For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

This case study is performed within the production of Sherwin-Williams, Bellö. The purpose is to increase the understanding how a value stream can function more efficient, from a lead time perspective. With the analytical model that is build up on known theories, the purpose have been fulfilled. Mapping of value and non value time for four products thru their respectively process reveals wastes, which is, waiting, transport and movement, incorrect processing and set-up time that in it self create transport and movement. Thru identified wastes that causes loss in lead time suggestions of improvement has been proposed.

This study examines the background and nature of the credit default index swaption (CDIS) and presentsrelevant methods for modelling credit risk. A CDIS is a credit derivative contract that gives the buyerright to enter into a credit default index swap (CDS index) contract at a given point in time. ACDS index, in turn, is a multi-name credit default swap (CDS). Within the eld of research, thisthesis identi es the CDIS pricing models presented by Jackson (2005), Rutkowski & Armstrong (2009)and Morini & Brigo (2011) as the most recognized and developed. These models are evaluated byreconstruction in a numerical software environment.

This thesis treats the subject of a complete steady state and dynamic model of the VSC-HVDC covering both the AC and DC system-side of the converter. The topology of the model is recreated after the scheduled transmission line in the south of Sweden, called SydVa?stla?nken. The topology covers both a simple two terminal connection as well as a multi-terminal one. This model is to be implemented in the power system simulation program ARISTO.

The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

An energy calculation model for Swedish houses   that is fast, flexible and user-friendly has been developed within the   framework of this thesis.  The model   also provides a set of actions which may be investigated in the model based   on savings and payback period. Energy use in a house depends on the technical   conditions, such as building envelope and heating systems, which outdoor   climate the house is exposed to and who lives in the house. Energy use for a   house can be divided into heating, hot water and household electricity. There   are several methods to calculate the energy use of a house. This report   summarizes the methods that may be suitable for a fast and user-friendly   calculation model.

Resultaten visar på att abnormal earnings model är en mertillförlitlig modell i förhållande till dividend growth model. Dettafrämst då abnormal earnings model grundar sig på mer tillgängliginformation samt att tillväxträntan i dividend growth model harkonstaterats vara orealistiskt hög. Analytikers prognoser tenderaratt vara optimistiska i början av undersökningsperioden 2000-2002. Perioden 2003-2007 präglas mer av pessimistiskavinstprognoser. Marknadens riskpremie fluktuerar mindre underperioden 2005-2007, vilket kan förklaras utav införandet av IFRSår 2005..

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.

The purpose of this Bachelor thesis in Economics at Lund University is to try to establish the correlation between the value change of retail real estate buildings in Sweden and macro economic variables. The principal method is the multiple regression model and it is used to estimate the basic model. The basic model is enhanced by estimating some 30 models and the result is two good models. The difference between the basic model and the two better models are small but important. In the lagged basic model, the same variables are used as in the basic model but with different time lags.

On the internal market within the EU, freedom of establishment under articles 49 and54 TEU stipulates that companies have the right to set up businesses in other MemberStates. On the internal market there are 27 different national tax law systems whichhave caused obstacles regaring taxation between Member States. These obstacles havebeen shown deterrent when a company enters a new market. One problem area is thelack of cross-border loss compensation for groups. This means that cross-bordergroups is over taxed when they are unable to set of gains against losses.

Adjustment to acquired hearing loss can be understood as a process of learning and change where the point of departure is the subjective apppraisal of a person?s hearing loss in a social and cultural context. The aim of the study was to describe women?s thoughts, emotions and actions prior to audiological rehabilitation, since these are considered important for the ongoing process of adjustment and for the planning of rehabilitation. A phenomenographical approach was used in order to describe the variation in the women?s attitudes before attending rehabilitation.

This thesis explores some issues regarding estimations of the cost of capital on the Stockholm Stock Exchange through reverse engineering of the Residual Income Valuation model and through usage of the Capital Asset Pricing Model. Previous studies are in conflict of whether the risk premium changes considerably over time or not. Furthermore, the risk premium estimated by CAPM tends to be fairly stable. In this study, reverse engineering of the cost of capital implied by analysts? forecasts shows a significant difference in the risk premium over time.

This study reflects on the swedish model and the models future. The swedish modelmeans that legisilation acts with the collective agreements . The wage issue is notregulated by law instead it is managed by the social partners in the form of collectiveagreements. In 2008, a report was presented by the Commission on a joint regulation ofthe minimum wage for all EU countries. The issue has become increasinglycontroversial and was especially disccused for the election of candidates to theEuropean Parlament last spring.

This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

Demands on businesses are constantly increasing and the competition in the market-place is becoming ever tougher. To gain the long-term confidence of customers, not only the best businesses, but also the best supply chains are required.Volvo Cars is experiencing a changing competitive situation and their retailers are having trouble stocking the right spare parts. Shorter product life cycles and the growth of Volvo?s product program result in an increase in the number of spare parts to be stocked. In order to adapt to market trends and meet customer demands, Volvo has developed the LDC model, establishing a number of regional warehouses in strategic locations in Sweden, de-signed to supply spare parts to the regions? retailers through so-called Vendor-Managed In-ventory (VMI).The purpose of the study is to examine Volvo personbilar Sverige?s (VPS) motivation for a modified customer-service strategy through LDC.