This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

When new land use policies are made, opinions of stakeholders need to be taken in account, to avoid future conflicts. The motivations of commercial enterprises are often clear and easily communicated but due to inaccessibility and language barriers the indigenous people?s perspectives and needs are harder to reveal. This study therefore aims to identify species and sites of importance for the local people in Masihulan village on Seram Island, East Indonesia. This is a first step to facilitate better integration of local people´s needs into local government decision-making processes.Researchers at the Center of International Forestry Research (CIFOR), with headquarter in Indonesia, have developed an approached called ?Multidisciplinary Landscape Assessment? that aims to assess important natural resources for local communities in tropical countries.

The level of neonate mortality in a free ranging fallow deer (Dama dama) population at the Koberg estate in south western Sweden was investigated using radio-tracking techniques. During this study a total of 36 fawns (17 ?, 19 ?) were captured and marked with vhf or gps radio collars; 12 fawns in 2008 and 24 fawns in 2009. The neonate mortality calculated by the Kaplan-Meier method was 23.6 % and the mortality caused by predation was low, since only 1 of 8 non-surviving fawns died from predation by red fox (Vulpes vulpes). The spatial behavior of the fallow deer neonates were examined at two different levels i.e.

In the tropics, logging and wild fire can result in degraded secondary forests with lower biodiversity than in the natural forest. One way to limit forest degradation is to rehabilitate the present large areas of secondary forests. However, there is a lack of knowledge concerning the ecology of tropical tree species and further studies would be advantageous for future rehabilitation efforts of degraded rainforest. The objective of this study was to investigate how mother trees in secondary forest and different site factors affect the abundance and spatial distribution of natural regeneration of non-pioneer tree species in a tropical rainforest in Sabah, Malaysia. The study took place in the INIKEA Forest Rehabilitation Project area, which suffered from wild fire in 1983 and has been selectively logged over both before and after the fire. Natural regeneration and site variables were inventoried in plots, while mother trees were inventoried in the whole survey area.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

For my advanced degree in archival science, I have organised and catalogued two family archives; man Family Archives ("Gardtmanska släktarkivet") and the Hamnström Family Archives ("Hamnströmska säk- tarkivet"). Though both could be labelled "family archives", there were many differences between the two. The Gardtman Family Archives contained the records of several family members from a period of several centuries, spanning from the early 17th century, to the early 20th century. It was by far the larger of the two archives. A substantial part of the records consisted of documents regarding various agricultural estates the family had owned or been involved with in one way or another.

Resin-top disease is a rust fungi that occurs both as a host alternating form, Cronartium flaccidum G. Winter., and as a non-host alternating form, Peridermium pini Pers. The host alternating form can use a variety of hosts but the most commonly used species in the boreal forest is Melampyrum sylvaticum. In Scandinavia the Resin-top disease infect Scots pine, Pinus sylvestris L. The fungus infects the needles through the stomata and then grows through the branch to the stem where it strangulates the vessels transporting water and nutrition to the treetop, which kills the top.

Modern forestry management may disadvantage some mykorrhiza forming fungi because; they are dependent on late successions and cannot survive the constantly recurring breaks in the continuity of their host tree. For this study the specie goliatmusseron (Tricholoma matsutake) was chosen to investigate this possibility. In Sweden T. matsutake is found in greatest amounts north of Örnsköldsvik on glacifluvial sandy soils in association with pine trees and reindeer lichens. Seventy two forest stands where the specie previously had been found were studied; 62 in the northern part of Sweden and ten in the southern. Several indicators were studied to find out if these stands have had a continuity of living trees.

Lack of dead wood is the main cause of decaying or loss of populations for many forest species. To increase the amount of dead wood is a prerequisite to maintain biodiversity in forests of northern Europe. In summer 2006 the recreation area Klåveröd, at Söderåsen in Skåne, Sweden, has been inventoried for high stumps (snags) of beech, (Fagus sylvatica). The result of the inventory has been compared with data of the real estate and forest management directories from the owner, region Skåne. The results have also been matched with the results from an inventory of saproxylic beetles in 2005, performed with windowtraps on selected snags both in the area and the adjacent national park Söderåsen. 594 snags were found on 747 ha.

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.

In this report I have compiled my thesis which was about investigating what sellers of real estates find important when they shall appoint a real estate agent. I have also looked into other parameters in my study, like whether the sellers at all use real estate agents and how they have proceeded in case they do not use an agent. In addition to that, I have tried to find out why sellers didn´t chose LRF Konsult and what they know about the company. This analyses was made through questionnaires sent to those estate owners who didn´t use LRF Konsult when they sold their estate. The questionnaires contained 8 questions.

The concentration and storage of organic chlorine and chloride were determined in soil, to a depth of 40 cm, in a coniferous forest in the Stubbetorp catchment area in south-east Sweden. Also, the spatial distribution of the two forms of chlorine was determined. Soil samples were collected at 49 of the nodes in a grid with approximately 105 m between the nodes. The analysis of spatial variability suggested that no spatial autocorrelation was present either within the variable organic chlorine or chloride. This means that no sample was more influenced by another nearby sample, as compared to other samples further away.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

Title: Pricing of IPO:s on the Swedish stock market Authors: Mikael Gustavsson Martin Kvist Henrik Wannberg Tutor: Anders Hederstierna Problem: There are certain sets of problems for underwriters when they are pricing potential stock-exchange companies. The problem partly consists of estimating the demand at an IPO and also to accurately value the business in comparison to the market. To set the price per share is problematic, since the company carrying out the public offering wants to optimise the amount of capital at the same time as they want the share to be subscribed in full. If the IPO would not be carried out, it could cause harm to the position of the underwriters. Purpose: To investigate whether underpricing exists associated with IPO:s on the Swedish market during the period 1995-1999. Method: The collection of data has been achieved by means of: Internet, E-mail and telephone calls. Conclusions: We have reached the conclusion that oversubscribing in comparison to the return at an IPO has an average growth of 3.3 per cent the first day, on every occasion of oversubscribing. For the studied population, including 138 initial public offerings, the average market value rise is 15 per cent the first day. When we made our calculations, adjustments have been made for the general index of Affärsvärlden (AFGX).