The purpose of this essay is to investigate what kind of motives where behind the long term decisions for the Swedish military defense in 2000 and 2004. This leads to the questions that the essay is meant to answer; 1. Were the motives behind the two decisions for the Swedish military defense of economic character or an adjustment of security and defense policy? 2. Was the parliament united in the two decisions and if they were not, why? 3.

This degree project has been carried out on the commission of AB Borlänge Energi. The purpose of thisproject was to redesign the magazine Energitrycket. The magazine should inform about the current eventsat the company. The work consisted of redesign of the existing magazine and adjustment to copying andpublishing on the web.This project also contains a research about how paper and colour affect the print results. It shows thatthe maximum contrast and sharp image reproduction is best achieved on woodfree, coated, calenderedpaper with high whiteness.

The purpose of this essay is to investigate what kind of motives where behind the long term decisions for the Swedish military defense in 2000 and 2004. This leads to the questions that the essay is meant to answer; 1. Were the motives behind the two decisions for the Swedish military defense of economic character or an adjustment of security and defense policy? 2. Was the parliament united in the two decisions and if they were not, why? 3.

Electrooculogram (EOG) data was used to develop, adjust and validate a method for drowsiness detection in drivers. The drowsiness detection was based on changes in blink behaviour and classification was made on a four graded scale. The purpose was to detect early signs of drowsiness in order to warn a driver. MATLAB was used for implementation. For adjustment and validatation, two different reference measures were used; driver reported ratings of drowsiness and an electroencephalogram (EEG) based scoring scale.

Surface lift adapted for today?s user Today?s T-bar lift looks almost the same as when it was launched in 1938, even though a lot has happened in the ski and mountain industries. New equipment has developed without any major adjustment to the lift. Snowboard, sit ski and downhill biking are just some examples of the evolution that demands new seating positions. It?s also very common for families to spend their holidays in the mountains nowadays.

This report summarizes a Bachelor Degree Project in Integrated Product Development, carried out during the fall 2007 till spring 2008 by three students at the Product Design Engineering Program at the University of Skövde. The project was performed in cooperation with Lundbergs Möbler AB in Tibro. Lundbergs wants to start selling furniture to the public eldercare. The purpose of this project was to adjust one of their chairs. The project layout was to first make a preliminary investigation where the market, competitors? assortment and the purchasing process are studied.

The task was to deliver a solution that could be implemented in today?s production of the FH truck. To make the project successful it was most important that the end result had a high maturity level. For that reason an analysis of ergonomic, laws and regulations, and possible materials where conducted. To show that this project is profitable and can be realized a ruff cost estimated of material and tools is added to the research.

Polaris Eyewear is one of the world's leading companies in innovative eyeweardesign. My assignment has been to, in collaboration with them, expand their range with a pair of children's glasses, while maintaining the innovative character they are so known for.The problem with childrens eyewear today is that most of the time the glasses tries to mimic the adult eyewear and the ?childish? type of designing is spared. From an ergonomic point of view, a child's nose is smaller than an adults and therefore needs a different type of shape and nosebridge. In addition, children have softer ears, which means that they need a different type of shaftend as well.

The purpose of this thesis was to investigate different methods do measure velocity of pistons in pneumatic cylinders at Bosch Rexroth Teknik AB. Through information of velocity the adjustment of a cylinders damping can be done easier.A future transducer will be used by salesmen, service personnel and customers. This requires a sensor that is easy to apply and use. It is also desirable that the sensor is cheap. A number of possible methods to measure velocity have been presented.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

Dione kullager AB is a company in Uppsala, which sell industrialmachinecomponents, transmissionsolutions and provides repair serviceof hydraulic components.When a hydraulic cylinder is about tobe repaired it needs to bedisassembled. Because hydrauliccylinders usually work in dirtyenvironments and are heavilyworn some types of cylinders arealmost impossible to disassemble.Today the disassemble is made by hand,which means extra work for themechanics. In order to facilitate thedismantling of this type of cylindersa machine is to be developed for thispurpose and this is where this thesisbegins.The thesis has been organized in threephases: Literature study in whichfacts and theories are acquired.Concept generation in which differentconcepts, calculations, and solutionswere identified and selected. Thedesign phase where all the differentconcepts of components were assembledand simulated in SolidWorks. Similarstructures have also been studied inorder to identify necessary functions.The thesis resulted in a structurewhich is believed to meet therequirements.

This is a qualitative study which purpose is to examine the experiences of the recovery process after a treatment for eating disorders.                                                         The questions we have decided to examine are; how did the women adapt to a healthier life after treatment, what are the women's perceived experiences of the aspects related to identity and identity work, and what external social influence was seen as important for their adjustment process to a healthier life?Methods: We have used computer-supported and semi-structured interviews. There were a total of nine women who took part in the study.                                                                                                                    Results: Majority of these women have been recovered from their eating disorders, but some still have major or minor problems. They found it rather difficult to adjust their life's without an eating disorder.Conclusions: Increased self-awarness led to greater control over the eating disorder. The women could begin to confer the new features that they identified with.

The aim of this thesis is to describe how service companies through adjustment of the customer?s zone of tolerance can influence customer?s perception of the service during the processes of service delivery and create customer satisfaction. The method used was case study approach utilizing personal interviews, which were conducted at two service companies. The study showed that the aspects of the service that have greatest importance for the customer?s assessment of the service and customer satisfaction among others are personal treatment and that personel behave in the way that makes the customer feel itself taken good care of and unique.

The main purpose of this stydy was to evaluate the Aurora clinic (for women afraid of birth/delivery) in the south of Sweden. Questionnaires were sent to 197 women who had contact with the Aurora clinic during 2007 and 2008. The group of participants contained both pregnant women and women who have given birth. A total of 136 women replied. The results showed that both the average age and the level of education of the women were high.

In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.