This report summarizes the development of a calculation program estimating the profitability of converting a peak-load oil-fired boiler to pellets. To convert an oil-fired boiler to pellets a new fuel handling system must be designed. Changes also have to be made to some other components. Since there are many different techniques for transportation, storage and treatment of the fuel only the most interesting techniques from Swecos experience and interest were included in the study.The capacity of the different parts in the system was dimensioned based on the power of the boiler after conversion. To estimate prices, installed power and dimensions manufacturers and distributers were contacted.

I Sverige finns sedan länge ett stort behov av energi för att värma bostäder och andra lokaler. Under senare år har även behovet av kyla ökat. Sedan 1992 produceras fjärrkyla på ett flertal orter i landet. Fjärrkylaproducenten levererar kyla (i form av kallt vatten) till kunden för kylning av lokaler eller processer. Fjärrkyla kan ofta produceras på ett mer miljövänligt och billigare sätt än traditionell kylproduktion, som produceras med kylmaskiner vid varje fastighet.I detta arbete utreds förutsättningarna för att lagra kyla i form av is eller snö från vintern till sommaren.

Authors: Patrik Jäverbo & Jon LindheTitle: Greener on the other sideLevel: Bachelor of JournalismLocation: University of GothenburgLanguage: SwedishIn later years the strict laws and policies surrounding cannabis use have been questioned around the world by several influential leaders, among them US president Barack Obama and former UN secretary general Kofi Annan. It has been argued that the ?War on Drugs? has done more harm than good and in some American states and a number of European countries the drug have been legalized or decriminalized. Everybody does not agree however, that legalization is the best course of action and in Sweden the emotions have sometimes run high in the discussions taking place in television shows and newspapers.The purpose of this study is to examine the image media portrays of cannabis; based on the theory that mass media is an important influence on the individual and the way in which he or she views the world. To put the result into a context the Swedish media image will be compared with the one in Denmark and Norway.

Vi lever i ett informationssamhälle. Idag hittar vi fakta om vad som helst, var vi än är, genom de gigantiska och otroliga resurser som nås via ICT idag. Med ökad teknisk kapacitet har informationsinsamlingen ökat drastiskt i mängd. Hur vi lagrar data är dock mindre diskuterat. Det nya skifte som kommit fram i datalagring är en flytt från lokalt förvaltade servrar till lagring i molnet.

Today in Sweden, apples are mostly cultivated for direct consumption, i.e. dessert apples. Apple breeding aims at developing cultivars with new and improved qualities in order to meet the demands of different target groups and to increase the interest in apples on the market. Different target groups have different views on the qualities of an apple. The consumer, for instance, wants an apple that is tasty and beautiful, while the grower, in addition, wants an apple cultivar that is healthy, has good winter hardiness and a predictable, annual productivity.

This thesis work has been performed at Volvo Aero Corporation in Trollhättan, at the department of ?hot structures? involving aircraft engine GP7000. The purpose with the study was to investigate the possibility to reduce size of the forging of flanges on the rear turbine frame when purchasing. Thereto examine the parameters that affect the flanges motion during the manufacturing process. The goal was to provide Volvo Aero with foundation to later bring in slimmed forgings.

The purpose of this thesis is to compare mass digitization and qualitative digitization, to see how the digitization process and the digitalized material differ. The study emanates from the mass digitization as it is performed at the National Library in Norway, and the qualitative digitization at the Royal Library in Sweden. The method used is document studies combined with mail interviews. The focus is upon the practical operation, to which counts: ?purpose & selection?, ?preparation, image capturing and processing?, ?metadata & text encoding?, ?quality assessment?, ?storage of digital originals and copies? and ?display?.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

In a column experiment the effect of three different biochars on nitrous gas emissions, nitrogenretention and water filled pore space (WFPS) were studied in a Swedish sandy soil, classified as aCryopsamment. Ammonium retention was positively correlated, while KCl-extractable ammoniumwas negatively correlated, with the specific area of the biochars. The question was raised whether thenegative correlation between extractable ammonium and biochar specific area reflects the amount ofammonium present in the soil or its extractability from the biochar, and whether methods forextracting soil mineral nitrogen, like KCl-extractions, have to be modified for application on biocharamended soils. There was a tendency of increased nitrate retention and KCl-extractable nitrate withbiochar and KCl-extractable nitrate was positively correlated with the specific area of the biochar. pHwas higher for all biochars compared with control, although the differences were not significant, andWFPS was lowered by biochar addition, significantly in one case.

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

Mechanization of Swedish agriculture started in the beginning of the twentieth century, to be able to have more animals without raising the number of employers. The horse business has not by far kept up with these cost savings solutions. Cleaning out stables and feeding horses are the most time-consuming tasks in horse stables today. The most common way to clean out the stable is still by shovel and wheelbarrow. The clean out process can easily be mechanized through semi- permanently beds with movable walls between the boxes so that the litter can be removed by a tractor or a loader.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

With the increasing costs in concentrate the importance in producing ensilage with a high quality is becoming more and more important. To succeed with this goal it is of importance not only to harvest in the right period, but also to be able to store the ensilage without a decrease in quality and nutrional values. To maintain a good ensilage the covering of the ensilage must be carefully made. An unsuccessful covering causes mould to grow in the ensilage, which both increases the work load and also increases the amount of feed which is wasted. A bigger amount of spoiled feed also increases the risk of feeding spoiled feed to the cattle.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

The aim of this report is to investigate how the work handling at the department for arriving goods at EFG in Tranås is working, as well as how it could be improved and made more effective. EFG is a corporation who process and sell office furniture. The company is working with a project concerning delivery precision, the subject is therefore particularly interesting from the perspective of delivery accuracy. The number of orders has increased notably during the fall of 2005 and the spring of 2006. This has led to new demands at the department for arriving goods and the topic is as a result of that important also from this point of view.Interviews and investigations have been conducted at location since no written material earlier has been made in the topic.