The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

Fönster blir idag en allt viktigare del av en byggnads klimatskärm. Det ställs därför krav på olika funktioner vilka måste uppfyllas oberoende av fönstertyp. Då glas blir vanligare i moderna konstruktioner ställs det högre krav på värmeisolerande förmåga. Cirka 35 % av en byggnads värmeförluster sker genom fönster. Detta ställer krav på tillämpning av energieffektiva fönster vid ny- och ombyggnad. Underhåll av fönsterkonstruktionerna är en oundviklig detalj och måste ske någon gång under en byggnads livslängd.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their bearing capacity. Making holes in the web of the beam generally reduces the bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

This final project discusses renewal and upgrading of the area of Prim. It is discussed how this industrial area can be an attractive neighborhood with a varied range of services and commercial trade. Prim is located 2km north-east of the center of Barcelona. The area boarders to a deep railway valley that historically has separated Prim from its neighboring districts. At present there is almost no housing, services or commercial trade within the area and the industry is discontinued or the existing industrial buildings are derelict. There is also a lack of green recreational areas.

WSP building physics in Stockholm has certified the preschool Temmelburken in Bromma with the system of certification Miljöbyggnad. The rating of the building became BRONZE. In this thesis the preschool has been investigated with respect to the three areas: thermal climate, use of energy and improving of the level of certification. The thermal climate at the preschool has been investigated by a questionnaire survey and by measurements in order to do comparisons between the results from the two investigations as well as with the results of the simulations that WSP has done at the certification of the preschool. The differences between the results from the simulations and the questionnaire survey for winter as well as from the measurement performed with a comfort meter the 19th of March are concidered to be reasonably small since they give rise to the same rating according to Miljöbyggnad.   Operational data for the use of energy for the preschool have been obtained in order to do comparisons with simulations performed by WSP and Svenska Besiktningar AB. The comparison shows that the simulated values for the specific use of energy are lower than what the real specific use of energy would be for the preschool, since just the operational data for the heat energy is higher than the simulated values. At the investigation of the possibility of improving the level of certification it was found that the rating of the preschool can be raised from BRONZE to SILVER by improving the ratings of the ?thermal climate summer? and the ?daylight?.

This study has been made on behalf of the Swedish Transport Administration to study the work of the department National Projects. The Swedish construction industry has for many years been characterized by low productivity. By being the largest purchaser of contracts in the industry the Swedish Transport Administration has a unique opportunity to influence the productivity. In order to improve in productivity The Swedish Transport Administration is adopting a new role in which they will order more turnkey projects. In our study, we will focus on how one department within the Swedish Transport Administration, National Projects, can perform successful turnkey projects.To clarify how the department National Projects can perform successful projects, this study identifies critical factors for projects and their links to different phases of the project.

AbstractSkanska Sweden has decided to split the organization that earlier handled both large and small projects into two different subsidiaries. A consequence of this is that all construction service handling will from now on be enforced under the name Skanska Direkt AB. The management of Skanska sees this as an opportunity to develop the organization and in the long term achieve higher earnings.   The task which Skanska in connection with the reorganization wanted to be investigated was a proposal on how the organization of work with the insurance work in the future should look like.The organization that is handled is from production manager to professional workers and includes damage handling that has been obtained from insurance companies in the southern and northern parts of Värmland. The purpose with this work is to present a different kind of view to the problem with developing this branch of the company. The main target was to work out a proposal of an organizational plan for the damage handling in Skanska Direkt AB that is possible to apply, less sensitive for dismissals, results in higher earnings, obtains higher customer satisfaction and also a staff stab that develops their skills at their own.The report and work progressed as following:Opening theory study of strategies to obtain the objectives set.Restructuring of existing organization with theories as support.Interviews with the actors involved to verify feasibility of the developed organization plan  Organization chart, the result of work means that some workers at each location shall be responsible for a small group of workers and work independently. They shall manage the process of invoicing and calculate costs at the same time as they work out on the workplace.

A home for elderly is planed to be built at Zakrisdal, Karlstad, Sweden. The heat source for the building was at the time not determined. In order by the local government of Karlstad this report is meant to examine if the need of heat could be provided only by solar heat combined with a seasonal heat storage. The problem to solve is, if the need of heat from the home for elderly is provided from only solar heat, whitch dimensions of the solar collectors and the storage is needed?.

There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

The present thesis closer examines what has come to be known as al-Qaida, partly from what al-Qaida is considered to be, partly from the consequences a certain picture of al-Qaida might give rise to. Between 1988-2001 most of this thesis sources refers to al-Qaida as a small, organized core group with some degree of cell structure. From 1991 to present days, many of the sources enlarge the picture of al-Qaida. From now on they start to view al-Qaida as either a network in itself or al-Qaida as a part of a larger islamistic network, not only as an organized core group with presumptive bases in Afghanistan. The most recent of theories regarding al-Qaida looks at al-Qaida as an ideology in itself (al-Qaedaism) or al-Qaida as a part of previously existing ideologies (Islamism, Neofundamentalism and Jihadism-Salafism).Al-Qaida is being seen - by scholars, journalists and terrorism experts - as an organization with a core group, a network in itself, part of a larger islamistic network and an ideology of its own or as a part of already existing ideologies.