Non-attendance and cancellations within dental care is a problem resulting in both financial and time consuming losses. The purpose of this questionnaire was to investigate different factors influencing non-attendance and cancellations. Six public and private dental clinics located in Skåne participated. Information about the clinics and patient-related factors were collected. Result: Totally 182 patients cancelling or not attending their appointment were registered.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The aim of this thesis is that through a case study, analyze and evaluate whether the customer is high - or low involved and connect with the choice of marketing strategy using a celebrity.This thesis is about how a celebrity can be used in marketing to affect a company's customers. The essay is facing the fashion retail industry, where three companies, Lindex, H&M and MQ, has been studied and compared. Lindex is using celebritiy Emma Wiklund by an internal collaboration within the enterprise. MQ is using various celebrities in various campaigns throughout the year and use them in external advertising campaigns. H&M is using interactive marketing with different celebrities in the form of, for example, guest collections for the company.

AbstractTitle: ?A more humane and equal world? A consumers view on corporate social responsibility and the internet based apparel commerce.Author: Fanny Bergström & Isabelle BlancMentor: Emma SvenssonPurpose: The purpose of this thesis was to examine the attitudes and experiences of consumers in relation to Internet based commerce and corporate social responsibility. The study is based on the following questions; 1. How do costumers perceive Internet based companies and their work with CSR-questions? 2.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

The purpose of this study is to investigate the managers? perspective on leadership in relation to the motivation of the employees by an example of a manning and recruitment agencies. This is implemented by framing of two questions; What kind of leadership can be identified by middle managers to motivate their employees? Which motivation factors are relevant to employees based on the perspective of the managers? To answer the question and identify leadership strategies and motivational factors and the relationship in between, we have conducted eight interviews with persons who hold a middle management position. Through a qualitative investigation we have been able to go into depth and had access to these managers reflections, thoughts and experiences.

Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

This master deals with the theme youth and public libraries. The essay is based on observationsand qualitative interviews with young people at the ages of 13 to 16 years old, whovisited the public library of Skara, employees at the library, and politicians in the community.The main issue in the study is; what is and what can be done to increase youth utilization ofpublic libraries. I have emphasized on the media stock, the organization of books, theenvironment and the staff of the library, marketing, specific target group, activities, andcooperation with both internal and external forces.Theories about youth culture and some projects concerning young peoples behaviour in librariesare also presented..

Non-attendance and cancellations within dental care is a problem resulting in both financial and time consuming losses. The purpose of this questionnaire was to investigate different factors influencing non-attendance and cancellations. Six public and private dental clinics located in Skåne participated. Information about the clinics and patient-related factors were collected. Result: Totally 182 patients cancelling or not attending their appointment were registered.

A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

This master thesis has been written in collaboration with Science Park Jönköping and is based on a problem related to corporate innovation. Science Park Jönköping believes that there is an untapped potential in existing industry in the form of ideas that are never commercialized. These theories are also supported in the research in which other authors have perceived that the ideas and inventions which do not belong to the core business risk ending up in drawers. If more of these ideas could be spin-offs or other forms of enterprise instead of staying in the drawers it would lead to growth, both for companies and for the society in large.The purpose of the thesis work is to, based on the case Science Park Jönköping, analyze how science parks and incubators can support the commercialization of ideas that derive from industry, who otherwise had been left lying. The work began with a mapping of the Science Park Jönköping operations and the skills they possess, and then other initiatives that aim to commercialize more ideas from companies were examined.

Background: The design industry is relatively immature in Sweden but large on the international market, where companies have used services from industrial design firms for a long time. Companies incresignly realise that design is an efficient mean to gain competitive advantages on the market. Several design companies fancy growth and to receive a wider market share to expand on the international market. One of them is Design Communicaton who has made a couple of acquisitions, to receive wider comptences and to cover different segments. That has lead to an increased brand portfolio with different subbrands, which can be complicated to handle efficiently in the internal and external communication.

The title of this project: "Istället för träd" translates as "Instead of trees" or "Replacing trees". By looking at different ways of replacing trees in the urban environment through functionality analysis, I study the creative process. To achieve this, I present eleven different ideas, and follow and analyse the process of sketching. One conclusion about the creative process is that it is a non-linear chain of events influenced by factors like method, external impressions and chance. A complete design, "Trasmattan" ("The rag") is presented. It consists of a colourful striped carpet made from rubber surfacing covering part of the sidewalks of the central street "Dragarbrunnsgatan" in Uppsala, Sweden. .