This report describes the building of a computer model that makes it possible to simulate the thermal climate in a greenhouse. The computer model is built on the physical theory of heat exchange that occur in a greenhouse, such as radiation and convective heat exchange. The model also includes the heat storage that is active in a greenhouse.The computer model is used to simulate the thermal climate in a greenhouse under three periods, winter, spring and summer. It also investigates which effect a concrete wall has on the thermal climate in a greenhouse. The purpose of putting a concrete wall in the greenhouse model is to investigate the possibility to store heat during the day and then use this heat when the temperature drops during the night.The result from the simulations shows that a concrete wall levels the big difference in temperature that normally occurs under a day in a greenhouse.

 A villas price depends on several important factors. By statistical data, a mathematical multiple regression model was modeled. The model has important explanatory variables such as living space, renovation year and standard points has been taken into consideration, in order to assess their impact on the final price for private homes.By using a statistical program,Minitab 16, the final model was selected with eight explanatory variables. The regression for this model explains up to 67.3 % of the variation on the final price.The results showed percentage wise that the standard points had the greatest impact on the price, there after renovation year and then living space..

Because of new emission and on board diagnostics legislations, heavy truck manufacturers are facing new challenges when it comes to improving the engines and the control software. Accurate and real time executable engine models are essential in this work. One successful way of lowering the NOx emissions is to use Exhaust Gas Recirculation (EGR). The objective of this thesis is to create a mean value model for Scania's next generation EGR system consisting of a poppet valve and a two stage cooler. The model will be used to extend an existing mean value engine model.

Purpose: The purpose of this thesis is to examine the ERK model's relevance, validity and potential need of development to better reflect how it looks today (2013). Method: The study is conducted through three surveys; the first two were face interviews with companies that sponsor Swedish soccer teams and the third study was conducted with a questionnaire to supporters outside a soccer stadium. Results: A model that would better reflect the reality of today (2013) could contain company pride, chairman?s whim, exposure, relationships and associations..

To enable the enhancement of the driver's environment in a forklift, an alternative form of steering has been evaluated. An earlier concept with a combined driving and steering wheel has been exchanged to a concept with two driving wheels. A link wheel has replaced the combined driving and steering wheel. The steering is done through differentiation of the velocities of the two driving wheels. The scope of this master thesis is to create a simulation model, create a control program and to evaluate the concept of two driving wheels.

This thesis purpose is to determine an explanation of the efficiency in a labour-market related project. ?Enter? is an EU-financed project with a focus on long-term unemployed workers in the district Härlanda, Gothenburg. Starting in September 2004, Enter offers individually based coaching and job guidance to totally 110 young persons with problems entering the labour market. The goal is to provide these people courage to find either full or part time employment or to start study.

AbstractSierra Leone is a very poor country in Africa. Botswana is another country, that has a similar history and the same deposit; diamonds. Botswana has reached economic growth and democracy and Sierra Leone has not.The purpose with this study is to explain why Botswana is more democratic and has reached a better result economic than Sierra Leone.The questions in this study are:What explains the democratic and the economic results in Sierra Leone and Botswana?* Dahl?s institutions that furthers a polyarchy?* Gunnarsson?s and Rojas? institutional explanations?* Diamond?s and Morlino?s ?rule of law??* Other explanations or a combination of the above-mentioned explanations?The method that has been used in this study is a comparative case study with a qualitative contents analysis. The result is that it?s hard to say that one explanation is the right one.

The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Organisations tend to focus more and more on product and process development to increase their competitiveness. Several major organisations, among them ABB, have developed models aimed to more effectively control and manage product development processes. ABB is using its standardised model ABB Gate Model for this. The purpose of this thesis is to analyze how the introduction of ABB Gate Model has affected the outcome of decisions and also the decision-making in the product development process. The study is limited to elucidate the version of ABB Gate Model handling product development projects.

The war between Georgia and Russia awakened the world pretty brutally when a small country like Georgia tried to restore order in South Ossetia. The war between the two countries took place over five days in August 2008. This paper discusses the Russian operational art and its development after the war. The starting point is to test the traditional and classic Russian theory of operational art. The aim is to describe and discuss the Russian operational experience and any developments and trends in the Russian Federation's armed forces. The purpose of describing the theory behind the operational art is to create an independent analysis model. The essay?s analysis is based entirely from qualitative research with the collection of qualitative data in the form of texts and documents with a holistic perspective. Initially, the theory chapter is created from an inductive approach to identify, define and describe the operational concept and principles, creating a theoretical model of explanation. The developed analytical model is based on the Russian theory of operational art and takes off from a deductive approach to the collected empirical data. The results of the performed analysis results are interpreted and the product of this presented in the operational conclusions. Russia had a strategic ability to win the war by means of strategic resources related to tempo, simplicity and shock effect on the Georgian troops. Russia carries out a variety of reforms and the outcome of the war demonstrates the importance of Russia having a strategic capacity to make use of one in the type of conflict that Georgia represents. This success shows that the strategic capabilities are initially a success factor, while the deficiencies in the operational and tactical levels cannot be accepted in the long run, but must be developed.

The purpose of this paper is to analyze the ongoing changes in German family policy. It explores the issue of whether the German welfare state, in this policy field, can still be regarded as a conservative welfare model or rather approaches a more liberal or social democratic model. A qualitative method is used to analyze the material, especially from the German government, including press releases, other public documents and also articles from the political weekly magazines Der Spiegel and Die Zeit. The changes analyzed are the new parental benefit, the expansion of child care, the concept of whole-day schools and the system of joint taxation. The point of departure is Gösta Esping-Andersen?s categorization of three types of welfare states: the social democratic, the conservative and the liberal.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.