This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

The Swedish emigrants, in 1901-1904, were displeased with their home country, so they moved to America with hope to find a better life. Even though they were displeased they still had a great love for their home country and tried to either create a ?new Sweden? (the Swedish-Americans), or they traveled back to their families, hopefully with savings big enough to buy their own home. Sweden did not have a homestead act like the Americans did, which probably is the biggest reason to the emigration. There was also the question of each individual?s right to vote.

School and education are topics that are frequent in Swedish media. The intention of this essay has therefore been to investigate the image of teachers and their profession in Swedish daily press. The overall aim has been to analyze how teachers are portrayed in the debate that followed the TV-show Klass 9A, and by that find how the debate defines the concept of a good teacher. The representation that was found was then compared to earlier studies. The series was shown on Swedish television between January and March 2011.26 articles were chosen and the ambition was to have various perspectives represented, such as different voices and also papers from different areas of the country.

This bachelor thesis aims to draw attention to sound in the heritage sector in Sweden. In particular, to thesoundscapes that can be identified in our cultural heritage environments. Sounds in an environment, here calledsoundscapes, affect our perception of the environment and how we remember it.To find out how the heritage sector uses and would be able to use sounds, I have firstly studied if audio recording iscomparable with the visual photographic image. I then present examples of sound documentation concerning theconservation of built environment. In addition, I have interviewed five key informants who all have a centralresponsibility for five cultural heritage environments.

The purpose of this report is to investigate the possibilities with drain water heat recovery (DWHR) in residential buildings. Information and relevant theory has been collected and summarized in this report. Calculations have been done for given scenarios to evaluate profits. DWHR heat exchangers use simple technology and have long life-time. The heat exchanger is connected to outgoing drainage pipe and incoming cold-water supply so countercurrent flow is accomplished.

Concept - detail - buildingStockholm International Fairs, new main entrance I studied at the KTH School of Architecture from 1995 to 2000. After completing my studies I wanted to work in an office that had a structural way of thinking and that knew the building process; I therefore chose to work for Rosenberg Architects. I have worked on a number of projects, among them several for the Stockholm International Fairs, from the Rica Talk Hotel and Hall AE, to the new main entrance.In the projects we undertook at the School of Architecture we had to identify and draw details that were central to our concepts. I have here identified some key details that we considered to be essential for the concept in a built project; the new main entrance of the Stockholm International Fairs completed in 2013. The entrance has complex logistics with multiple intersecting flows: exhibitors, employees, journalists, VIPs and others.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

The goal of this project was to together with Cochlear Bone Anchored Solutions AB develop a new cleaning tool for their Baha?systems. Cochlear BAS AB is a daughter company to Cochlear Limited based in Sydney, Australia. Cochlear BAS AB is situated in Gothenburg and with its 150 employees develop and manufacture the Baha?system.

Taking a qualitative approach, this research investigates different theories and methods for creating parks that people will cherish and visit during their daily life. It also takes on the task to understand how principles of developing recreational values in a small forest is affected by the addition of a new element to the landscape, i.e. a major highway. Data was collected through the combination of focused literature review and study trips. This provided a framework which in turn was applied to the subject of the study, i.e.

Background: The construction industry is Sweden?s single most important industry branch with a significant influence on Sweden?s wealth. The political restrictions that once controlled the industry are today almost gone. This combined with an unbalanced supply and demand situation on the Swedish constructions market, caused by urbanisation, has led to increased pressure on the Swedish construction companies who now are forced to find new methods in their struggle to contain or increase their competitive advantage. Purpose: The purpose of this thesis is to survey: which strategic variables are of great importance in today?s Swedish construction industry with focus on the four main actors, JM, NCC, PEAB and Skanska.

Introduction: The number of hearing impairments in Sweden is increasing. The largest increase is seen in ages 25-44. There are reasons to believe that these impairments are noise induced. Leisure time noise is not controlled in the same manner that industrial noise is. An ongoing conflict between city council officials and rock club owners, musicians and music event organizers about sound levels at smaller live music clubs exceeding the national sound level restrictions created the need for an acoustic intervention project.

The purpose of this project was to evaluate how energy efficiently some of JM?s residential buildings can become in standard production. What kind of measures are needed to achieve the level of energy demand that is included in BBR12 (Boverkets Byggregler)? What measures are needed for achieving a lower demand so that the buildings could be classified as passive houses? The investigation has included a single family house and two different types of apartment blocks.The simulation programs Enorm and VIP+ have been used to calculate the energy demand of the buildings. The results from the programs have been compared with the measured energy demand for the three buildings.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

This Master's thesis aims to investigate librarians' identity construction through the study of their narratives about themselves and their lives. We want to understand in what way the education in Library- and Information science contributes to shape the students professional identity and how these identities then continue to be transformed when they enter their professional lives. We assert that this construction of identity takes place through socialisation. We start with the reference work because we think this is a central part of librarians' tasks. Our theoretical starting point is constructionism, we mean that professional identity is a social construction that continuously is formed and transformed.We interviewed six former students at Library- and Information science at Lund University.