The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Problem solving is a big part of design, however a lot of emphasis is put on creativity in research related to the effects of stress. Research has shown that the amount of stress we feel affects idea generation. Stress may also affect the ability to solve problems, however the researchers don?t seem to agree about what the effect of stress actually does.The study was made through experimental sessions where the respondents were asked to solve 4 matchstick puzzles of similar difficulty. Depending on their outcome they experienced more or less stress.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: The relation between alcohol and abdominal obesityAuthor: Anna Eriksson och Karin EdenholmSupervisor: Fredrik BertzExaminer: Ingrid LarssonProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: May 30, 2013Background: Abdominal obesity is a part of the metabolic syndrome, which has a worldwideprevalence of 20-25 %. The problem with abdominal obesity is the accumulation of visceraladipose tissue, which is an important risk factor for cardiovascular disease. Alcohol haseffects on metabolism, and can also lead to an increase in total energy intake; these twofactors can lead to an increase in accumulation of visceral fat. Besides this there are studiesthat show that a moderate alcohol intake could be good for your health. The context gets morecomplicated since different studies have shown contradictory results concerning theassociation between alcohol, different types of alcoholic beverages and measurements ofabdominal fat.Objective: The objective of this article review is to assess the evidence of whether alcoholintake is associated with accumulation of visceral adipose tissue, using the measurementswaist circumference (WC) and waist-hip ratio (WHR).Search strategy: The databases used in the literature study were PubMed and Scopus.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

Detta examensarbete är ett projekt som utförts på uppdrag av Sunnex Equipment AB. Syftet var att utveckla nya ledade armsystem till en medicinsk belysning för att ersätta de tre armsystemen som marknadsförs av företaget idag. Det var även önskvärt att projektet resulterar i ett förslag på utformning av ett tillhörande lamphuvud. Fokus har varit design och ergonomi. Arbetet har följt en strukturerad produktutvecklingsprocess som inleddes med informationsinsamling genom användarstudie, intervjuer, konkurrensanalys och litteraturstudier.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

This is a report for a bachelor degree thesis in electronics at Umeå university. The target was to design a fully functional PCB-layout and then solder components to it. In order to do that I had to first proofread a schematic of the system to find things that were not correct and correct them. The project is a cooperation between the author and the company Calmon Stegmotorteknik. During the whole project the people at Calmon supported the author with the appropriate knowledge to complete the tasks.

Simulation means running a model of a system with suitable input and observing the corresponding output. Real-time environment simulation is a special kind of simulation used to simulate a control system's environment in real-time. This is done to test the control system before it is used in its real environment. In this project, computer simulation of a certain kind of environments, called track-based systems, is studied and a general model for track-based systems is developed. In this model, track layouts are represented by graphs, which is a flexible and extensible representation and a method for visualizing these layouts is presented.

Earlier models that measured de facto harmonization of international accounting mainly used indices and other related statistical models. Those approaches do not account for the relative importance of individual balance sheet items or expense items being harmonized. This paper therefore proposes a different approach using Runsten?s (1998) permanent measurement bias model. That way it is possible to quantify the harmonization process by accounting for differences among companies.

The general objective of this qualitative study is to analyse and describe what people with psychiatric disabilities write on their blogs about their encounters with social workers. The questions the study is aiming to answer are: How do people with psychiatric disabilities describe their encounters with social workers? Do the informants describe instances of paternalism and advocacy? How do the informants describe their sense of meaningfulness, comprehensibility and manageability? The study is based on a theoretical framework in which empowerment and sense of coherence (SOC) are the key elements, along with the concepts of paternalism and advocacy as well as meaningfulness, comprehensibility and manageability. The research data was collected from blogs on to the blog forum Psykiatrin.blogg.se ? psykiatrins Robin Hood (meaning ?the Robin Hood of psychiatry?).

Webbdesign är ett hantverk med potential till oändlig variation och oräkneliga möjligheter, men det är även en process styrd av standarder och förhållningssätt för att optimera resultatet för slutanvändaren. Begrepp så som user experience och framför allt user experience design har i och med utvecklingen blivit allt viktigare aktörer inom webbdesign. Samtidigt som de underlättar i utvecklingsprocessen genom att diktera hur design bör utformas, skapar de inte också då begränsningar av potentialen för webbdesign? Antalet variationer och möjligheter minskar drastiskt när webbdesigners anpassar sig efter dessa standarder.Den här undersökningen syftar till att utveckla nya metoder och strategier för att främja innovativ webbdesign och undersöka hur modebranschens konstanta strävan efter innovation skulle kunna inspirera och kanske till och med förändra webbdesign utvecklingen. Genom att bryta ner, analysera och sammanfoga designprocesserna för haute couture och webbdesign skapas en designmetod som ger medvetenhet i designval och hjälper att ifrågasätta standarder samt att undersöka alternativa lösningar.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Background: Peripheral arterial disease (PAD), as a consequence of atherosclerosis in the arteria of the limbs, affects one of ten Swedes older than 65. PAD can develop slowly and silently, and involves an increased risk for cardiac infarction and stroke. Measurement of the patient´s ankle blood pressure and calculation of the ankle-brachial index is an evidence-based method to discover PAD. Objective: To investigate how district nurses and general practitioners perceive this method of examination and experience possible obstacles to why it is not more commonly applied at primary health care centres. Method: Data collected by semi-structured interviews have been processed by qualitative content analysis with a manifest onset.

The report is the result of a master thesis at ENEA AB during the fall of 2009. Itaims to create a specification of flash memory management system which focuseson power efficiency and low RAM usage for embedded systems, and to design andimplement a prototype of such a system to facilitate further development toward thecreated specification. The system used by ENEA today is a Flash Translation Layer(FTL). It has a complex structure which prohibits modifications and customization,therefore a new flash memory management system needs to be developed.The suggested solution uses a translation layer called Metadata FTL (MFTL), wherefile system metadata and userdata are separated from each other in order to improveperformance. The partition holding userdata uses a block-level mapped translationlayer system called Fully Associative Sector Translation FTL.

Ian Thompson menar att man, vid gestaltning, bör ha som mål att slutresultatet ska inneha höga värden av ekologiska, sociala och estetiska kvaliteteter. Detta benämner han som trivalent design, något som han menar att generellt innebär bättre design än uni- eller bivalent design där endast en respektive två av dimensionerna ovan tas i beaktande. I detta arbete är syftet att ta fram ett programförslag för ett bostadsområde i Södra Lillängen i Mariehamn och samtidigt undersöka trivalent design som hjälpmedel för landskapsarkitekten. Frågeställningen som använts är hur ekologiska, sociala och estetiska dimensioner kan bevaras och gestaltas vid en exploatering av Södra Lillängen. Arbetet har delats upp i en förstudie och en programförslagsdel. Förstudien bestod av en inventering, en art- och habitatsundersökning och en analys. Under inventeringen studerades området och omgivningen för att ta reda på vad som fanns på och omkring platsen idag.