Sök:

Sökresultat:

2096 Uppsatser om Equipment for precision measurements in 3D for underwater applications - Sida 42 av 140

Band eller hjul? : Lämpligt fordon för EOD-specifika behov i Afghanistan.

The background to this paper is the events that have taken place in the Swedish area of responsibility in Afghanistan where Swedish troops have been ambushed by the insurgents. Although the troops primarily where riding in Toyota Land Cruisers they had no casualties. I think that the Swedish force needs other vehicles that can be armed and are armoured.When I compared three different types of armoured vehicles, I found that PTGB 6 is the vehicle of choice, according to the special needs that a Swedish EOD-squad, their task and their equipment have. .

Miljöanpassade tjänsteresor. En kvalitativ studie av privata aktörers resepolicy

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Arsenikförorenad mark efter träimpregnering : fastläggning, spridning och efterbehandling

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Anpassade energisystemlösningar för passivhus - med hänsyn till byggnadens värmekapacitet

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Effektivisering av kvävereduktionen i en konstruerad våtmark avsedd att behandla avloppsvatten

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Utformning av utskovskanaler och nedströmsslänter : En jämförelse av energidissipation vid överströmning av fyllnadsdammar

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Utveckling av personlyft till badkar

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

RUMSSTANDARDISERING : Ett projekteringsunderlag för Sandviks framtida byggnadsprojekt

The construction industry works today with a time limit, therefore it is important to have rational tools to improve the efficiency in the building process. That?s the reason for this report, where a standard for interior finishes has been developed for Sandvik. The standard for interior finishes is designed as a program for room functions and includes office space and sanitary areas. It is a proposal showing how Sandvik can design their premises in the future.

Riktlinjer för utformning av manualbilder till Volvo Construction Equipment : En studie av riktlinjer kring utformning av processuella instruktionsbilder

At Volvo Construction Equipment outside Eskilstuna a wide range of heavy equipment machines are developed that are used by a variety of industries worldwide. For the handling and maintenance of these machines a deep knowledge is often required. Volvo CE and their dealer Swecon offer courses for both drivers and technicians that last for 1-2 weeks. Out on the workplaces however, the knowledge from these courses need to be supplemented with information from the machine?s operator and repair manuals.

Applikationsutveckling med nätverkstrafikfunktioner : En jämförelse av tre mobilplattformar avseende nätverkstrafikfunktioner

The objective of this study was to examine three common mobile phoneplatforms in relation to their network traffic features. The platforms to beexamined are Android, iOS 5 and Windows Phone. After the investigation wascompleted a prototype application was implemented in order to demonstratethese features in the most suitable platform. The application will function as atelephone call exchanger. In addition, the application must also send the userstatistic to a Web server, accept contacts from a Web server, as well as having aspecial administration part in which the userstatistc can be presented.

Webbsäkerhet och vanliga brister - kunskapsläget bland utvecklare

This bachelor thesis looks at developers knowledge about web security both regarding their own view on their knowledge and their actual knowledge about vulnerabilities and how you mitigate against them. Web developers knowledge regarding web security are becoming more and more important as more applications and services moves to the web and more and more items become connected to the internet. We are doing this by conducting a survey among developers that are currently studying in the field or are working in the field to get a grip on how the knowledge is regarding the most common security concepts. What we saw was that the result varies between the different concepts and many lack much of the knowledge in web security that is getting increasingly more important to have..

Utvärdering av Raman- och IR-spektroskopi, differentiell svepkalorimetri och dielektrisk spektroskopi för materialstudier på choklad

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Montageplattform : För inredning av två vertikala ventilationsschakt i Garpenbergs gruva

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

Etnisk diskriminering i rekryteringssituationer : Hur skyddet ser ut i Sverige och vad arbetsgivare kan göra för att förhindra diskriminerande rekryteringar

Ethnic discrimination is still a problem in the Swedish employment market. The Ombudsman against Ethnic Discrimination received 154 complaints relating to discrimination due to ethnicity in the working life in 2012. In addition, reported unemployment rates in Sweden differ markedly between native-born and foreign-born. The purpose of this paper is to investigate how protection against ethnic discrimination in recruitment looks like in Sweden and describe different methods an employer may use to prevent that ethnic discrimination occurs in recruitment situations. The first and second issue of the essay concern what protection there is in Sweden against ethnic discrimination in recruitment situations, based on international and national law. The traditional legal dogmatic method, which describes the valid law, is used in these sections.

Bärighetskontroll av obundna granular material. En jämförelse mellan olika bärighetskontroller samt en alternativ utvärderingsmetod av bärighet med Lätt Fallvikt

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

<- Föregående sida 42 Nästa sida ->