Good feeding practices are a basic aspect of good calf health. During the calf's first few months the calf is fed with purchased milk replacer or raw milk straight from the cow. On all farms, it will be a surplus of milk that may not be delivered to the dairy for various reasons. Milk that may not be supplied to the dairy includes colostrum and milk with unnormal properties, including milk from cows suffering from mastitis. This study investigated the possibility of improving the milk by pasteurization in order to secure its use as feed for calves and thereby obtain an improved calf health.

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.

En ökad kostnadseffektivitet i svenska företag är viktigt för att dessa ska kunna bibehålla sin internationella konkurrenskraft. Då el- och andra energipriser förutsägs stiga i framtiden ökar även företagens energikostnader. Genom energieffektivisering kan företag minska sina kostnader utan att förlora konkurrenskraft.Detta arbete har utförts på GETRAG All Wheel Drive AB i Köping och syftar till att kartlägga företagets energianvändning och därigenom lokalisera potentiella möjligheter till energieffektivisering av företagets olika processer. Kartläggningen har haft särskilt fokus på elenergianvändningen då denna står för den största kostnaden bland energislagen. Hänsyn har endast tagits till möjliga besparingar och ingen investeringskostnad för effektiviseringsåtgärderna har beräknats.Kartläggningen har genomförts genom mätningar av elanvändningen på produktionsnivå i kronhjulstillverkningen samt insamling av övergripande mätdata över elanvändningen för övriga stöd- och produktionsprocesser.

Claw diseases are common diseases in modern dairy production. They are painful for the cow and costly for the producer. Differences in the prevalence of claw disease depending on housing system have previously been observed. This raises the question if there are genotype by environment (GxE) interactions for claw diseases in different housing systems. To investigate this claw trimming records for Swedish Red dairy cattle (SR) and Swedish Holstein cows (SH) were retrieved from the Swedish Dairy Association.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

In recent years many cities have seen an increase in bicycle traffic. This is a development that benefits both the environment and the individual cyclist. When the need for bicycle parking is not met several problems arise such as an increase in bicycle thefts, jammed sidewalks and a decreased interest in using bicycles. My aim with this paper has been to answer the question of how to create parking facilities in an urban environment based on cyclists' needs. Through a literature survey, following the method "Trattmodellen" (the funnel model) the question has been answered and divided under the headings cyclist, bike, bicycle racks, bicycle garage and bicycle operators and hosts.

There is an uncertainty in the market for grain forcing the meat/milk producers to review alternative feeds to a larger extent, in order to get control over the feed costs. This has led to that the meat/milk producers need to have a good knowledge regarding how the different feeds influences the animals and which technical equipment to use for handling. For those that produce their own feedmix, there is a need to put interest in new crops and their characteristics to be able to get the knowledge of what is required for their own production. It is beneficial to keep an open dialogue with advisors to be updated in new crops and new technology for feeding. When mixing feed at farm level, the legislation is not very clear since it the target group is large scale mixing plants. We have brought up the most important rules and regulations from the EU parliament Council as well as the ones from the Swedish Board of Agriculture (SJV), regarding feed mixing on farm and factory level. We have studied beans and pea at two different moisture levels, in order to evaluate how the moisture level affects the distribution of particles when milling with a plaitmill and a hammermill.

Denna studie granskar tre länder; Tyskland, Spanien och Danmark, som använt feed-in-tariffs (FIT) under en längre tid för att främja elproduktion från solceller. Granskningen omfattar hur användningen sett ut och förändrats, samt om det resulterat i en ökning av solceller. I granskningen ingår också en genomgång av det nuvarande stödsystemet för solceller i Sverige, huruvida det främjat industrin för solceller och om FIT:s skulle kunna användas i Sverige. Granskningens resultat visar att det är svårt att härleda användningen av en viss sorts stödsystem till en ökning av solceller, då det ofta är många olika incitament som används samtidigt. Dessutom kan utformningen av FIT:s skilja sig så mycket att bara användningen av FIT inte garanterar att mängden solceller kommer öka.

Beef production in Sweden has traditionally been about rearing of dairy calves to slaughter. With reduced number of dairy cows and accordingly less dairy calves for slaughter, there has been a need for new forms of beef production in Sweden. In Västerbotten there are good conditions for beef production with a high feeding level of roughage due to favourable climate. The aim of this thesis is to, through interviews with ten farmers with beef production in Västerbotten, study what and with how much they feed their animals and link the results to production level. The thesis begins with a literature review where the general feeding standards and feeding recommendations for beef cows and growing cattle are examined.

To be a farmer and have suckler cows is a difficult combination especially considering the economy. Because of the increased feed costs, the margins have become tighter. The meat price from beef cattle has increased a little when this text is written (spring, 2008), but not so much that it covers the cost for feed etc. I have a small suckler cow production on approximately 30 cows and 2 bulls plus followers as a part-time business. The herd is tied in the old dairy stable built in the late seventies.

Male piglets have been castrated for centuries to avoid contamination of their meat with boar taint, a strongly unpleasant odour that makes the meat inedible. Today boar taint can be prohib-ited by vaccination against gonadotropin releasing hormone (GnRH) using Improvac®. The aim of this study was to evaluate the efficiency of vaccination on growth performance and behaviour of vaccinated male pigs compared to surgically castrated male pigs. The effect of two feeding regimes, restricted (SLU-norm) and semi ad libitum, was also included in the study. At birth, pigs (n=206) were randomly allocated to the two treatment groups; surgically castrated and vaccination.

This essay is a product of our examination work on candidate level in Interaction Design. The aim in this project was to design a digital wallet integrated into a cellular phone and make it as an electronic payment tool. In our project the goal has been to create a digital wallet not just for payment, but also develop it into a complete digital wallet, replacing visa, membership card, student cards, id card and receipt. Our ambition is to take care of current qualities of today's wallet and improve where it is possible so that can be replaceable with the digital wallet..

The aim of the study was to install a biogas system consisting of three tubular polyethylene biogas digesters at a rural household in Malawi and to evaluate the constructed biogas system with regards to relevant system parameters. The purpose was to evaluate if the technology is a possible solution to reduce deforestation and support Malawi in climate change mitigation and adaptation. The study was carried out in the southern part of Malawi in cooperation with the University of Malawi. Locally available materials were used to construct and install the system. Three different feed materials, cow, goat and a mix of cow and goat manure, were used in order to determine which one was best suited to utilise as a digester substrate. After the installation, measurements of temperature, pH, biogas production, biogas composition and system functionality were made. The results of the study show that a biogas system with tubular polyethylene biogas digesters can be successfully installed at a rural household and that the most suitable feed material is a mix of cow and goat manure.