The dissertation deals with an account of actual problem, which can arise within EMC and power quality. The cause of power interruption and what can be done to minimise the power interruption is discussed. It also includes a definition of planning levels and which factors one needs to have control over to carry out a possible planning strategy and how the local distributions net could be more secure. The electrical net could be secure but no system can be free from interruption.The dissertation examines two distribution transformers: GLA40T1 (Glansås) and T399 in Tranås Energy which don?t have regulators.

The Energy Performance Certification in Sweden was developed as a tool to achieve the Government's target to reduce Sweden's energy consumption by 20 percent by 2020. The Energy Performance Certificate has previously received some criticism for not fulfilling its purpose. Questions that formed the basis for this report is how the energy performance certification provides support to buyers of single-family houses and if the energy performance improved in terms of reliability. The report begins with a background description that describes how the energy declaration works and some of the findings of previous evaluations and surveys. A survey to investigate the broker's position to energy performance have been conducted as well as interviews with buyers and sellers of houses. An investigation whether the energy performance can vary between different calculation programs, depending on various assumptions made by the energy declarant, has been made.Brokers and sellers have proved negative attitudes towards energy performance, particularly brokers.

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

This thesis treats the normative power of the European Union and its affect on Macedonia. The main purpose has been to look closer with the use of the application of Ian Manners theory of normative power on the Macedonian case. The focus will be to answer the following questions: Does the European Union act as a normative power in relation to Macedonia, if so, how are these values diffused? Has there been any effect of the spreading of these values? Based on six interviews and the available material of European Union strategies for the Macedonian membership I have attempted to understand to what extent the European Union?s normative power has had an influence in Macedonia. The result of my analysis is confirmation of the European Union as a normative power in Macedonia and the understanding of the methods of application..

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

The intention of this study is to perform a content analysis based on a theoretical framework founded on multi-level governance, MLG. The thesis examines the formal changes within employment politics between 1999 and 2004 (Sweden´s action plan for employment) and 1998 and 2007 (the spring budget proposition). I will investigate how multi-level governance has effected the Swedish employment politics. Furthermore, the purpose of the thesis and the questions under consideration are: How have the formal structures within Swedish employment politics changed since Sweden?s admission to the European union, particularly during the periods 1997-2008 and 1999-2004? And: How do the changes in Sweden, together with the European union directive concerning employment, coincide in the so-called employment strategy?While performing the analysis I have focused on multi-level governance.

During the last decades the housing sector has increased continuously, and housings and services accounted for 40 % of the energy usage in Sweden during 2011. The expansion in number of buildings in society has resulted in an increase in both energy usage and emissions of greenhouse gases. It is crucial to enable a sustainable development of society and as a result, the demand to reduce the emissions of carbon dioxide is a current question. In this study, the carbon dioxide emitted from the housing sector in Stockholm is estimated. The housing sector can be divided into different types of houses such as apartment blocks, single-family houses and holiday houses. By collecting information of the energy purchased in respective households, a computational model is generated that calculates the total emission of carbon dioxide.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

With a larger awareness of the climate changes and increasing electricity prices, energy efficiency measures in the industry have become more common. By rationalize the activity and by the same time decrease the emission of greenhouse gases the company can both save money and reduce negative environmental impact. For the Swedish industries the electricity price have traditional been relative low, which has resulted in a considerable larger usage than other European countries. By a deregulation of the European electricity market the electricity price will level off between the countries, which will cause a higher electricity price in Sweden than we are use to. To prevent that the Swedish industry don?t lose competitiveness against the other European countries, it will require energy efficiency activities in all different forms.ABB Sweden has decided to decrease their total energy usage with five percent in two years.

Today equal representation between the genders in parliament is something to be desired. One way to reach the goal of equal representation is by using quotas. The purpose of the study is to research the lack of equality in elected institutions by using a perspective on qoutas.  The study also seeks to find answers to if using quotas is a good method according to gender studies. A text analysis is being used to find reasonable solutions to the study´s presented complivations.  By analyzing different texts about quotas some of the more common arguments in the discussion about using quotas in parliaments were highlighted. Some of the more frequent arguments to implement quotas are that it would be more just but also that women and men may have different interests, experiences and therefore equal representation would be a question of resources.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

How to use automatically read data to create a method that visually describes how energy is used in a building, the so called energy signature..

Solar energy is the one most talked about among energy sources due to its huge potential amongst renewable energy technologies. A greater use of the solar energy may be the solution to today's climate threats. Normally there are two different types of solar technologies, solar cells and solar thermal collectors. Solar cells convert solar energy in to electricity whilst solar thermal collectors convert solar energy into heat, which can be used to heat hot water for households. This goal of this study has been to investigate the possibility of implementing solar energy into the energy system of Kista Galleria, one of Sweden's foremost venues.

The aim with this paper is to study how the integrational ideology of the Swedish parliaments party platforms, including the right wing Sverigedemokraterna, is formulated. The integration theories examined are assimilationism, multiculturalism, universalism and residualism. In turn these theories are simultaneously applied to the party platforms extracting explicit or implicit messages of the four former mentioned theories. The Swedish history of integration as well as immigration, which per capita is one of the highest in the European union, pinpoints the reason why this subject is due to further investigation. The results show that most of the parties contain traces of more than one integration theory, with the exception of primarily Sverigedemokraterna which focuses on assimilationism.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..