This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

This study examines retail atmospherics from a reality perspective. The topic "special exposure" has received research interest in the past but it has not been recognized as a critical consideration in the daily retail business. Too many retailers leave assortment decisions to thumb rules or trial and error. The highest aim of this study is in addressing that gap between theory and practice. To catch the attention of the customer is important in supermarkets because most grocery purchase decisions are made at the point of purchase.

The aim of this study was to examine if the predictions of the herbage quality in the software Grazemore Decision Support System (DSS) gives a reliable ground for milk production in the north of Scandinavia. Pasture samples from one research farm (Umeå) and one organic farm (Nordingrå) was analysed on crude protein and organic matter digestibility. The results were statistically compared to the predicted values. Measured and predicted herbage mass was compared and a control if the predictions of milk production improved if the predicted input were replaced by the values from the analysis, was made. The concentration of crude protein was underestimated by the model on both farms and the relationship between actual and predicted values was poor. Mean Prediction Error (MPE) was 24% and 31% respectively.

Modern semiconductor design methods makes it possible to design increasingly complex system-on-a-chips (SOCs). Testing such SOCs becomes highly expensive due to the rapidly increasing test data volumes with longer test times as a result. Several approaches exist to compress the test stimuli and where hardware is added for decompression. This master?s thesis presents a test data compression method based on a modified facsimile code.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

Several studies have shown that people misjudge and fail to correctly combine probabilities. An explanation for these tendencies is the conjunction fallacy. Basically, the conjunction fallacy refers to violations of the conjunction rule, which states that the probability of a combination of two independent events (A & B) cannot exceed the probability of neither event (A or B). In connection with the growth of the Swedish gambling market and the fact that betting is an everyday-event containing well-defined probabilities, it is considered to be both up-to-date and relevant to study whether the conjunction fallacy also occurs in betting. Previous studies have shown that people fall victims of the conjunction error, however, only in controlled laboratory settings.

De senaste åren har det skett stora framsteg i byggbranschen från sedvanlig byggprojektering till avancerad BIM-projektering. Resultatet av denna studie visar att trots den hastiga utvecklingen så utförs det fortfarande mängdavtagningar ur 2D-ritningar. Detta på grund av problem som uppstår vid mängdavtagningar ur objektbaserade 3D-modeller. Mängdlistorna ur objektbaserade 3D-modeller stämmer inte alltid överens med mängdlistorna ur 2D-ritningar. Detta leder i sin tur till nödvändiga och tidskrävande manuella mängdavtagningskontroller ur pappersritningar.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

An attempt were made to record the 1st movement of Beethoven?s Op. 57, with the objective of performing it as close to Beethoven?s will as possible, in the tradition of the ?historically informed performance? movement.The result of evaluating source material rendered a list of the most relevant material for this study, and hopefully that might prove useful for other studies with similar objective concering HIP and composer-intention based ?autenticity?.However, Beethoven?s will was only vaguely captured in the limited source material accounted for in this study, rendering it moderate-to-small reliability. It?s probably possible to achieve a higher degree of goal achievement, given more time and through the utilization of music psychology to further extrapolate the detailed parameters of Beethoven?s presumed extramusical will.The recording made was not to my satisfaction and has strengthened my view that the interpreter should take council from the collected knowledge of scholarly sources but must ultimately remain free in whether and how to utilize that knowledge.Lastly, I?ve measured the bpm in the resulting recording with a error margin of ±0,02 s.

AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

Two ecological models of nitrogen processes in treatment wetlands have been evaluated and compared. These models have been implemented, simulated, and visualized in the Modelica language. The differences and similarities between the Modelica modeling environment used in this thesis and other environments or tools for ecological modeling have been evaluated. The modeling tools evaluated are PowerSim, Simile, Stella, the MathModelica Model Editor, and WEST. The evaluation and the analysis have been performed using McCall?s factors for software quality (McCall et al, 1977), a correlation analysis and the Constant Comparative Method (Glaser&Strauss, 1999).

This Master Thesis has been conducted as an assignment of the Swedish Defence MaterialAdministration and the Swedish Armed Forces and aims to examine the Target Location Error(TLE) of a Forward Observer System. The targeting accuracy of the system is vital if the systemis to be used as a sensor for precision munitions. The analyzed system, EOI (FOI 2000), wasdelivered to the Swedish Armed Forces in 2007. The targeting sequence starts with deciding theposition of the system with a GPS-receiver, continues with methods where the north direction issettled and ends by measuring the distance, direction and elevation to the target. When allparameters have been measured the system calculates the position of the target.

The aim of the study is twofold, to generate a sensory profile of Swedish wine today and to investigate the opinion of both wine producers and wine experts on viticulture in Sweden and wine from grapes grown in Sweden, achieved through a contextual analysis comprising a literature study and interviews with wine producers in Sweden and Denmark and wine experts from Sweden and Germany, and a sensory analysis at the company Ipsos. ?Mixed methods? was the chosen research strategy as the semi-structured interviews gave qualitative results and the sensory analysis would give quantitative results displayed as spider charts. There is a lack of studies investigating how the Swedish wine is perceived by consumers and consumers might be unaware that the Swedish wine, established through ?trial and error?, is increasing in quality every season, creating a need to display the sensory profile of Swedish wine to strengthening the perception of Swedish white wine. This study shows that the Swedish white wine today is a wine with a fresh, citrusy and flowery aroma and a fresh, citrusy and green apple taste, however, a sensory analysis cannot show if the attributes are those that are desired by the customer, a consumer test is necessary to conclude that. Trends point towards locally produced products, one reason why Swedish wine has great potential, yet the future needs to be secured through job opportunities and education. Creating an approval system for Swedish wine is suggested as a future improvement, it is a common procedure in most wine regions.

This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.