This thesis work is a 30hp D-level assignment in design as a co-operation between MälardalenUniversity and Scania CV AB in Södertälje. The purpose was to develope a close fitted catwalk.The market has seen an increasing value for these types of applications and have the ambition to keep up with the rest of the competitors. The catwalks of todays standards shall be estetical attractive, have a non slippery surface and be costefficient.While working with this project I have spent a lot of time with the concept proposals and with the evaluation of the concepts, resulting in a final CAD model and a approximation of the cost estimate. The new catwalk fulfils all the new recommendations and rules as sharp edges, ADR, the height of the stepup and a non slippery surface with built in drainage..

The purpose of this study is to the increase knowledge and understanding of the meeting between children with Arabian as native language and a Swedish school library. The study is made as a qualitative investigation built on interviews with eight-year-olds and eleven-year-olds. Only the childrens needs and views are considered. The study is centred on twelve key issues and aims to document the childrens thoughts and views of reading as well as their reading habits and their use of the school library. Through the childrens own words their evaluation of reading and literature, their abilities to assimilate the text and their de facto use of the books can be known.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

At present day there are several different methods for measuring of paved surfaces.The most common methods today are measuring with a total station, the GlobalNavigation Satellite System (GNSS) and terrestrial laser scanning (TLS). Recently thedevelopment of unmanned aerial vehicles, known as drones, has increasedexponentially and today there are several ways of using drones for measuring surfacesby photographing and laser scanning.This thesis contains a comparison between the methods terrestrial laser scanning(TLS), and unmanned aerial vehicle photogrammetry (UAV). The measurements havebeen applied on two different test surfaces, one of asphalt and one of gravel. Thepurpose of the comparison is to investigate whether the airborne photogrammetry isequivalent accurate in its height levels as the terrestrial laser scanning. For thecomparison to be more extensive, these two methods have not only been comparedin precision but also in the areas of ease of use and economy.The precision was analyzed by comparing the height levels in randomly placed controlpoints on the test surfaces.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

The present BSc thesis is part of a newly established collaboration between the Swedish zoo Skansen and Kenya Wildlife Service (KWS), and constitutes of an inventory of the Nairobi Animal Orphanage (AO). As a refuge for wild animals found orphaned, abandoned or injured throughout Kenya, the AO has grown over the years and reached an unsustainable point where external help is needed for solutions and improvements. The aim of the inventory is to specifically consider the husbandry and enclosures of spotted hyena (Crocuta crocuta), serval (Felis serval), Sykes? monkey (Cercopithecus albogularis) and vervet monkey (Chlorocebus aethiops) and with the aid of facts about the species, estimate how well their biological needs are satisfied. Different educational elements are also reviewed since one of the main purposes of the AO is for education.

The essay discusses a process of change at probationservice office. The purpose of the change was to decrease specialisation and increase flexibility of the probation officers. The change encountered several problems where the correctional supervisor was percieved to act unsurely and indecisively whilst parts of the staff constructed and implimented several courses of action to prevent the process of change..

Corporate Social Responsibility (CSR), även kallad hållbar utveckling och ansvarsfullt företagande, var en term som började användas i slutet av 60-talet. Det är en arbetsmodell där syftet är att få företag ta ansvar för verksamheten och uppmuntra till en positiv inverkan på miljön, marknaden, samhället och anställda. CSR fungerar som en inbyggd självreglerande mekanism, genom vilket ett företag kontrollerar och håller sig uppdaterade beträffande de aktiva lagarna inom internationella normer och etik. Boliden lägger stort fokus och engagemang inom CSR- relaterade frågor. Blan annat har Boliden stärkt företagets CSR- engagemang genom att starta projektet Evaluation of Business Partner (EBP). Ett av huvudmålen med EBP är att höja standarden och öka medvetenheten angående mänskliga rättigheter bland sina affärs- och samarbetspartners.

The Innovation- and Design Engineer program at Karlstad university is a three year long engineer education. In the last phase a final piece is to be done and in this case Boda Borg in Skellefteå is the company in need of product development. Boda Borg is a company in the experience industry and they are located in nine cities from Gällivare in the north of Sweden to Karlskrona in the south. Boda Borg is a franchise company where every facility is their own. As a visitor you will experience physical challenges as well as intellectual in adventure rooms which are serial linked.

Following paper deals with the questions about prehistorian and medieval settlements in the Mälar Valley and their relations to the historically known hamlets or single farmsteads from the 17th- and 18th-century cadastral maps. Models over settlement development through the period A.D 200 to 1700 done by geographers Ulf Sporrong and Dan Carlsson are tested and compared to the knowledge won by recent archaeological excavations. Is there a connection between the older settlements linked together by dry-stone walls and the late Iron Age settlements? Does the picture differ from the one presented for the Gotland region? How well are the general theories about different settlement development depending on basic natural conditions as for the potentials for cultivation and topography, corresponding to the physical remains?  Are there other factors involved when the settlement structure takes its form?The methods that are used here constitutes mainly of a comparison between different locations in the Mälar Valley that has got a well known prehistory thanks to extensive archaeological excavations. Cadastral maps, soilmaps, topography maps and maps over ancient monuments are intertwined to the same map and analyzed through works in Geographical information systems.The results of this study reveal an interesting suspicion in the continuity-question through the Iron Age.

The Innovation- and Design Engineer program at Karlstad university is a three year long engineer education. In the last phase a final piece is to be done and in this case Boda Borg in Skellefteå is the company in need of product development. Boda Borg is a company in the experience industry and they are located in nine cities from Gällivare in the north of Sweden to Karlskrona in the south. Boda Borg is a franchise company where every facility is their own. As a visitor you will experience physical challenges as well as intellectual in adventure rooms which are serial linked.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

This is a bachelor essay in business and administration with concentration in accounting. The purpose of the essay is to describe and analyse how an auditor, who has had a close cooperation with a small owner-led company in several years, can obstruct the specific familiarity-threat and if it appears, secure that it does not affect the independence of the auditor.The conclusion of this essay contains two models which intend to describe how an auditor, as a suggestion, can obstruct the specific friendship-threat and if it appears secure the independence of the auditor..

The aim is to develop a new decision-making model for credit-loans. The model will be specific for credit applicants of the OKQ8 bank, becauseit is based on data of earlier applicants of credit from the client (the bank). The final model is, in effect, functional enough to use informationabout a new applicant as input, and predict the outcome to either the good risk group or the bad risk group based on the applicant?s properties.The prediction may then lay the foundation for the decision to grant or deny credit loan.Because of the skewed distribution in the response variable, different sampling techniques are evaluated. These include oversampling with SMOTE, random undersampling and pure oversampling in the form of scalar weighting of the minority class.