This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

This work has been made in cooperation with the municipality of Eslöv and the inventory area is a part of the deepening of the municipality plan of east Eslöv. The aim of the work is to test the principle of balance in the overall planning. Later in the detailed planning process a more detailed calculation is made and a suggestion of suitable measures for compensation is made. Then the method with green area factors can be used. The goal is to balance the negative influence on the environment from the planned impacts to gain a sustainable development of the city. The principle of balance means that the one responsible for the development also has to compensate for the negative impacts on nature and landscape that comes with the development.

The essay discusses a process of change at probationservice office. The purpose of the change was to decrease specialisation and increase flexibility of the probation officers. The change encountered several problems where the correctional supervisor was percieved to act unsurely and indecisively whilst parts of the staff constructed and implimented several courses of action to prevent the process of change..

The travel agencies exist on a market that is distinguished by increasing competition. A majority of the travel agencies offer different services that all satisfie the same customer need. However,one major difference in the market aspect is the service quality, this making it an important mean of competition. There are several acknowledged methods of measurement when it comes to service quality and it is important to use an instrument that takes into consideration the fact that charter tours is a complex merger of several services. The purpose of this essay is to establish if the SERVQUAL method is a suitable instrument for measuring service quality in the travelindustry.

Kursutvärderingar kan ge svar på många frågor, och leda till ett väl motiverat förbättrings- och utvecklingsarbete. De kan även vara mycket svåra att genomföra. Forskning visar att utvärderingar ofta saknar tydliga mål, vilket leder till att resultaten blir svåra att använda. I detta examensarbete diskuteras kursutvärderingarna på företaget Kärnkraftsäkerhet och Utbildning. Målet är att arbetet ska leda till elevenkäter och undersökningsresultat som kan bidra till utvecklingen av kurserna vid Kärnkraftsäkerhet och Utbildning i Barsebäck.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

The purpose of this study was to look into how evidence evaluation in verdicts considering 2 § LVU (Care of Young Persons Act) linked to honor related problems are handled by the County Administrative Court of Stockholm. The questions at issue were how the County Administrative Court handles the prerequisites regarding 2 § LVU verdicts, how the County Administrative Court proceeds when evaluating evidence in 2 § LVU verdicts, and how the County Administrative Court handles indications of that a child is living in an honor-related context. To answer this, five verdicts have been analyzed. In addition to this, two interviews were made as a complement. In the analysis of the collected material, the authors proceeded from a theory of evidence and used a hermeneutic method for the analysis.

Influenza is a viral infection that affects global health and economy with its endemic and sometimes pandemic spread. Rapid detection of Influenza viruses enables antiviral use and can bring financial savings. It is also essential for the global surveillance of prevalent Influenza strains. RT-PCR is considered the most specific and sensitive method for detection of Influenza, but Influenza mutates at a high rate and it is therefore crucial that RT-PCR methods are updated regularly.In 2014, Cepheid released their Xpert Flu/RSV XC assay, which can detect Influenza A and B and RSV by multiplex RT-PCR in approximately one hour. The aim of this study was to evaluate this assay at Laboratoriemedicin Västernorrland by using the laboratory?s previous PCR assay for detection of Influenza viruses as reference method.Real-time RT-PCR was used to compare Xpert Flu/RSV XC to the reference method.

Chronic illness is associated with conditions that may result in psychological ill-health in the adolescence. Consequently there is a need for development of preventive psychosocial support interventions for this target group. The objective was to develop, implement, and evaluate the effect of supportive intervention group program for teenagers suffering from chronic illness - aiming at increasing quality of life and supporting mental and physical health. Method: Six different intervention groups were conducted between 2007 and 2011, age 13?17.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

The purpose of this paper is to examine the three main translation methods used in experimental Cross-language Information Retrieval CLIR research today, namely translation using either machine-readable dictionaries, machine translation systems or corpus-based methods. Working notes from research groups participating in the Text Retrieval Conference TREC and the Cross-Language Evaluation Forum CLEF between 1997 and 2000 have provided the main source material used to discuss the possible advantages and drawbacks that each method presents. It appears that all three approaches have their pros and cons, and because the different researchers tend to favour their own chosen method, it is not possible to establish a "winner approach" to CLIR translation by studying the working notes alone. One should remember however that the present interest in cross-language-applications of information retrieval has arisen as late as in the 1990s, and thus the research is yet in its early stages. The methods discussed in this paper may well be improved, or perhaps replaced by others in the future..

Most Swedish Warmbloods are bred by artificial insemination (AI). Quality control of the semen consists of the subjective evaluation of motility. There is a need for a more accurate and objective method of rating the semen. In this study we compared fluorometry with flowcytometry as a method for evaluating sperm viability. Semen was collected from three stallions, stationed at Markebäcks Gård, Askersund, three times during week 15 and week 34, 2008.

This essay presents a business plan for the idea of a Pet Shop in Stockholm. The initial purpose of the essay was to investigate weather the company would be financially profitable or not. During the process we encountered problems and pitfalls that we felt contributed to the fact that our business idea is yet not realized. Therefore the second purpose of describing the process that an entrepreneur goes through when starting a new business came about. Besides the business plan for Pet Shop we present a selection of the theories that we found relevant for our situation, among others behaviour of entrepreneurial teams, network theory and execution.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

Identification of fungi is based on macroscopic observations of morphology and microscopic characteristics. These conventional methods are time-consuming and requires expert knowledge. For the past years Matrix-assisted laser desorption ionization-time of flight mass spectrometry has been used for routine bacterial identification in clinical laboratories but not yet in the same extension for fungi. In this study three preanalytic preparation methods for fungi were evaluated in order to shorten the processing time in routine laboratory performance.Clinically relevant strains (n=18) of molds and dermatophytes were cultivated on agar plates and prepared according to the different preparation methods for protein extraction. Each strain was analyzed in quadruplicate by the MALDI Biotyper and the database Filamentous Fungi Library 1.0.The results showed that the genus and species identification rates of the least time-consuming direct extraction method were 33% and 11% respectively.