The aim of this study is to find information about what to do when riding arena footings are worn-out. Especially, the surface layer of riding arena footings is very interesting because of its importance of giving grip in every step for the horse, as well as shock ab-sorption. Generally, surface layers are containing several different parts in order to achieve desirable properties. These different parts can consist of organic material or in-organic material (mostly gravel). Gravel and many other materials in the top-layer are environmental friendly, and therefore, easy to get rid of.

Ronneby Miljö- och hälsoskyddskontor ville genom undersökningen få information om nitrathalter ienskilda dricksvattenbrunnar inom kommunen, med bakgrund av den nya miljökvalitetsnormen.Riktvärdet för nitrat är 50 mg/l. Halter som överstiger detta bör inte ges till barn under ett års ålder pågrund av risk för methemoglobinemi. Jämförelsen skulle ske mellan områden präglade av jordbrukrespektive skogsbruk, samt mellan grävda och borrade brunnar. Jämförelsen skulle även ske över tiden,mellan 1975-1990 till 2005. Urvalet av provtagningspunkter baserades på en sammanställning frånbefintligt arkiv samt efter en annons i dagspressen.

Ronneby Miljö- och hälsoskyddskontor ville genom undersökningen få information om nitrathalter ienskilda dricksvattenbrunnar inom kommunen, med bakgrund av den nya miljökvalitetsnormen.Riktvärdet för nitrat är 50 mg/l. Halter som överstiger detta bör inte ges till barn under ett års ålder pågrund av risk för methemoglobinemi. Jämförelsen skulle ske mellan områden präglade av jordbrukrespektive skogsbruk, samt mellan grävda och borrade brunnar. Jämförelsen skulle även ske över tiden,mellan 1975-1990 till 2005. Urvalet av provtagningspunkter baserades på en sammanställning frånbefintligt arkiv samt efter en annons i dagspressen.

Following the accident at the nuclear power plant in Chernobyl in 1986, great volumes of137Cs were distributed over large parts of the former Soviet Union and Europe. Over Scotland,radiocaesium was deposited as wet deposition. Due to the relatively long physical half-life of30 years, there are still measurable activity concentrations in the natural environment. Thisstudy was made on two organic soils, Knockandy Hill and Rora Moss, situated in the easternpart of the central highlands of Scotland. At these two sites, studies on migration and transferbetween soil and plants were conducted.

The Arctic region appears as a pristine remote environment, yet there is increasing evidence that it is greatly impacted by pollution such as lead (Pb) and mercury (Hg). In this environment deposition of Hg has increased threefold since the last industrial revolution. In this study five cryosolic soil profiles within non-sorted circles (NSC) in the Abisko region, northwest of Sweden, has been analyzed to improve our understanding regarding how pollutants are distributed within such type of soil. The soil samples have been analyzed with the use of X-ray fluorescence analysis (XRF), for the measurements of the total concentrations of e.g. lead (Pb) and zirconium (Zr).

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

A secondary and a pioneer tree species can with advantage be included in a mixed stand to increase the use of sunlight. Nitrogen-fixing plants have been shown to increase the supply of nitrogen in the soil by, for example, litter fall. This deposition acts as a biological fertilization, which may be used by non-fixing plants. Alder is a nitrogen-fixing, pioneer tree species that loses its nitrogen-rich leaves late in the autumn. The aim of this study was to examine the effect on the total volume of production, when different proportions of nitrogen-fixing Alder were part of spruce stands.

EGR (Exhaust Gas Recirculation) är en teknik som används för att minska utsläppen av kväveoxider från förbränningsmotorer. Med EGR återcirkuleras delar av avgaserna till motorn vilket medför att sot och andra partiklar samt sura ämnen återförs. Därmed ställs det nya krav på motorns material och det gäller framförallt motorns cylinderfoder och kolvringar som detta arbete inriktar sig på. Syftet med arbetet är att med hjälp av en nötningsrigg sålla mellan olika material och ytbeläggningar under EGR-liknande förhållanden samt att undersöka olika faktorers inverkan på slitaget. En nötningsrigg av typen pinne-platta används där en del av en kolvring förs fram och tillbaka över en provbit från ett cylinderfoder.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

A lot of mine waste rock and tailings arise from all mining processes and have to be stored in an appropriate way. Tailings are deposited in impoundments retained by tailings dams. The objective of tailings dams is to retain the slurry from the mining process and in that way prevent spill into the surroundings that might be harmful for the environment. Tailings dams are often constructed as staged embankments so that construction costs and demand of materials are spread more evenly over the period of deposition.The objective of this thesis has been to compile information about and evaluate events at Swedish tailings dams and also to develop a collective database for all Swedish mining companies for all tailings dams and all events that occur at tailings dams.Information about 60 events at Swedish tailings dams has been gathered and evaluated. The evaluation has been performed by comparison between and analysis of individual parameters and also by use of a multivariate statistical method called PLS.

The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

The concentration and storage of organic chlorine and chloride were determined in soil, to a depth of 40 cm, in a coniferous forest in the Stubbetorp catchment area in south-east Sweden. Also, the spatial distribution of the two forms of chlorine was determined. Soil samples were collected at 49 of the nodes in a grid with approximately 105 m between the nodes. The analysis of spatial variability suggested that no spatial autocorrelation was present either within the variable organic chlorine or chloride. This means that no sample was more influenced by another nearby sample, as compared to other samples further away.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.