This report was written by Lisa Bengtson and Hanna Paradis and describes the degree thesis "Environmental impacts of solid waste treatment in the Metropolitan Region, Santiago, Chile ? a comparison between current system and incineration with energy recovery". The purpose of this thesis was to investigate if incineration with energy recovery could be motivated through an environmental perspective as an alternative to landfilling of solid waste in Santiago, Chile. The study was performed with Life Cycle Analysis as a theoretical base. In Santiago, situated in the thirteenth region of Chile, Región Metropolitana, lives 6,5 million inhabitants. The major part of the solid waste produced in the region is landfilled on three different sanitary controlled landfills situated outside the city center.

AbstractA prerequisite to be able to use semi-natural pastures in an optimal way is knowledge about their conditions and properties. One thing to consider is the amount of herbage mass that can be produced during one season on different types of semi-natural pastures. That knowledge makes it easier to choose which type of animals and how many you are able to have in each paddock to maintain a high biodiversity and achieve the desired production of the animals at the same time.This study was performed in nine different semi-natural pastures around Uppsala. The paddocks were already mapped with regard to different vegetation types. Exclosure cages were placed on previously fertilized, mesic, dry, shaded and wet vegetation.

Title: Ethics in thought and practice ? a qualitative study in how editorial staff at student magazines reason about ethics. (Etik i tanke och praktik ? en kvalitativ studie i hur studenttidningsredaktioner resonerar kring etik)Number of pages: 30 (37 including enclosures)Author: Bianca GidebackTutor: Peder Hård af SegerstadCourse: Media and Communication studies CPeriod: Spring 2010University: Division of Media and Communication, Department of Information Science,Uppsala University.Purpose/Aim: The purpose of this study is to explore how students that work at student magazines reason about ethics of journalism and how they transform it into practice. By identifying what circumstances in the context of the student magazine that can affect the work this study aim to see if and how this can affect how they conform to ethics of journalism in practical situations.

AbstractAt Saltvikens copperindustry, which is located in the municipality of Oskarshamn, copper was refined from sulphiteore some hundred years ago. The ore underwent several steps in the process before the final product was received. These steps all had an influence on the environment through discharge of heavy metals. The area where the copper industry was located is today considered to be of specific national interest due to its valuable nature and cultural values, as well as its value for recreational outdoor activities. Therefore, it is important to determine the present level of contamination and if any transport of contaminants have occurred, and to identify the risks that are associated with the site both at present and in a longer time perspective.Thirtynine soil samples and 16 sediment samples have been analyzed.

Glulam?s position at the Swedish market for building constructions has been established over the past decades. Factors affecting glulam demand are found both in global and national contexts as well in customer attitudes and knowledge of the material. Arguments for environmentally friendly and sustainable construction processes and energy-efficient designs are nowadays common, which is something that should motivate increased usage of wood as a renewable material. For the glulam industry to increase its sales, improve profitability and thereby gain market share in present competitive climate, reliable market information and updated market intelligence is required.

Heat stress negatively influences the performance of dairy cattle such as lactation and reproduction. Heat stress can cause production losses as well as welfare problems. Years of research have shown that heat stress is a huge problem for dairy cattle in both the tropics and temperate zones but no such research have so far been done in northern European countries. It seems like shade is an important tool when improving pasture conditions and therefore deserves more attention. The aim with this study was to investigate whether there is a need of providing shade for grazing dairy cows during the summer in Sweden. Two groups of lactating Swedish Red dairy cows (n=15 per group) were kept on pasture.

Sustainable development has become more and more important over the past years. The term Corporate Social Responsibility (CSR) is closely connected to sustainable development and focuses on organizations responsibility towards the society and the environment in which it exists. Companies within the mining industry were among the first to initiate CSR-work due to the fact that they have a great impact at the local community, both socially and environmentally. Today they are still in the forefront of the development of CSR-questions in general, and community involvement and development in particular. Earlier studies made on this area have focused on the strategic level of community involvement and development.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Issue of study: The development of technology and society is closely linked. Mutual dependency and complex interrelationships make straightforward analysis of issues regarding the future of technology and society hard to perform. Therefore, the study addresses the question of how organizations should describe and analyze the interactions of technology and society in order to gain a better understanding of what the future may bring. Purpose: ? To develop a method for analysis of the future course of issues regarding technology and society in interaction.? To apply and test the developed method through a case study, where it is used to analyze the future of the Russian fuel market.

The goal of this thesis was to explore how real estate investment companies are affected by a weaker world economy. The reason to investigate this was that in the 90s in Sweden, the housing market crashed in conjunction with the bank collapse. Therefore I have looked at how the commercial real estate companies would be affected if we were to have a double dip recession, because it has been confirmed by Gyourko that commercial real estate market and the housing market tend to react in the same way on new fundamental information. This was examined through a sensitivity analysis, one investigated the effect of falling rent income and the second analysis looked at the effect of higher interest costs. I found that IAS 40 rule about unrealized profits of properties affected the results in a significant matter and therefore decided to include the regulation in my thesis.

Bakgrund och problem: Målkostnadskalkylering innebär att ett företag samarbetar med sina leverantörer för att tillgodose slutkundens önskemål och för att kontrollera kostnadsnivåerna. I vår uppsats undersöker vi vilka kontextuella faktorer som påverkar leverantörernas möjlig-het till inflytande inom ramen för en målkostnadskalkyleringsprocess samt hur leverantörer själva kan påverka processens förutsättningar.Syfte: Uppsatsens syfte är att skapa en förståelse för den problematik som finns kring vad som avgör hur mycket en leverantör kan påverka målkostnadskalkylering.Metod: Vi har använt kvalitativ metod, och som en del i detta personliga intervjuer, för att kunna få en bra kontakt och för att kunna förstå respondenten. Vid urvalet av företag utgick vi från Volvo Personvagnar och tre av företagets leverantörer, Autoliv AB, Bulten AB och Finnveden Metal Structures AB, som vi har valt ut så att alla inte har samma beroendeställ-ning gentemot Volvo Personvagnar.Resultat och slutsatser: En av de kontextuella faktorer som påverkar leverantörers möjlighet till inflytande inom målkostnadskalkylering är leverantörens beroendeställning till köparen. Ju större beroende, desto mindre går att påverka. En annan faktor som påverkar är typen av komponent som leverantören tillverkar.

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

The essay examines through semi-structured interviews the experiences of overcrowded housing, as they are portrayed through the eyes of children aged 8 ? 14. Overcrowded housing has an effect on children?s school performance, general health and is often linked to less capacity for normal social consumption. Yet there seems to be little done in terms of interrogating children about how they perceive their situation here and now.

This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.