in which the physicians preferreddifferently.

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

This is a two years master?s thesis in Archive, Library and Museum studies, which purpose is to find out what ideas there are about school libraries and to get an idea of how informants interpret the new Education Act, which requires all students to have access to school libraries. Another intention of this paper is to highlight the potential rural-related attitudes of the responents. The study includes the sparsely populated municipality of Krokom and is based on interviews with librarians, the school director, principals and politicians who work there. The theoretical basis for this paper is Loertscher?s model för school libraries and a centerperiphery perspective.

Automatic trimmerhead is an examination project for making an automatic trimmerhead for grass trimmers with the user and functionality in focus. Our perception is that a happy user is a user who can pick up his or her trimmer, use it and put it back to its place when the job is done. It should not be necessary to interrupt work and perform maintenance on the machine just to make it work as promised.The project has been made in collaboration with the company Husqvarna, which is one of the biggest actors dealing with garden machinery on the market. Together we determined the project goal, ?To invent, construct and test a brand new concept for how an automatic trimmerhead can look and function?.At this day there are several different automatic trimmerheads on the market, both semi and fully automatic.

The high feeding value of red clover makes it into an important species in Swedish agriculture. There are three different maturity types grown in Sweden, early, medium late and late. The time for heading, regrowth and winter hardiness is affected by the maturity type, but there can also be other factors that are affected by the maturity type, for instance fiber content. In a greenhouse experiment three red clover varieties of different maturity types were compared; early Titus, middle late SW Nancy and late SW Torun. The features compared were fiber content and differences in development rates.

Syftet var att beskriva omvårdnaden kring nyfödda barns tillmatning på svenska BB-avdelningar, om föreskrifter följdes och om hänsyn togs till eventuell allergihereditet. Metod: Deskriptiv tvärsnittsstudie med kvantitativ ansats Resultat: Av alla nyfödda barn vid 26 barnkliniker i Sverige vecka 26 år 2009 (n=849) tillmatades 18 % . Moderns bröstmjölk gavs till 16% medan 78 % tillmatades med komjölksbaserad modersmjölksersättning. Den vanligaste orsaken till tillmatning av ersättning var att mammans egen mjölkproduktion inte hade kommit igång (24 %). Andra vanligt förekommande anledningar till tillmatning var lågt blodsocker (18 %) samt sugproblem hos barnen (16 %).

This study examines the differences between Bosnia and Herzegovina?s, Montenegro?s and Croatia's tourism development after the Civil War in the 1990s. In particular, this essay is about the town Neum, which is the only Bosnia and Herzegovina destination on the Adriatic, splitting the Croatian coast in two. Through information from books, the internet and interviews I´ve tried to find out why Neum is a special place to visit and how it differs from other destinations on the Adriatic coast. One of the findings is that many are not aware of Bosnia and Herzegovina having a small, but still, part of the Adriatic.

This thesis is intended to review and create a greater understanding for the history and originsof printed scraps from late eighteenth century to the beginning of the twentieth century.A questionnaire survey was sent out to several Swedish museums, containing questionsconcerning their collections, possible exhibits, special difficulties and types of damagesconcerning scraps and their current storage. A visit to the Gothenburg city museum storagewas made to take a closer look at their scrap collection and how they were stored. Thisresearch resulted in an understanding regarding the current situation of printed scraps, whichunfortunately appears to be quite poor and inattentive. These results are presented in the firstchapter.The second chapter describes the history of printed scraps, followed by a chapter presentingrelevant printing techniques and technology. This is followed by various chapters dealing withhow the printed scrap has been used through the ages, history and development of motifs andthe album's significance.

This paper is a study with two different aspects, with a main focus of the match factory in Jönköping. The first aspect is about how the work situation for children looked like in the match factory during the 1900 - century. The children´s work history over time, the children?s workday and life situation on the factory and outside is described in this paper. The second aspect in this paper is about how the pupils learn about their local history in the 3 and 4 grade.

Every day consumers are bombarded with different marketing messages from all possible directions. At the same time consumers starts to actively and consciously avoid these messages. Therefore, marketers have to start thinking outside the box and find new ways to get consumers' attention. One of these methods is called guerilla marketing. The strength of guerilla marketing is its way to be unexpected and unusual.

I have worked with Bergum in different courses on the IntegratedConservation of Built Environments program and I thought it was a veryinteresting subject. This is the main reason why I chosen to write mybachelor paper about Bergum.In 1650s Bergum was situated on the border between Sweden and Norway,because of that it occurred some war conflicts.Today Bergum is a socioeconomic border and is situated in an areabetween the city?s concrete suburb and the countryside.The difference between the city?s concrete suburb and the countryside mayfeel like two different worlds, were the social contact is fractional.With this paper, I will indicate a countryside area on the boundary to the citythrough time and try to survey the building history. I will also try todemonstrate the socioeconomic differences between the areas.I will demonstrate Bergum history from prehistory to present time, were I willdiscuss the agriculture history, Vättlefjäll?s forest history and also thedeforestation and replanting.