In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

The third most common conifer in Sweden is Pinus contorta (lodgepole pine). It originates from the western part of North America and was brought here in the end of the 1920s. The lodgepole pine is today allowed for commercial plantations in central and northern Sweden, excluding high altitude locations. Since 1979 only plantations with scientific purpose are allowed in south-central and south Sweden. This document is focused on how lodgepole pine manage perform compared with Pinus sylvestris (Scots pine) in the southernmost part of Sweden, Götaland. The idea came from the fact that the Swedish government is evaluating a notification from the National Forest Agency that suggests lodgepole pine to be allowed for commercial plantation even in southern Sweden.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

Background: Breastfeeding frequency decrease in Sweden and infants born preterm is a particularly vulnerable group to not be breastfed according to current recommendations. Mothers of preterm infants have an extra need of support from the health care system. Mothers' self-efficacy in breastfeeding affects the outcome of breastfeeding. Health professionals' attitudes to breastfeeding have an impact on the breast feeding support they provide to the mothers.Aim: To investigate whether an intervention could strengthen self-efficacy in breastfeeding among mothers of premature babies. A further aim was to investigate whether the intervention influenced health professionals' attitudes to breastfeeding.Method/Design: An Experimental study with quantitative approach in the form of questionnaire survey was conducted.

Syfte och frågeställningarSyftet med studien var att undersöka effekten av en kortisoninjektion i bäckenligamenten på patienter med långvarig ländryggssmärta.MetodStudien genomfördes utifrån en single-subject experimental design med sex deltagare med långvarig ländryggssmärta. De utfallsmått som användes var smärtskattning (Numerical Rating Scale, NRS), skattad smärtrelaterad aktivitetsbegränsning (Oswestry Disability Index, ODI), skattad rörelserädsla (Tampa scale of kinesiophobia, TSK-SV), rörlighet (Fingertip-to-floor), funktion genom ett dynamiskt balanstest (Star excursion balance test, SEBT), funktionstest (sit-to-stand) och uthållighetsstyrketest (modifierat Biering- Sørensen), samt fysisk aktivitetsnivå mätt med accelerometermätare. Deltagarna genomförde fem testtillfällen innan och fem eller sex testtillfällen efter intervention. Vid sista besöket skattade deltagarna förändring av besvär enligt global index of change. Resultaten analyserades på individnivå genom visuell analys av trender och nivåskillnader i grafer, statistisk analys av graferna genom 2 SD-metoden, i kombination med deltagarnas subjektiva beskrivningar av eventuell förändring.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

Background: Breastfeeding frequency decrease in Sweden and infants born preterm is a particularly vulnerable group to not be breastfed according to current recommendations. Mothers of preterm infants have an extra need of support from the health care system. Mothers' self-efficacy in breastfeeding affects the outcome of breastfeeding. Health professionals' attitudes to breastfeeding have an impact on the breast feeding support they provide to the mothers.Aim: To investigate whether an intervention could strengthen self-efficacy in breastfeeding among mothers of premature babies. A further aim was to investigate whether the intervention influenced health professionals' attitudes to breastfeeding.Method/Design: An Experimental study with quantitative approach in the form of questionnaire survey was conducted.

Product development is essential for all companies that want to survive in competitive markets regardless of the characteristics of the product that the company sells. Companies that sell products within product categories which can be seen as bad, also need to develop their products in order to remain competitive. If these bad products add a positive attribute, for example that they get organic, a contradiction within the product arises and they get incongruent. This thesis investigates which effects that follow a launch of an incongruent product. The thesis also examines if these effects are affected by the strength of the brand under which the product is launched.A total of 240 respondents participated in an Experimental study where product incongruity was manipulated for two different product categories, where one well known brand and one unknown brand were examined in each category.

This thesis describes the development ofa linear guidance system suited for NORCAN's aluminium profiles. The work took place at LP Innovation, a small technical consulting company, located in Uppsala. The work started with gathering and searching for information. A lot of the information was found in product catalogs, but my supervisor was also a great source of knowledge, as well as the other engineers at the company. I also had the opportunity to work with the rea lprofiles, to get a feeling and greater understanding how they were supposed to be used. With the use of sketching and CAD, a number of concepts were generated.

This project investigates the cooperation between architect and engineer. The context of the investigation is the design of buildings for a sustainable society. The goal of the project is to further the development of the sustainable built society by increasing the knowledge of the interdisciplinary cooperation between these two fields. The focus is a close cooperation already from the start of a project. By involving both fields in the early design stages it is thought that the knowledge and skills of each field is better utilized.

In connection with riding and handling of horses, many accidents that can cause severe injuries to both horses and humans are existent. The cause is in most cases that the horse is frightened. The horse's fear also affects its usefulness and it has been shown to have adverse effects on the horse's welfare. To increase safety and improve the welfare of both humans and horses, it is important to find appropriate training methods to reduce the fear of horses in frightening situations. This Experimental study compares handled habituation to free habituation.

This project was intended to develop and improve my skills as an artist/designer. I have used inspirational sources and followedmy artist?s intuition to create something that is individual and a reflection of myself.My goal was to design 7-10 compositions and apply them to t-shirts and then create a photo arrangement with these t-shirts to make a strong artistic presentation.I chose to apply my images to t-shirts, because I feel that the tshirt is a perfect median to display pieces of art. My process has been very non-linear in nature. Trial and error,experimentation and my gut feeling have strongly influenced the progression of my design process and guided me to new ideas.I feel that with this project I have succeeded in fulfilling my goals to develop and improve my skills as an artist/designer..

Today dairy farmers in Sweden are obligated to have lights turned on during night time in addition to the mandatory daylight inlet. This presents a cost for the production but many argue that it can be economically beneficial, especially in loose housing of dairy cows. In loose housing and even more so in herds with automatic milking, well functioning cow traffic during all hours of the day is crucial to optimise production. In order to keep the cow traffic flowing, lights may be an important management tool. It is also perceived among farmers with tied up stall that night light decreases the incidents of cows accidental stepping on their own or neighbours udders.

Hylocomium splendens (Glittering wood-moss) is a common species in the Nordic countries and can be found in many different types of boreal forests. It usually forms dense moss carpets on the forest floor. The shoots grow in segments and new segments form annually on the previous years growth. The size of the segments is probably regulated in a high extent by local micro environmental conditions. Previous experiments suggest increased growth of H.