When the costs for a company increase it is normal to look for alternatives to lower thesecosts. One of the expenditure that farmers have is energy costs. The price for the energy mayvary because of the free market. To look at the possibilities for a farmer to invest in sunpower, to make the company less sensitive for the changes on the electrical market, isinteresting. The biggest part of the electricity that is produced in Sweden comes from a fewcompanies on the market.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

Infringement of intellectual property rights often causes significant economic damage. The problem with illegal activity concerning counterfeiting is constantly increasing. The development has lead to constitute an extensive international activity which is harmful for intellectual propery owners, consumers and the society in general. Competing products tend to be increasingly similar to each other, with rather similar marketing-, sales-, and pricingstrategies. As a result, the trademark strongly affects consumers? selection-process during purchase.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

This paper aims to study, from a legal dogmatic method, the Swedish legislation on fixed-term work related to the EU directive 99/70/EC1. In particular, the directives demand to prevent abuse of frequent temporary employment.An employer may, in agreement with the Swedish legislation combine different types of temporary employment, to prolong the time in the temporary employment. In this proceeding an employer can avoid employing an employee in a permanent position. For example, an employee can be employed in a probationary period of six months, in a general temporary employment for a maximum of 24 months, and thereafter in a temporary position for a maximum of 24 months before the employment turns into a permanent position. This provided that the employments were made by the same employer, and within five years.

A future expansion of wind power in the Nordic power system makes the balancing for the transmission system operator Svenska Kraftnät (SvK) more complicated. Up to the hour of delivery the balance responsible parties? (BRP) makes prognoses and plans, for consumption and production, to help maintain the balance in the electrical grid. How well this is accomplished is affected by the setup of the market design. Therefore SvK has proposed the following possible changes in market design: Increase the imbalance costsIntensify the regulation of imbalancesIncrease the temporal resolution on the different marketsPresent the prices for balancing power in real-timeModify the balancing market to simplify auction of consumption bidsA mapping over the BRPs? processes within planning and trading on the day-ahead, intra-day, and the balancing market has been performed in this thesis.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

AbstractMatchmaking on an organisational level? about co-operation between municipal introduction-units and voluntary organisationsEssay in Political Science D, by Rebecka Johansson, spring 2006The aim of this study is to examine co-operation between municipal introduction-units, which work to integrate newly arrived immigrants and refuges, and voluntary organisations in Sweden. The essay is a comparative case study which examines three local authorities and the main questions are;- Do voluntary organisations constitute a functioning co-operation partner to the municipal introduction-units? Are there conditions for future co-operation?The answer to the questions is that there are no, or rarely any, co-operation between voluntary organisations and municipal introduction-units. It is difficult to judge whether there are conditions for future co-operation.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Title: Management control of facility efficiency in municipalities - A case study of Halmstad municipalityLevel: BachelorSeminar date: 2012-05-31Authors: Markus Nilsson & Sara MattssonAdvisor: Sven-Ola CarlssonKey words: Control management in municipality, facility efficiency, management by objectives, internal rents and incentivesBackground: The public sector owns and manages a large property portfolio and in the municipalities, the properties are always a big cost item. Because of the outside world changes and the public interest, the properties should be used as efficiently as possible.Purpose: The purpose of this paper is to describe how control management of facilities looks like a municipality. The paper also seeks to explain how employees work to make the facilities more efficient in a municipality.Methodology: The authors use a qualitative method with open interviews.Theoretical perspectives: The choice of theory was made with the field of management control and facility efficiency in mind. The theory therefore includes management by objectives, internal rents and reward systems, motivation and communication within organizations.Empirical foundation: The organization has undergone a reorganization 2010/2011. There are no clear incentives to reduce facility costs.

The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

ProblemThe manufacturing industry is a mature industry where the profit margins are small and the competition is hard. This makes it hard for both manufacturers and resellers to gain market shares and reach reasonable profit margins only by selling products. Therefore Swecon who is reseller for Volvo Construction Equipment tries to find alternative methods and ways to increase their profit. An alternative source of income could be to develop the range of services that are connected to the ground products.PurposeThe purpose of the thesis is to examine how Swecon in southern Sweden can improve their offers of existing services connected to the ground product and investigate the demand of new such services.MethodThis study is based on a qualitative study of five of Swecons local offices and five of Swecons customers. The empirical framework is mostly based on personal interviews but in some cases information was retrieved by using phone interviews.

The purpose of this thesis is to describe property definition and special boundary demarcation and to analyze the differences between the two cadastral procedures. Property boundaries, especially unlawfully determined boundaries created through unofficial parcelling, can create conflicts between landowners and make it diffi-cult to know which land that a property contains of. It is possible to clarify the boundary conditions through a property definition or through a special boundary demarcation re-establish boundary marks.The methods used are: (1) A literature review to collect background information, (2) A case study to summarize court cases and (3) A questionnaire study to collect opinions from cadastral surveyors.The result is summarized in two comparisons. Firstly between restoration of landmark and special boundary demarcation (which replaced restoration of landmark in a legislative change in 2010), which demonstrated that the change in the law is considered positive because special boundary demarcation gives a legal effect on the boundaries. Secondly between property definition and special boundary demarcation which demonstrated that the two procedures are similar to each other.

Background: The standard of living should be the same for everyone, whether the apartment is placed in an old or new building. The residential properties that were built from 1965 until 1974 is now beginning to become old and in need of restoration. The financial crisis during the nineties contributed to the lack of maintenance on the buildings in Sweden. As the public buildings gets older more and more defects occurs. The coordination and maintenance will therefore have a more significant role in the housing company ?s work.The increasing interest about how old a building can be, attract much attention.

To be able to move around without having to think about each movement is for most people amatter of course. Todays society contributes to a life at high speed where the sparetime is oftenspend doing somekind of sport, even extreme sports which earlier only a few people wheredoing. This leads to not only good health effects but also to more injuries. One of the mostcommon injuries is the knee injury.Capio Artro Clinic is a clinic specialized in sports medicine and particulary patients with injuriesin knee, shoulder, foot, hip or elbow. They perform a great part of all the crucial ligamentsurgeries in Sweden and has therefor also a lot of patients in need for rehabilitation of the knee.During the rehabilitation the load of the injuried knee is increased in steps.