Abstract    Objective: The aim of the present study was to investigate if inclinometer Estimates of arm posture during paper mill work differed between periods of different arm visibility. The aim was also to identify strategies for and difficulties in assessing body-visibility on video. Methods: The study consisted of two parts, where part 1 aimed to investigate the validity of observation-based assessment of arm posture during paper mill work. Study 2 was a survey among people with experience in assessing the posture of paper mill workers from video. Results: The total time for the right upper arm visibility indicates that it was on average visible in 54%, partly visible 15 %  and not visible 31%.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

As scholars argue, there has been a rapid diffusion of civic integration policies in Western Europe the last decade. In the light of the debate about the extent of civic integration policies, recent studies have shown that the diffusion is limited to certain countries. Despite a flurry of literature based on civic integration policies, attention drawn to the implication of these policies has been quite inferior. This paper tries to examine what civic integration policies means in relation to immigration. Are civic integration policies used as an informal tool for the purpose of limiting certain groups of immigrants? I argue in this paper that the conditional factor in the civic integration policies creates a barrier for affected immigrants and their possibilities to gain long term residence.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

Background: Sweden and the rest of the world went through the biggest financial crisis at the end of 2008 since the 1930s. The major Swedish banks have goodwill related to their acquisitions inside and outside Scandinavia. Swedbank, SEB and Nordea has acquired in the Baltic countries and Russia, however Handelsbanken has established itself in Great Britain. The crisis in the Baltic countries led that real wages fell, unemployment rose, real estate prices collapsed and the number of borrowers who had trouble repaying their loans increased rapidly. All this led to the problem of impairment of goodwill in the Swedish banks that had expanded rapidly in the Baltic countries.Aim: The aim of this study is to investigate the application of IFRS 3 in Swedish banks before, during and after the financial crisis, and to investigate the low-downs in the four majorSwedish banks in 2006-2010.Completion: The study is primarily based on the case studies by the examination of the annual reports from all banks as well as evaluation of the interviews.The authors have chosen to makea strategic choice of a small number of cases through the concentration on the impairment of goodwill in the bank sector of Sweden.Results: The result of this study is that there are problems for banks in implementation of IFRS 3 in practice because of insufficient information in the banks' financial statements.Generous Estimates used in the calculation of impairment testing.

After a workshop in Kuopio held in June 2006, Interbull decided to go forward with the development of a system for beef international genetic evaluation and a three year project called Interbeef was launched in June 2007. The participating countries are so far limited to Europe and the only trait evaluated at present is adjusted weaning weight (weight at 200 days). The results from a first international genetic evaluation have been shared with the countries but are not yet official. The evaluation is based on data from purebred Charolais and Limousin. To achieve good Estimates of proofs in an international context it is important that methods for data validation and model selection are implemented.

The lack of housing in the Swedish metropolitan areas is today a well-known fact. This isespecially true for the region in and around Stockholm. Due to the large amount ofmunicipality-owned land within Stockholm municipality the area for many new housingprojects are acquired through land allocation. How much time this process of land allocationconsumes for a typical project is today not really known. Equally unknown is the exactoutcome of the process, i.e.

Eutrophication was recognized in the early 1900's and results in severe algal blooms, increased biomass production and eventually leads to an altered ecosystem. In Mälardalen we find the most eutrophic lakes. Most of the applied phosphorus and nitrogen into seas and oceans comes from agriculture, and the nutrients losses are affected by local weather conditions and soil type. Guidelines for storage and distribution of manure were introduced in the 80s, and the rules were strengthened January 1, 2010. Localities and previous county administrations can whether there are special reasons, grant an exemption for manure application during winter-periods despite the current ban.In this essay I have examined how many exemptions of manure application that has been granted at the Sagån river, and what implications it has for the eutrophication of Lake Mälaren.

The objective of this paper is to estimate monetary and non-monetary costs for the huntercaused by deer-vehicle collisions in Sweden. These costs include losses in hunting value as wellas time and money efforts related to the handling of wildlife casualties. The calculations arebased on available statistics from 2004 on deer-vehicle collisions involving moose, deer, roedeerand wild boar and on telephone interviews with hunters involved in the tracking of injuredanimals. Altogether, the annual loss in hunting value for moose was assessed to approximately30 million SEK based on the 2004 accident statistics. For roe-deer and fallow deer, thecorresponding figure was approximately 56 million SEK and 1.2 million SEK, while wild boaraccounted for 1.3 million SEK, respectively.

Radon is a hazardous substance that cannot be perceived by our senses. It has long been known that exposure to high radon levels for a long period of time will ultimately cause lung cancer. The Swedish Radiation Safety Authority Estimates that 500 people die annually due to this. Although most of them are smokers, even non-smokers suffer from lung cancer caused by radon. The statutory value for radon in homes today is 200 Bq/m³.

The industrialization in Sweden has increased the large number of areas that have been contaminated with various types of pollution. One of those sites are the property Höjen 3:24 in Arboga where ?Arboga Mekaniska Verkstad? once been. The property wants to increase the use of the old former foundry building with the adjacent ?plate-workshop? and believe there are two options for the building: That the building either should be used as a warehouse/concert hall, or rebuilt into a cultural center. An environmental evaluation has shown that the levels of heavy metals are over the Swedish environmental protection agency guidelines of less sensitive land.

Outages in the electric grid can be costly for society. Because of this, reliability is one of the parameters used to regulate network companies. Reliability in electrical grids can be measured with SAIDI, system average interruption duration index, which for Fortum Distribution has increased in Stockholm?s distribution network (11 kV) in the early 2000?s.By using outage data for Stockholm from 2011-2013, sets of parameters to be used for reliability calculations in the network information program Tekla NIS were derived. Two different options for investment were then analysed: changing old cables with high fault frequencies, and installing automatic switching in distribution substations.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

This report describes a project carried out in cooperation with Klippan Safety AB. The purpose of this project has been to develop a product that facilitates the living area in a truck cabin for the customers. To be able to develop, in a structured way, that kind of product, the project has been based on different product development theories. The project contained of following parts: marketing research, product generation, product evaluation and prototyping. After information from the marketing research and discussions with the company, the decision was made that the task was going to consist an improvement of the existing product referred to as 'the comfort module'.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.