Sök:

Sökresultat:

462 Uppsatser om Feed wheel - Sida 5 av 31

Kan ät- och liggbås påverka kornas välbefinnande?

The purpose of this literature review was from dairy cows? behaviour and welfare point ofview describe how feed bunk and cubicles in a loose house system should be designed. Todaydairy cows in Sweden and in the world have high demands because of a high milk production,stress and higher risk of being afflicted with diseases. Through selection in breeding the bestquality can be performed, but high demands of the environment for the dairy cow is above allalso important for a good welfare and for a good milk production. Feed bunks and cubiclesare just some parts to be designed in the best way for a good animal welfare.

Proteinkvalitet och biogena aminer i ensilage ? effekt på mjölkkors hälsa & foderintag

The aim of this paper was to explain protein degradation in silage and protein quality and biogenic amines in silage and their effects on the health of the dairy cows. After harvest-ing, the plant proteases degrade the proteins in the plant. The protein degrades to different fractions with different digestibilites in the rumen. Fraction A contains non- protein nitro-gen which is peptides, free amino acids and amines. True protein is in the fraction B and is further divided into three subfractions depending on their solubility.

Drank som proteinkälla till regnbågslax (Onchorhynchus mykiss) :

The objective of the present study was to evaluate distillers? dried grains with solubles (DDGS) as a protein source to rainbow trout (Oncorhynchus mykiss), by studying digestibility and growth measurements. One control diet, totally lacking DDGS, and three test diets were made containing 10 % (low), 31% (medium) and 51 % (high) DDGS respectively on dry matter (DM) basis. The control diet and the test diets were made to be as nutritionally equal as possible. Wheat bran was used to balance the fiber content of the diets.

Täckning av plansilo :

With the increasing costs in concentrate the importance in producing ensilage with a high quality is becoming more and more important. To succeed with this goal it is of importance not only to harvest in the right period, but also to be able to store the ensilage without a decrease in quality and nutrional values. To maintain a good ensilage the covering of the ensilage must be carefully made. An unsuccessful covering causes mould to grow in the ensilage, which both increases the work load and also increases the amount of feed which is wasted. A bigger amount of spoiled feed also increases the risk of feeding spoiled feed to the cattle.

Methane emission from nitrate-treated tannin rich feed for cattle in Vietnam

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.

100 % svenskt foder till mjölkkor :

As for today, a large quantity of protein feeds is imported from other countries to be used in the Swedish dairy production. The main import is soya from Brazil. The soya-production in Brazil results in negative consequences for the natural environment in the area, and the long transport of the feeds requires a lot of energy. The organic dairy production in Sweden is, with the highest probability going to be forced to use 100 % organic feed to the cows in the year 2005, due to new EU-rules. These are some of the causes why there are reasons to look closer at the possibilities to feed Swedish cows with only Swedish feeds. In this study, I have looked at the KRAV-rules for organic feeding, where the goal is feeding with only KRAV-approved feeds.

Broiler production in Zambia - management, growth, diseases and welfare

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

Var det bra så? : En kvalitativ studie om arbetsrotation och lärande i ICA-butiker

Denna studie görs inom det arbetslivspedagogiska fältet och behandlar arbetsrotation på ICA-butiker. Syftet är att undersöka hur arbetsrotation sker hos medarbetare inom olika ICA-butiker och vilken betydelse det får för lärandet. Lärandet som undersöks är hur individer kan tillgodogöra sig yrkeskunskap utifrån de läroprocesser och lärandesituationer som uppstår i samband med arbetsrotation.De teoretiska verktyg som används grundar sig i Ellströms feed-forward och feed-back faser, de tre regleringsnivåerna av lärande samt en teori om subjektiva och objektiva handlingsutrymmen. Studien använder sig även av Börnfelts teori om en formell och informell organisation.Den metod som använts är kvalitativ och grundar sig i öppna intervjuer med åtta anställda från ICA-butiker med olika butiksformat, med det syftar vi till ICAs butiksformat; Nära, Supermarket, Kvantum och Maxi. Intervjuerna har transkriberats och analyserats ner till fyra olika teman; Arbetets innehåll, Avvikande situationer, Formellt Medarbetarskap och Informella Relationer.Resultatet visar att om anställda roterar mellan avdelningar eller ställs inför utmaning öppnar det upp individers handlingsutrymme, vilket leder till feed-forward faser som i sig genererar lärosituationer där anställda kan lära sig på en begreppslig- och intellektuell nivå.

Microstrip Solutions for Innovative Microwave Feed Systems

This report is introduced with a presentation of fundamental electromagnetic theories, which have helped a lot in the achievement of methods for calculation and design of microstrip transmission lines and circulators. The used software for the work is also based on these theories. General considerations when designing microstrip solutions, such as different types of transmission lines and circulators, are then presented. Especially the design steps for microstrip lines, which have been used in this project, are described. Discontinuities, like bends of microstrip lines, are treated and simulated.

Tillskottsutfodring av smågrisar under digivningsperioden :

Weaning is one of the most critical events in the piglet production with problems such as growth check and post-weaning diarrhea as a result. The lighter the piglets are when the growth check occurs, the harder they have to get back to normal growth rate. Creep feeding of piglets is used to reduce the problems by increasing the weaning weight and adapting the digestive tract to a starter diet. Hodge (1974) showed that the sow?s milk can not provide enough nutrients for maximal growth rate.

Snurrar läshjulet när Boksnurran stannar? En studie i hur man kan arbeta med högläsning och böcker i förskolan

The aim of this thesis is to describe how to work with the development of language by reading aloud. I have chosen to look at the reading aloud project "Boksnurran" Book Wheel to see if it has influenced the daily work with reading in preschool. My questions are: How do they work with reading in preschool? Is the reading environment suitable? How do the staff describe their booktalks? What problems do they encounter? What can be improved? The thesis is based on qualitative interviews. Those interviewed have participated in "Book Wheel".

Dubbskador på Alvestakubb

Mechanical harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of temperature on damage occurrence.

Äppelpressmassa i Sydsverige - nuvarande användningsområden och möjligheter till nya produkter

Pomace is the solid remains (i.e. stems, pulp, seeds, and skins) after pressing for juice. The annual production of apple pomace is 593 000 ton worldwide. Its field of application depends on local conditions. In order to investigate the field of application of apple pomace in the Southern Sweden, six persons on companies with production of apple juice were interviewed.

Ekologiskt uppfödda kycklingar : en jämförelse mellan två olika foder

Organic rearing of broilers is not a large production in Sweden. In order to create a sustainable yet efficient production of organically produced poultry meat, at a price that the consumers are willing to pay, much more knowledge is needed. It is therefore important to do more research on organic broilers under Swedish conditions. This report is aimed to be a base for further studies. In the study 2000 broilers of the hybrid Ross 308 divided in to two equal groups. The broiler hybrids that are used in Sweden are selected for a high growth rate and are normally slaughtered at the age of 5 to 6 weeks, with a slaughter weight of 1.7-2 kg.

Konstruktion av serviceutrustning till tunnelborrningsmaskin

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

<- Föregående sida 5 Nästa sida ->