Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Idag ställs stora krav på företag att vara miljömedvetna och resurseffektiva i sin verksamhet. Vid mjukpapperstillverkning används stora energimängder och inom industrin har det under många år funnits en strävan att energieffektivisera processer och att tillvarata spillenergi, bland annat genom värmeåtervinning. Valmet Tissue Technology Center i Karlstad har idag en pilotmaskinen utan värmeåtervinningssystem. Den här undersökningen gjordes i syfte att ta reda på hur stor återvinningspotentialen är för värmeväxling i pilotmaskinens torkpartier, bestående av Yankeekåpan och TAD-cylindrarna. Tre maskinkoncept undersöktes: DCT®, NTT? och TAD.

Solar energy is the one most talked about among energy sources due to its huge potential amongst renewable energy technologies. A greater use of the solar energy may be the solution to today's climate threats. Normally there are two different types of solar technologies, solar cells and solar thermal collectors. Solar cells convert solar energy in to electricity whilst solar thermal collectors convert solar energy into heat, which can be used to heat hot water for households. This goal of this study has been to investigate the possibility of implementing solar energy into the energy system of Kista Galleria, one of Sweden's foremost venues.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

In Sweden, a big part of the energy use is used in the housing sector. Political goals and targets are set up which the housing sector needs to work towards. Apartment buildings are a major part of the housing sector in Sweden and therefore reduction of energy use in these kinds of buildings are key to lower the energy use in Sweden. But there are not only political incentives to reduce the energy use. Some energy?saving measures are directly profitable and should thus be performed.

Over 90% of forestry work is carried out today by contractors, thereforeclear agreements between the client and the contractor it is of utmostimportance. Contract Packages for work within the forest sector (APSE) is acollection contract templates that the industry jointly developed for thispurpose. The purpose of this thesis is to examine how forest contractors doto keep themselves updated of the current laws and government regulations,which channels are available to accomplish this and what possible obstaclesmay occur. 20 interviews were conducted with contractors engaged inlogging. The results show, among other things, the availability of and whichchannels most contractors use out of which aggravating circumstances existand how strong they are perceived and what is expected of the client in thisregard..

The purpose of this thesis is to identify and define Key Perfomance Indicators (KPIs) and value adding services which are used to describe the quality of Forias logistics services from different aspects. The KPIs should be attractive to both Foria and their customers, with the aim to strengthen the interaction between both parties.The basis for this work is a research in which a literature review and a survey of the market for Swedish logistic service providers were carried out. An analysis of the present situation of Foria was carried out, where a number of people in the company were interviewed. These elements were used together with definitions of KPIs to perform the analysis of the work.The result of the work is ten KPIs that have been created and developed for Foria and which are considered to be attractive to both Foria and the selected customers. The KPIs are: · ECO-driving (binary) ? the company has ECO-driving-educated drivers· ECO-driving (comparison figure) ? all drivers individual driving and its resulting exhaust emissions are compared· The environmental impact ? a total of exhaust emissions from all vehicles belonging to a single business, measured in tonne-kilometres· Complete order ? portion of fields with accurate information (in an order), with the possibility of error categorization· Delivery reliability ? time difference between expected and actual delivery, average for all orders· On-time ? the number of days and hours of difference between the expected and the actual time, for all activities of the order· On-time (activity) ? the number of hours and minutes of difference between the expected and the actual time, for each individual activity of the order· Divergence ? a categorization of all causes of divergence and its responsible department· Level of integration ? the level of cooperation between the logistic service provider and the customer· Customer satisfaction ? how well an order will meet the expectations of the customer The KPIs are described in detail with definitions, how they can be used and what is required to implement them in the service process of Foria.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

There are several energy systems in the Swedish society and to ensure the comfort and health of the citizens it is of importance that the different energy systems are functioning properly. District heating is one of these energy systems and many household depend only on district heating to warm up their homes. District heating is dependent on several processes where every step needs to function in order to deliver the produced heat to the end consumer. Previous studies have investigated the distribution of district heating and how to make customers choose district heating as their heating method. The supply of fuel to the district heating plant has not been studied as much, even though it is an important part of the whole system. This thesis is a part of the project NORD-STAR (Nordic Strategic Adaption Research), which has focused on climate adaption in the Nordic countries.

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

Idag fokuserar företag mer och mer på att energieffektivisera sina verksamheter då det finns både ekonomiska och miljömässiga vinster i detta. För att minska energiförbrukningen i samhället är det bra att börja med dess infrastruktur. För att funktionen hos ett avloppsreningsverk ska vara god samtidigt som energikostnaderna hålls nere är bland annat valet av rätt pumpar och blåsmaskiner för den aktuella driftsituationen av största vikt. Att hitta balansen mellan funktion och energieffektivitet hos en kombination av maskiner är dock ett tidskrävande arbete. Genom två fallstudier och matematisk modellering var syftet med detta examensarbete att bestämma huruvida det är möjligt att grovt uppskatta livscykelkostnaden hos olika kombinationer av pumpar och blåsmaskiner i varierande driftsituationer.

This report describes how a syringe pumpwas developed for Q-linea AB inUppsala Science Park as a bachelor´sthesis at Uppsala University. Thepurpose of the syringe pump is toreplace existing pumps in one of Qlineasdosage instruments. The reasons for whythe pumps are replaced are that they arebig and heavy. Therefore the task was todesign a smaller and lighter syringepump.The goal of the project was to create aprototype of the design that met themechanical requirements posed. Therequirements were met.In the report the work process can befollowed from the development of thespecifications to the final design andtests of the prototype.